Scale variations
-
Nice collection and writeup!
[It's not failure if you learn something from it]
-
I sure enjoyed your write-up.

Which category would the Camo scales be in, maybe 23?
Some are like screen prints, but some are more like stickers that have a texture like the Black Ice series.
Edit: That #1 SAK is so beautiful!
-
That's excellent info Jazzbass, very interesting! Thank you

I've got a red cellidor (ss inlay) on a 77-79 climber (traveller) that was warped at the ends

But who knows why
This thread should be a sticky



-
@FolderBeholder said:
Which category would the Camo scales be in, maybe 23?
Some are like screen prints, but some are more like stickers that have a texture like the Black Ice series.
Edit: That #1 SAK is so beautiful!
Good point - mentally I had them in the "screen print" category but you're right - the wrap/sticker is different enough that I probably should've had it in there. I was running out of room in the frame though ;)
To be fair, you can really slice/dice this down a lot more than what I have here. For example, McStitchy's pic is a great example of early, solid core cellidor scales. Modern scales are way more hollow inside and thus "different". Then there's plus vs standard, pin vs no pin, etc.
-
@jazzbass said:
Good point - mentally I had them in the "screen print" category but you're right - the wrap/sticker is different enough that I probably should've had it in there. I was running out of room in the frame though ;)I started thinking that you've got it covered. The camo is printed or overlaid on one of the variations you listed.

-
So about the scale deterioration mentioned in my first post - take a look at this image (click here for higher res). It shows most of the major forms of scale deterioration I know of in the 84mm/91mm lines.

[list type=decimal]
-
Spartan c. 1925. These are the original fiber scales which are pretty dimentionally stable. I have many knives from the early 1900s with 4 rivet fiber scales that show no signs of deterioration or degradation. Occasionally you do see knives like this, though, with two main issues - missing emblem and lots of cracks (or both like this). The missing emblem is fairly common as it was just glued into a cut out and just works its way loose after many years of use. The cracks I suspect are a result of excessive moisture exposure - either the knife was kept in a very humid environment or actually submerged in water and not dried properly. The result is the fiber expands when wet and shrinks when it dries, cracking the scale. I believe degradation of fiber scales to be largely a factor of environment and not something within the material itself.
-
Tourist, c. 1941. Here we see a VERY common problem with the first plastic scaled knives to come out in the early 1940s. The scales on this knife have shrunk by about 20% in all directions, pulling away from the rivets and crinkling up logo. This plastic I believe (99% sure) is cellulose nitrate (CN, aka Celluloid), one of the first available plastics. By the time this knife was made, CN had been around for about 60 years and was known for two things - being the base for most films and catching on fire. Like deadly fire. As CN ages it gives of nitric acid and shrinks. The vast majority of knives you see from the early 40s made from CN have some sort of shrinkage to the scales (this knife here being one of the more extreme). Exposure to heat and UV tend to accelerate this process. Interestingly, the nitric acid given off doesn't seem to affect the knife itself - the NS liners and SS blades are fine.
-
Camper, c. 1943. This knife and the two Spartans (#4 and #5) are all from the same time period and illustrate issues with the first plastic used after CN. The plastic on this knife I believe to be some formulation of cellulose acetate (CA), a plastic also about as old as CN but with wayyyyy less tendency to burn down buildings and kill people (CA was what they started making the "safety film" of the 1950s from). CA comes in several varieties - plain CA, cellulose diacetate [CDA], cellulose triacetate [CTA], cellulose acetate butyrate [CAB], cellulose acetate propionate [CAP]. I'm not 100% clear which formulation these early CA scales are. Cellidor(tm) is a more modern trade name (1952) for CAB and CAP, and all records show that Victorinox started using the Cellidor-B (CAB) formulation in 1971 (see #9). What the exact formulation was in the 40s is unknown but tests show that it is some from of CA. When CA degrades it gives of acetic acid (i.e. vinegar), and you can see some of the effects of that in this knife. This Camper has mid-level CA degradation - the scales are still dimensionally stable but you can see the inlaid logo has tarnished. This is the acetic acid working away at the NS. The bail as well is a bit off in color in the front (compare the the rear of the knife), indicating degradation is happening on the front scale only at this time.
-
Spartan, c. 1943. Also an early CA plastic, this Spartan shows high levels of CA degradation. The logo itself is highly corroded and tarnished, and the scales have started cracking as deteriorating. The bail is also fully corroded. The rear is in even worse shape, breaking down in several areas.
-
Spartan, c. 1943. Same knife and production period as #4, this knife is interesting because it shows that the CA deterioration to NOT be endemic of all CA scales (the way it was for CN), but seemingly random within batches. On this knife, the rear scale has undergone severe degradation while the front scale is fine. From the front this looks like a well preserved mid 40s knife - from the back things are terrible. Out gassing of acetic acid on this knife is so bad that the corroded through the bail and rusted the stainless steel main and pen blades (see the black areas on the rear view of the knife).
-
Elinox Spartan, c. 1960. Victorinox seems to have worked out this CA issues by 1950 and the formulation they switch to in 1957 on the "Victoria" line with the hidden rivets is very, very stable (I've never seen any degradation of the standard dark red Victoria scales used from 1957-1970). The Elinox line, unfortunately, seems to have gotten a cheaper quality CA plastic (probably a form of CAB) and knives like this are not uncommon. This knife in particular is one of the worst and it shows a lot of the same signs of acetic acid degradation that the mid 40s knives above show. The logo and bail are tarnished, the SS tools are corroded, and the scales are cracking apart. Additionally the dyes in the plastic are leeching out turning the bright red into an orange color. Like with the 1940s CA, this degradation seems to be batch related as the rear scale of this knife is completely fine.
-
Fischermesser, c. 1964. While the dark red Victoria scales from the late 50s/60s are excellent, the blue scales are hit and miss. This would imply that the blue plastic at this time is a CAB formulation closer the to CAB of the Elinox scales vs. the CA (?) formula of the Victoria scales. Many, many blue scale knives from the 60s (Fischermesser in particular) show some sort of acetic acid degradation - this knife in particular is on the extreme mild end of the scale (slight tinge of tarnish around the logo). I have had Fischermessers whose scales have completely degraded, rusting the tools and completely crumbing into dust.
-
Elinox Spartan, c 1965. This was a custom advertising knife made in the mid 60s for Semperit. It uses the same CAB blue scales as the Fischermesser and shows an extreme form of degradation. The logo is completely tarnished and green, the SS tools have been rusted (the the back shot of the corkscrew and the blades) and the front scales is starting to break down completely.
-
Fieldmaster, c. 1972. This is one of the earliest Cellidor brand CAB scales. Victorinox drops the dark red scales of the 60s and moves to these... and they're not really that good. They seem to be a slightly more stable version of the CAB Elinox scales from the 1960s, but these (Cellidor from the early 70s) are known have tarnishing issues around the logo and (more commonly) to pull up at the ends - especially the T&T end. If you look close in this picture you can see the bottom of both the front and rear scales pulling up (even slightly cracking the front scale by the tweezers). Very common for scales of this era. They seem to have worked the formulation out by the mid 70s and by 1980 the scales are extremely stable.
-
Cadillac, c 1973. Another example of early 70s CAB. Slight tarnish on the edges of St Christopher and bad warping on the rear scale by the toothpick.
-
Motorist scale c. 1968. Scale-only view of a severely degraded Elinox CAB scale. This scale got so bad I removed it from the knife before it destroyed the knife itself. Severe corrosion of the logo and plastic, loss of color in the scale (it's orange) and in the center especially. Keep in mind this scale started out the same color as the Cadillac to its left!
-
-
#10 is on my list to acquire - I have never seen one, or held one in person. It is one of those knives you buy because of the scales!

-
That’s an impressive collection! Will glow in the dark counts as a variation or does it fall into one of these variations?
-
Very well done jazzbass!

Great pics and descriptions of the various scale variations.

-
Wow! Great info & nice pics!

-
Do you consider the blue alox knives made for the Dutch air force to be a different variaton, or do you discount them for being non-standard?
-
Excellent read Jazzbass!
Sent from my iPhone using Tapatalk
-
Always learn so much when JB posts

-
This is really great JB - Thanks for taking the time to construct all this.
We spend so much time talking about the tools and the tool evolution - It's really good to see the scales get some air time.
And as always so much knowledge and info to suck up.
BTW. You must be a chemist in your other life - Right? - All this formulation stuff

-
@Reinier said:
Do you consider the blue alox knives made for the Dutch air force to be a different variaton, or do you discount them for being non-standard?I consider them to be a proper variation and different from the #3 aluminum scales in the first image since they are anodized and the pre-war aluminum stuff is not. I didn't include it in this shot because I don't have one unfortunately.
-
Some more scale variants. First one is original tortoiseshell
-
Those are awesome.
-
@wengercollector said:
Some more scale variants. First one is original tortoiseshellVery nice! I like that 2nd one in, the horn

-
@jazzbass said:
I consider them to be a proper variation and different from the #3 aluminum scales in the first image since they are anodized and the pre-war aluminum stuff is not. I didn't include it in this shot because I don't have one unfortunately.
@wengercollector said:
Some more scale variants. First one is original tortoiseshellOh my, those are really nice. That crossbow logo should be re-introduced!

-
Added this to the SAK ID thread

/post/1630522Thanks JB
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login