What did you use your Sak on today?
-
Used the Swisschamp scissors to cut a sprig of rosemary and the can opener to open a can of broth
Making beef stew! -
Great uses TXSAK

-
Used the scissors on the Handyman to remove the labels of some new T-shirts.
-
Spartan blade- bag of chips.

-
Great uses SVL and TonySal

-
The SwissChamp truly is a wonderful knife. I had to do some bathroom plumbing this morning, replacing rotted out brass pipes under the sink. I used the main blade to open packages and cut the tip off a tube of putty. Scissors cut lengths of plumbers tape. The ruler measured some plastic pipe. The wood saw cut the pipe after measuring. The tiny flathead on the backside of the knife cleaned gunk out of some pipe threads. The pliers pulled small chunks of plumbers tape and old putty out of some tight spots. The Phillips screwdriver reinstalled the tap hardware. I even used the cap lifter’s flathead screwdriver tip to pop the top off of a can of denatured alcohol. It was a full tool effort, and so incredibly convenient to have at hand.


-
Great uses Buzz

-
As soon as I opened my SwissChamp, I used the screw driver to attach the Esee Izula belt clip to the sheath. Good thing they came together or id be lost

-
Good one BM

-
@Buzzbait said:
The SwissChamp truly is a wonderful knife. I had to do some bathroom plumbing this morning, replacing rotted out brass pipes under the sink. I used the main blade to open packages and cut the tip off a tube of putty. Scissors cut lengths of plumbers tape. The ruler measured some plastic pipe. The wood saw cut the pipe after measuring. The tiny flathead on the backside of the knife cleaned gunk out of some pipe threads. The pliers pulled small chunks of plumbers tape and old putty out of some tight spots. The Phillips screwdriver reinstalled the tap hardware. I even used the cap lifter’s flathead screwdriver tip to pop the top off of a can of denatured alcohol. It was a full tool effort, and so incredibly convenient to have at hand.

Fantastic uses Buzz! That SwissChamp was really flexing its muscles today.

-
@Buzzbait said:
The SwissChamp truly is a wonderful knife. I had to do some bathroom plumbing this morning, replacing rotted out brass pipes under the sink. I used the main blade to open packages and cut the tip off a tube of putty. Scissors cut lengths of plumbers tape. The ruler measured some plastic pipe. The wood saw cut the pipe after measuring. The tiny flathead on the backside of the knife cleaned gunk out of some pipe threads. The pliers pulled small chunks of plumbers tape and old putty out of some tight spots. The Phillips screwdriver reinstalled the tap hardware. I even used the cap lifter’s flathead screwdriver tip to pop the top off of a can of denatured alcohol. It was a full tool effort, and so incredibly convenient to have at hand.

Nice usage and the only tool you needed!

-
@BadMechanic said:
As soon as I opened my SwissChamp, I used the screw driver to attach the Esee Izula belt clip to the sheath. Good thing they came together or id be lost
Nice use!

-
No pics on this one as I needed both hands to do the job, but I used the inline Philips driver on my Explorer to loosen a screw on a spring loaded hinge bracket on one of our high volume printers. There wasn't enough room to open it fully, so I had it locked at the 90 deg. position until I could swap it out for the small flat head driver on the MiniChamp that I also carry with me at work to finish the job. It was a team effort and I was able to get it back up and running without having to wait for the service technician to pay us a call.
-
Nice job Kraken

-



So my uncle dropped of his old jonsered saw for me to fix up. Needless to say the fieldmaster pulled some sak time! Big blade to chamfer the new fuel hose to make a coned fit. Hook to pull the shutoff wire through and scissors to cut the hose once fitted. My uncle bought this saw new in 1970 and it still, to this day, augers the wood chips! Fuel filter with new hose got her back up and running.Also, I had to grab a lowly needle nose to pull the fuel hose into the reservoir. Maybe I need my own Swiss Tank! (Shout out to Buzz’s Tank)
Sent from my iPhone using Tapatalk
-
Great work BClogic

-
Good Fieldmaster use BC.

-
@BClogic said:



So my uncle dropped of his old jonsered saw for me to fix up. Needless to say the fieldmaster pulled some sak time! Big blade to chamfer the new fuel hose to make a coned fit. Hook to pull the shutoff wire through and scissors to cut the hose once fitted. My uncle bought this saw new in 1970 and it still, to this day, augers the wood chips! Fuel filter with new hose got her back up and running.Also, I had to grab a lowly needle nose to pull the fuel hose into the reservoir. Maybe I need my own Swiss Tank! (Shout out to Buzz’s Tank)
Sent from my iPhone using Tapatalk
Great usage on the job!

-
@BClogic said:



So my uncle dropped of his old jonsered saw for me to fix up. Needless to say the fieldmaster pulled some sak time! Big blade to chamfer the new fuel hose to make a coned fit. Hook to pull the shutoff wire through and scissors to cut the hose once fitted. My uncle bought this saw new in 1970 and it still, to this day, augers the wood chips! Fuel filter with new hose got her back up and running.Also, I had to grab a lowly needle nose to pull the fuel hose into the reservoir. Maybe I need my own Swiss Tank! (Shout out to Buzz’s Tank)
Sent from my iPhone using Tapatalk
Great job BC! I always like to see others use of the hook. It's one of the unsung heroes of the SAK tool set in my opinion.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login