Make use of the hidden compartment on the new style Nylon Sheath
-
Hey Juan,
the new nylon sheaths seem to be good quality. They hold up fine so far, although I mostly carry them in a backpack.
I do carry the Surge on a belt occasionally.
No problems so far after one year for the sheath itself...

... also my stitching seems to hold up well till now. Please note that I did add a tiny drop of superglue on the inside to secure it...





Here's a before and after comparison of the mod again...


I've done the mod on a "Large" 4 pocket nylon sheath that's made for the bigger tools like the Supertool 300 or Surge.
So will this work for the "Medium" one made for the Wave too? Let's find out:
A bit stretchy with 2 bit cards as you said.
But its built to stretch on the sides and seems fine...
The width appears to be identical to the large sheath, that's good as well then...

The medium sheath is a tad shorter than the large one so the bit card will stick out a bit more than on my mod on the large one. Still looks good to me...


Basically it comes down to the stitching you do.
- Secure the corners with additional stitching, and do it at the exact spot where the current stitching is.
I could have been a bit more precise on this corner here...

- Carefully cut open the existing stitches on top....

I hope this works out well for you.
Would be nice if you report back if you decide to do it
- Secure the corners with additional stitching, and do it at the exact spot where the current stitching is.
-
Thanks for the pictures and explanation, McStitchy! Hope you don't mind if I copy your idea, since it's the best. Yesterday I checked on the sheath, and it is giving way so I think I'll be able to carry both cards with ease. Thanks again for your time!
Hahaha, it's okay since I'll be using the large one!


-
I see what you did here Matt...
You made a mod with stitches so people will think this is where your name came from

Smart move, but you're not fooling me!
-
@Juan el Boricua said:
Thanks for the pictures and explanation, McStitchy! Hope you don't mind if I copy your idea, since it's the best. Yesterday I checked on the sheath, and it is giving way so I think I'll be able to carry both cards with ease. Thanks again for your time!Hahaha, it's okay since I'll be using the large one!



-
@Mechanickal said:
I see what you did here Matt...You made a mod with stitches so people will think this is where your name came from

Smart move, but you're not fooling me!

-

Nice mod there Matt

-
Makes me wonder why they didn't do this at the factory. The old Wave sheath has a small pocket underneath the Velcro that can hold something like a small one-piece tool (I carried a By the Numbers Series 6 in mine) or a 58mm SAK. And this looks a lot more spacious of a "pocket" than that tiny little slot in the old style sheath.
-
@cody6268 said:
Makes me wonder why they didn't do this at the factory. The old Wave sheath has a small pocket underneath the Velcro that can hold something like a small one-piece tool (I carried a By the Numbers Series 6 in mine) or a 58mm SAK. And this looks a lot more spacious of a "pocket" than that tiny little slot in the old style sheath.IT IS more spacious [ as the large model is concern; it fits a bit card fully or, in my case, a detachable metal saw blade for the wave (or Charge)] as per my measurements. It is a mistery that they didn't leave it open, as (like McStitchy said) it appears that it is basically for covering up the snap, and the construction is VERY similar to the rear inner pocket.
Good thing to do for the modders to work on! >:D
Hopefully I'll be able to do it this weekend (pictures to follow if anyone's interested)! -
Following McStitchy's idea, I went from this ...




-
... to this! Loving the new bigger front pocket, the snap closing, and the quality of the new nylon (as compared to the older's). Everything fits well, and albeit LTG ditched the twin horryzontal/scout carry straps, I made do with my own strap. Really liking a LOT this sheath.





-
Thanks, McStitchy!

-
Great job Juan

-
@Fuzzbucket said:
Makes sense now... I knew you'd get there in the end... never doubted you for a minute...Nice mod by the way.


:D :D :D :D
-
-

Just to be clear, I’m not responding
to the gif below... :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


