Fall Follow-up Fixed Blade 30-day Challenge
-
@PitCarver said:
On a hot, late summer afternoon, nothing beats a good Honeycrisp apple from the mountains of NC.Nice pic!
That apple does look tasty. -
Prepping for the Canada trip today, so I'm not anticipating any big knife needs. I chose this Bow-legged Joe by Andy Roy for today's carry:

Poor guy is a bit abused and needs a spa day. Despite what that big scratch might imply, Andy has the steel (1095, I think) on this wee beastie treated to a high hardness. It takes and holds a good edge, but I find it a bit tricky to sharpen, actually. You might think that a simple straight edge would be easier to sharpen, but the hard steel makes keeping this straight edge a bit tricky when free-handing.
It's a three-finger design with amazing ergos and lovely handle scales (ironwood over black micarta). The blade length is almost exactly the same as a 93mm SAK's main blade. The ergo allow for an incredibly powerful cut or slice at the tip. It's a tough little knife and it sometimes gets used a bit harder than a little knife should.
It gets housed in a kydex sheath and dangles from a belt loop. (I used to have it attached to a bag, but it saw less use in that arragement. Still, I liked the little attachment system and kept it whe I transitioned to pocket carry.) Left out here, normally the knife just dangles in my pocket. It is easily pulled out one handed, so it is very convenient.

An odd looking little knife, but in hand it becomes incredibly useful. Sort of a utility knife on steroids.

Nice wood for sure!

-
@Alan K. said:
Thanks.
Now they are saying tropical storm force winds may be here around 8 tomorrow morning but they keep changing that arrival time because the storm has been lingering over the Bahamas for so long, over 24 hours.I foresee this conversation in my future:
Neighbor, "Alan, shouldn't you wait until it stops raining to fire up the generator?"
Me, "I've got to post my pictures on MTO!"I am in Orlando myself...you in the Miami-Dade area?
-
@PitCarver said:
On a hot, late summer afternoon, nothing beats a good Honeycrisp apple from the mountains of NC.Honeycrisp are some great eating apples!

-
Day 3
Ahti Juhla Finnish Puukko next to my morning read, for smaller knife, I quite like the rat tape construction which commonly found in Puukko, together with the handle, it usually result in a more balanced knife. For outdoor or wood use, I almost always prefer a true scandi grind over convex or scandivex. I think it is actually harder to make a true scandi grind, but easier for user to maintain it.

-
Prepping for the Canada trip today, so I'm not anticipating any big knife needs. I chose this Bow-legged Joe by Andy Roy for today's carry:

Poor guy is a bit abused and needs a spa day. Despite what that big scratch might imply, Andy has the steel (1095, I think) on this wee beastie treated to a high hardness. It takes and holds a good edge, but I find it a bit tricky to sharpen, actually. You might think that a simple straight edge would be easier to sharpen, but the hard steel makes keeping this straight edge a bit tricky when free-handing.
It's a three-finger design with amazing ergos and lovely handle scales (ironwood over black micarta). The blade length is almost exactly the same as a 93mm SAK's main blade. The ergo allow for an incredibly powerful cut or slice at the tip. It's a tough little knife and it sometimes gets used a bit harder than a little knife should.
It gets housed in a kydex sheath and dangles from a belt loop. (I used to have it attached to a bag, but it saw less use in that arragement. Still, I liked the little attachment system and kept it whe I transitioned to pocket carry.) Left out here, normally the knife just dangles in my pocket. It is easily pulled out one handed, so it is very convenient.

An odd looking little knife, but in hand it becomes incredibly useful. Sort of a utility knife on steroids.

I have been eyeing Andy Roy's knives whenever I go knife shopping, and hear nothing but good review about his work. This is an interesting knife shape, how thick is the actual blade stock?
I don't know whether you own the Spyderco Sharpmaker(I sworn by that), but If the stock is relatively thin(like 1/8 or less), maybe just put on a utility grind at 15 deg each side via the Sharpmaker?
-
@Alan K. said:
Thanks.
Now they are saying tropical storm force winds may be here around 8 tomorrow morning but they keep changing that arrival time because the storm has been lingering over the Bahamas for so long, over 24 hours.I foresee this conversation in my future:
Neighbor, "Alan, shouldn't you wait until it stops raining to fire up the generator?"
Me, "I've got to post my pictures on MTO!"Yes, that's the hardcore MTO spirit!

Jokes aside, knowing your background I knew you would be well equipped for this kind of situation, but please do stay safe anyway, and hope other folks in the area are better prepared this time.

-
@PitCarver said:
On a hot, late summer afternoon, nothing beats a good Honeycrisp apple from the mountains of NC.Sweet
tooth, I mean use! :D
-
Ahti Juhla Finnish Puukko next to my morning read, for smaller knife, I quite like the rat tape construction which commonly found in Puukko, together with the handle, it usually result in a more balanced knife. For outdoor or wood use, I almost always prefer a true scandi grind over convex or scandivex. I think it is actually harder to make a true scandi grind, but easier for user to maintain it.

Another nice Puuko. These are starting to get my attention!

-
@comis said:
I have been eyeing Andy Roy's knives whenever I go knife shopping, and hear nothing but good review about his work. This is an interesting knife shape, how thick is the actual blade stock?I don't know whether you own the Spyderco Sharpmaker(I sworn by that), but If the stock is relatively thin(like 1/8 or less), maybe just put on a utility grind at 15 deg each side via the Sharpmaker?
Andy makes great knives, I'll try to post a couple of others during the challenge.

The blade stock on this BLJ is a stout 3/16". I do own a Sharpmaker, but don't use it much because I prefer to freehand. Freehand sharpening does have some drawbacks (with my limited skills), but I just like to sharpen that way. No worries in this case--the BLJ takes a great edge, I just have to work at it a bit more.
I should probably just re-profile the edge on a coarse diamond stone and then progress from there. But......it's sharp now, so I'll have to wait until it dulls a bit. :D
-
Day 2


-
@Nix said:
Andy makes great knives, I'll try to post a couple of others during the challenge.
The blade stock on this BLJ is a stout 3/16". I do own a Sharpmaker, but don't use it much because I prefer to freehand. Freehand sharpening does have some drawbacks (with my limited skills), but I just like to sharpen that way. No worries in this case--the BLJ takes a great edge, I just have to work at it a bit more.
I should probably just re-profile the edge on a coarse diamond stone and then progress from there. But......it's sharp now, so I'll have to wait until it dulls a bit. :D
Wow, 3/16 is indeed stout for a smaller knife :o , but I guess small chopper is "in" right now, so this must be a fun multi-use tool to say the least. :D
Freehand is something I like to progress to do eventually, still love the consistency and great result I get from the sharpmaker, it is almost like a match made in heaven for any SAK or Spyderco enthusiast.
-
@Rapidray said:
I am in Orlando myself...you in the Miami-Dade area?I'm in Broward County, west of Ft, Lauderdale Int. Airport. As of 1 AM the storm is down to a cat 3 and I don't think it is going to be much of an issue for me at this point, but you need to pay attention up the coast and inland because it will eventually make its way north.
Day 2
Used my Explorer Tanto to open my Zippo for fueling -
@Obi1shinobee said:
Day 2
Nice fixie

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
