Let me see your homemade sheaths!
-
Nice work!
[It's not failure if you learn something from it]
-
Forgot to upload this here.. But here it is, my first real sheath. It's a sheath for a bacho lapplander saw and it has a normal belt loop and a optional dangler


[It's not failure if you learn something from it]
-
Great work guys!
Sent fra min FRD-L09 via Tapatalk
-
@kottskrapa said:
Forgot to upload this here.. But here it is, my first real sheath. It's a sheath for a bacho lapplander saw and it has a normal belt loop and a optional dangler

[It's not failure if you learn something from it]
WOW! Your stitching and general leather work is so clean!! I tip my hat to you.
BTW - Yellow SAK..my favorite. I have a bunch and EDC a yellow Huntsman!
-
@spudley112 said:
WOW! Your stitching and general leather work is so clean!! I tip my hat to you.BTW - Yellow SAK..my favorite. I have a bunch and EDC a yellow Huntsman!
Thanks [emoji846]
[It's not failure if you learn something from it]
-
@spudley112 said:
Here is a sheath I form fitted to my AG Russell Arkansas Hunter. I used the knife to outline the leather, then, after the sheath was completed, I dipped it in a bowl in which I poured boiling water. I wrapped the knife well in saran wrap and put it into the sheath. After drying, I burnished the edges, and used a deer antler to shape the sheath to the knife. I finally treated the leather with mink oil to condition it. The knife now snaps into the sheath like it is made of kydex.Keep in mind, boiling leather can be a tricky business, I have had sheaths shrivel up like a salted slug. Also, make sure the sheath is 100% dry before carrying your knife in it.


You should wet mold the leather before stitching the sheath together. This ensures you get a better fit and avoid those shrivelling up problems.
Great job on your projects!

-
@BCNZ said:
Read through this thread last night. Some really good work here!
I've been looking at leather pocket slips online for the last few months. Lots of companies on Instagram and Etsy making some nice items. Most of them are US or Europe based and with exchange and shipping would cost more than I'm willing to pay, so I purchased a leather stitching kit (for half the cost of a slip) and thought I'd have a go at making some myself.
Here's the result:
I'm pleased. The knife and light fit really well, and I had fun making them. I do have some questions if anyone wants to answer them...
I didn't glue the edges together. Do you guys glue before you stitch? If so what glue do you like to use?
I burnished the edges where the stitching is with water and saddle soap, then rubbed on some beeswax based leather care product (I use it on my work boots usually). I'm assuming having glued edges makes the finished burnished edge look way better. Would it work better to burnish the edges first then glue and stitch?, as now that it is stitched I can't burnish the top edges. Any tips on burnishing?Love those models. Well done!

-
The shriveling showed up when I boiled the leather. I think I should have squeezed it between pieces of closed cell foam until it dried.
-
Homemade leather slip case for EAB Lite and replaceable scraper blade.
Although it is only my fourth attempt at slip cases, I'm quite fond of how it ended up. Made from an old leather coat.



-
Nice! Knife slips can be handy.
-
Thank you, spudley.

Yes they can, specially if there's the risk of the knife "self-open" in pocket or bag!
-
Life are busy but manage to get some time on my hands while the kids are in school yesterday and remember a project I started but never finished. One of the first sheath I did was a horizontal one for my spirit x. I wasn't happy with the model, fit or my work so I decided to do a new one. I wanted a horizontal sheath that was slightly tilted and really low profile. This is what I ended up with. I carry it on my belt at one o'clock and don't feel it at all and have actually been checking if it is still there and because it's tilted it's not in the way putting my phone in and out of the pocket.

I did some more finishing and fixed the belt holes after the pics were taken

It looks a bit bulky but that's not what it looks like or feel in real life

[It's not failure if you learn something from it]
-
Very nice job!
JR -
Y'all are very talented. I've made some leather items and they are no where near the quality y'all produce.

-
@MadPlumbarian said:
Very nice job!
JRThanks! I think this is the first project that I'm sort of satisfied with..
@Aloha said:
Y'all are very talented. I've made some leather items and they are no where near the quality y'all produce.
That's pretty much how I feel too. But I guess practice, practice, happy mind and some more practice will do the trick
[It's not failure if you learn something from it]
-
Good!
JR -
My bonus son had his new buscard loose in his backpack and have a tendency to loose stuff so he asked me if I could make something so he could tie it to his backpack. His mother asked to make it simple but sturdy so here is what he got.
The other end of the paracord is tied inside his backpack

Not a knife or Mt sheath but a card sheath.. Does it count?
[It's not failure if you learn something from it]
-
Counts for me! Great work!

-

Sent fra min FRD-L09 via Tapatalk
-
Oh it counts! Nice work, clean, simple, effective, and I'll add classy

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



