Day by Day...a Journey down the 91mm Range
-
Day 15
We covered the LED ‘tool’ in the 3-layered Spartan Lite (day 7) and it makes another appearance in today’s reviewed SAK; the Traveler Lite.
We reviewed the Traveler back on day 8, but for a quick recap, the Traveler is basically a Climber with a digital scale that displays environmental info such as altitude and temperature, together with digital watch functionality.
The Traveler Lite adds a fourth layer incorporating an LED flashlight and inline Phillips, the latter probably the more useful of these additional tools.
This extra layer and the thicker digital scale make the Traveler Lite the widest of all the current 4-layer 91mm SAKs, even wider than some 5-layer models. But there’s no doubt that the LED and inline Phillips adds some real value to an already capable product.
Pros:
- The most feature-rich 4-layer SAK
- LED brighter than earlier generations
- Plus scales and nail file on the hook
Cons:
- A fat 4-layer SAK, not so pocket-friendly
- Does not like water
- Expensive
Bottom line:
A wide range of tools makes the Traveler Lite the dark horse of the 91mm range. If you enjoy digital functionality on a SAK, you should consider the Traveler Lite. But you may want to pass if you’re looking for something that needs a little less maintenance.

-
Nice information and photos!

Didn’t think it would be thicker than some 5 layer!
-
Yup, the same as a Huntsman Lite and quite a bit thicker than the Ranger.
-
-
Wow...

-
Day 16
Scissors are very popular across the 91mm range, and the Climber (corkscrew) and Super Tinker (back Phillips) are both excellent 3-layered SAKs with this tool.
But if you want pliers with scissors, you only have one choice in 4-layers; the Deluxe Tinker.
And while the Victorinox scissors are good at general-purpose cutting (within the size limitations), the pliers are very much a compromise based on size and strength, and should not be considered an alternative for full size pliers.
As mentioned in the Angler review, where we first came across the pliers, it’s best to consider the pliers more as ‘super tweezers’. Still useful, but you may want to pair with another multitool that has folding pliers if you expect to need this tool.
Pros:
- Good combination of scissors, pliers and back Phillips driver
- Pliers good for detailed, delicate work
- Still small enough for EDC
Cons:
- Pliers limited in strength and size
Bottom line:
The Deluxe Tinker is a great SAK if you can accept the compromise of the dinky pliers. But you may be better off with the Super Tinker and a Leatherman if you use pliers regularly.


-
@Max Stone said:
Day 16Scissors are very popular across the 91mm range, and the Climber (corkscrew) and Super Tinker (back Phillips) are both excellent 3-layered SAKs with this tool.
But if you want pliers with scissors, you only have one choice in 4-layers; the Deluxe Tinker.
And while the Victorinox scissors are good at general-purpose cutting (within the size limitations), the pliers are very much a compromise based on size and strength, and should not be considered an alternative for full size pliers.
As mentioned in the Angler review, where we first came across the pliers, it’s best to consider the pliers more as ‘super tweezers’. Still useful, but you may want to pair with another multitool that has folding pliers if you expect to need this tool.
Pros:
- Good combination of scissors, pliers and back Phillips driver
- Pliers good for detailed, delicate work
- Still small enough for EDC
Cons:
- Pliers limited in strength and size
Bottom line:
The Deluxe Tinker is a great SAK if you can accept the compromise of the dinky pliers. But you may be better off with the Super Tinker and a Leatherman if you use pliers regularly.Very nice!

-
Thanks Rapidray

-
Nice review Max!

One of the best uses of the pliers for me is taking out stubborn staples that get stuck at the tip of the stapler. -
Thanks FB
yes that’s a good use case! -
Great thread!

-
This thread is outstanding, great job!
-
Another good writeup!
If this pilers is meant to be used on nuts/bolts, I kinda wonder will we be better off to carry a separate pocket wrench, which is similar thickness to a layer and not expensive.
-
Thank you Scubadawg1, TXSAK

Hi comis, that’s a little what Wenger did with their little wrench tool, but this is also limited in the size department, so a separate small adjustable wrench is not a bad idea if you have an EDC bag to carry it in.


-
Just catching up on this thread Max and well done for keeping up with the insights. I am a Mountaineer fan, probably more Urban that rural EDC and I do like the Traveller Lite too (even with that underwhelming torch) ... just because ...

-
Thanks Fast Bill.
Yes the Mountaineer is a bit of a sleeper of the range. It’s a good SAK. -
@Max Stone said:
Thank you Scubadawg1, TXSAK :hatsoff:Hi comis, that’s a little what Wenger did with their little wrench tool, but this is also limited in the size department, so a separate small adjustable wrench is not a bad idea if you have an EDC bag to carry it in. :like:
Good call on the Wenger wrench! :tu: Oh, the pocket wrench I refer is actually the following OPT, I think it does compliment most MT quite well and a perfect pry tool as well:
New love for the Pocketwrench II
I find Pocket wrench too good
Multitool.Org Forum (multitool.ninja)

-
+10
I always get surprised about the little general interest people have on the Mountaineer, and on the "metal file and saw" too, for that matter...

The Mountaineer always was a favorite of mine on the 4 layer department. The only place i feel the Camper/Hiker or Huntsman (wood saw) is useful, is in a purely rural environment, all other situations i feel a saw might be handy, the metal saw/file always takes priority for me, besides also having 4 functions (or more, depending on one's creativity), instead of just one. It's way more useful to saw a wider type of materials than the wood saw, even if slower at that.
But than again, no sak tool is made to be nearly as effective as the actual dedicated tool it's trying to replicate, so the idea is not to be "faster" but to actually "getting the job done" when nothing else is available, and it does that very well, faster or slower :DI'd love to get my hands on a Trail Guide (or 3... :D), i'd take it for urban 3 layer EDC, over any Climber.
On a side note,
Max, thank you for creating this great thread man

A joy to read on a daily basis, especially for a cellidor (84/91mm line) die hard fan like me...
-
@Max Stone said:
Hi comis, that’s a little what Wenger did with their little wrench tool, but this is also limited in the size department, so a separate small adjustable wrench is not a bad idea if you have an EDC bag to carry it in.
I have yet to use the wrench on mine as i never come across any nuts small enough for it to fit, there was once though i thought i was in luck, the small bolt on the bottom of the fridge door was loose and i figured i would tighten it with the Wenger, but no..even that was too big for it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

:D