Bedside flashlight?
-
@comis said:
Thank you for an awesome writeup!I looked up this light after your initial post, and saw a pretty decent offer on this light when I was out shopping for tools. Next thing I knew I was totally distracted and came home with a new light.
:DIsn’t that the way it happens. Congrats on a nice light.
-
@chip said:
I am also toying with keeping an air horn upstairs to be used in conjunction with the torch in hope it makes the burglars leave posthaste.
As in the uk tackling a burglar can get you in more trouble than them.Sounds like a sticky situation, I always say the best conflict is no conflict. For home security, I did install surveillance camera where appropriate, and put up signs to discourage thief from trying.
-
-
@Sos24 said:
I used six 1.5x6 tritium vials, putting two in each slotThanks for that!

I read the review where they say the slot is 2.2511.5mm(unconfirmed), I find a seller where they could provide me both 212 and 1.56, but am now really curious why two 1.56 will fit when the 2*12 may not?

Maybe I would go ahead and get some for both sizes, since they are probably applicable to the scale mod you'd mentioned in another thread. :D
-
I read the review where they say the slot is 2.2511.5mm(unconfirmed), I find a seller where they could provide me both 212 and 1.56, but am now really curious why two 1.56 will fit when the 2*12 may not?

Maybe I would go ahead and get some for both sizes, since they are probably applicable to the scale mod you'd mentioned in another thread. :D
From what I understand the 2x12 sat too high in the slot (slot not deep enough ).
Here is a picture from the SkyLumen page showing the six 1.5x6. His thread on another forum is how I found out the 1.5x6 work.

-
Ahhh...I see. Thanks again for this picture, perfectly illustrate how the 1.5x6 will sit in the slots. I think I will just go along the same way with the trit setup.
I played with it last night along with my Pak-lite, and I'm already in love with the lows on this light.
Now I am just starting to think about whether it is possible to put a little flare at the front, possibly a thin GID o-ring between the glass/refletor, or possibly some small tritium/GID epoxy around the chip? If someone comes up with a bezel with tritium slots, that'd be cool too.
-
I have a Thrunite TN-12 on the bedside table. I usually use a BLF A6 SE of which I have 3 or 4 so this one got relegated to bedside table duty. It's a good light and the 18650 battery means I can easily have it on the entire night without worry.
-
@pomsbz said:
I have a Thrunite TN-12 on the bedside table. I usually use a BLF A6 SE of which I have 3 or 4 so this one got relegated to bedside table duty. It's a good light and the 18650 battery means I can easily have it on the entire night without worry.I remembered we briefly talked about BLF A6 SE, maybe in another thread? This is a good value buy, and it kinda reminds me that we do live in the golden age of gears, where there is no shortage of goodies, but money. :D
Right now, both the newly acquired Jetbeam RRT-01 and Pak-lite are both on my bedside table, and it really is a tough call between these two.
-
Malkoff AA. Very nice firefly mode.

-
Just a quick update, since then I acquired a Jetbeam RRT01 (2019), and had been really pleased with it's performance, especially the infinite steps rotary dial and the ultra low output. I just put in 6 1.5*6 orange tritium and sealed it with epoxy resin. Now I am looking forward to testing it tonight. Compares to green and blue, orange tritium is dimmer but that's exactly why I chose it for this new bedside light.


-
Nice light comis. I usually put my Olight S1R and ZL on my night stand. They are easy to reach in pitch dark room since I always place them in the same spot. I like having low lumen or max power as needed.
-
Great lights in this thread!

Been carrying a JetBeam TC-R1 since 2012. A while back I added a 'glocator' to it's lanyard recess. Simple industrial , glow in the dark , egress tape that has been punched to fit. Waterproof and lasts easily over 12 hours for night adapted eyes. Easy peasy to locate on the stand in the wee hours.
-
Nicely done with the GID tape.
-
That does look great! Thank you for a very cool and applicable idea for bedside flashlights!
-
@comis said:
That does look great! Thank you for a very cool and applicable idea for bedside flashlights!Thanks, I really like tritium, but I seem to eventually break them all :(
With this, it's just some hollow punches and voila.
Glo-nation sold the good stuff, by the foot, but it seems they have closed up shop. -
Fenix TK12.
There is no memory mode on this light, it always comes on in high mode.
-
@Archibald Tuttle said:
Thanks, I really like tritium, but I seem to eventually break them all :(
With this, it's just some hollow punches and voila.
Glo-nation sold the good stuff, by the foot, but it seems they have closed up shop.Hope to find it else where when needed...
@Millhouse said:
Fenix TK12.There is no memory mode on this light, it always comes on in high mode.
I thought they have dual stage adjusted by the twist of head, so you could choose to low output by default? Or you'd prefer to keep a bright light by the bedside?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D
