Day by Day...a Journey down the 91mm Range
-
Max, on your Expedition Lite knife, is the housing of the light part grey or clear? Mine is grey, but I understand there is a clear housing on some. Someone here on MTO posted a photo of the clear housing and I've wanted it ever since.
-
The one that went back to the factory was grey, not seen what the new one is yet but hopefully will know next week!

Day 24
I am skipping the last 6-layered SAK; the Expedition Lite. Only because the one that should be the focus of today’s attention had to go back to the factory, and hopefully its replacement arrives this week...so it will still get its chance to shine before the challenge is over.
So the next SAK up for consideration is the largest of the officially named CyberTools, the CyberTool L or CT-41.
And while the CyberTool Lite, M and S models are all directly related to one other, the CT-41 is closer to the Handyman than to its CT siblings.
In fact, the CT-41 can be considered a Handyman with the bit driver tool layer added. So it keeps the Handyman’s great tool load of blades, openers, file/metal saw, wood saw, scissors, pliers and five back tools.
It’s because of this relationship to the Handyman, itself so close to the Swiss Champ, that many see the CT-41 as the modern alternative to the Swiss Champ. And it’s identical in width to the Swiss Champ, so while you lose the fish scaler and magnifier, the inline Phillips is replaced by the very capable bit driver.
It’s easy to assume that the CT-41 is the biggest of the CyberTools, especially as it’s called the CyberTool L, but as the pictures below show, the CyberTool Lite is wider that the CT-41 by quite a margin due to the LED module.
Pros:
- Very capable alternative to the Swiss Champ
- Good bit driver
- Plus scales and accessories
Cons:
- Bit driver offset from center so not as easy to use as those on other CyberTools
- Difficult for pocket carry due to size and weight
Bottom line:
The bit driver is one of the newer tools created by Victorinox, and it’s a little at odds with the rest of the SAK tools that blend in more seamlessly. But putting this aside, the CT-41 is the only real alternative to the Swiss Champ, if you are looking for the most functionality in a body that’s no wider.

-
@Max Stone said:
Ha! Thanks jph_777, you made me laugh!
I’m not with Vic. Just a good relationship with the Vic agent in South Africa. Although every time I’m in their shop I inevitably end up talking to other customers and being asked the same :D
I’m actually one product short in the current 91mm range, that’s a story by itself. The shop has most of their Victorinox SAKs displayed along one side of the shop, but they keep the limited editions and larger ‘collectors’ editions behind glass.
For about six months I’d been eying the Expedition Lite that they had in a display cabinet, tools closed up but resting against the expedition kit pouch it comes with. It was the only unit they had, so I eventually committed to buying it.
As standard practice, I always go over a new SAK in the store to ensure all is well, and while the salesman was off looking for the original box, I had some time to inspect the SAK.
So it was a shock (for me and the salesman) when I discovered that the tip of the large blade was bent. Someone must have dropped it point down in the shop at some earlier time.
It had to go back to the factory and a replacement ordered, which I’m told should arrive this week. Hopefully still within my 30 day challenge window!

I hope it does also!

-
Very nice CT-41

-
I finally found some time to read all the posts, and it is an amazing read!
Very well written and very informative. Good job Max

I will take the opportunity to ask a question: What do you guys use the backside chisel for? So far I have been unable to find a suitable use for it. No way to use it for its intended purpose

-
@SirVicaLot said:
I finally found some time to read all the posts, and it is an amazing read!Very well written and very informative. Good job Max

I will take the opportunity to ask a question: What do you guys use the backside chisel for? So far I have been unable to find a suitable use for it. No way to use it for its intended purpose

Paint/sticker scraper?
-
Love the Handyman review. I’ve been considering getting one, but not sure why to choose over just getting theSwissChamp.
-
Kudos Max, what a great series of reviews! I keep enjoying my daily fix and will be sad when this challenge comes to an end. Hope you will take us on another journey then, maybe down the discontinued 91mm range?
Will you crown your personal winner at the end of the month? It would be interesting to know which 91mm is your personal favourite and why.
Keep up the good work!

-
Nice CT-41 review Max!

-
@Simon_Templar said:
Kudos Max, what a great series of reviews! I keep enjoying my daily fix and will be sad when this challenge comes to an end. Hope you will take us on another journey then, maybe down the discontinued 91mm range?Will you crown your personal winner at the end of the month? It would be interesting to know which 91mm is your personal favourite and why.
Keep up the good work!

I second that, maybe top three and why?

Someone from Vic should hire this man, definitely one heck of an enabler! :D
-
@Sos24 said:
Love the Handyman review. I’ve been considering getting one, but not sure why to choose over just getting theSwissChamp.The Handyman has the essential tools. The additions on the SwissChamp are more like gadgets to me that I can live without. The dedicated Phillips is great, but the can opener does a good job on screws already. The magnifier is nice to have, but nothing I really need. It is more for fun. Same goes for the fish scaler. While those three tools have their merit, I feel like they are just additions to the essentials.
-
Nice and comprehensive reviews Max.
It has been a pleasure for me follow this topic.
Good job!Enviado de meu moto g(6) usando o Tapatalk
-
@SirVicaLot said:
...I will take the opportunity to ask a question: What do you guys use the backside chisel for? So far I have been unable to find a suitable use for it. No way to use it for its intended purpose
Thanks Hevy, comis, VICMAN, sos, TXSAK, Rapidray and Sir Vic for all the positive feedback and discussion. Top picks may just go into a poll at the end, as we could keep this discussion going a long time...

On the back chisel, I guess it’s a little like the corkscrew, fish scaler and awl. One of those multi-purpose tools that rarely gets used for its intended purpose, but is nice to have if you need it. As a flat, short blade, it could be used to scrape against a flat surface to lift something off. A mini-paint scraper is a good analogy.

Day 25
At some time, around 70 years ago, Victorinox realized that there was a market for a multi-layered Swiss Army Knife. Not just the garden-variety three or four layers like they did in the 1940’s, but jumping to six layers. Something that included all the major tools available across the product line, in one medium-sized pocket knife.
This was the ‘52 Champion. And it was exactly that, for over 30 years (with a mid-life upgrade to 7 layers). The flagship of the 91mm range, evolving together with the tools as they were developed and improved over time.
Then in late ‘85, Victorinox launched the Swiss Champ (the name no doubt derived from its predecessor, which continued in production until recently). And today, almost 35 years later, the Swiss Champ is still considered the flagship, even though there are bigger 91mm models available, and even mainstream models, like the CyberTools, with more functions.
But there’s a sense of completeness, like a well-written symphony, about the Swiss Champ. Holding one never fails to impress, to the point where we can excuse some of its shortcomings, like its sheer size and weight.
I carried my Swiss Champ today on a short suspension clip, and it rides quite comfortably in my pocket. It’s probably true that I’ll never use all tools in a week, or even several months, and I could probably rotate a dozen smaller SAKs every day and get by. But there’s something undeniably special about carrying a Swiss Champ.
Sure, the fish scaler won’t get used to scale fish (by anyone), and I would probably not want to assemble IKEA furniture with the inline Phillips. But the point is; with the Swiss Champ, you can. And with 8 layers, 64 individual parts, 16 folding tools that I won’t name here, 5 removable tools and 33 functions, there’s a lot more possibilities with this, the champion of Victorinox.
Pros:
- All the tools you’ll almost never need in one package
- You can pocket EDC if you’re passionate about your SAK
- The reward of owning one
Cons:
- Overkill for most people
- Lives a little on its reputation
- Size makes some tools awkward to use
Bottom line:
It’s really hard to be critical about a product that has been refined over several decades. Many of the tools are quite compromised due to space limitations, but each functions as well as can be expected...sometimes better, and the quality of the fit and finish is top-class. It’s difficult to have an interest in Swiss Army Knives and not own a Swiss Champ, but it’s just as difficult to justify whether you need 33 functions in your pocket.



-
Another informative review, thank you Max!

The SwissChamp was the second knife I ever bought and still have. I bought the one with the SOS kit. -
I want a Swiss Champ, but haven't pulled the trigger yet...
Sent fra min FRD-L09 via Tapatalk
-
Great review of the Swisschamp

-
@Max Stone said:
Then in late ‘85, Victorinox launched the Swiss Champ (the name no doubt derived from its predecessor, which continued in production until recently). And today, almost 35 years later, the Swiss Champ is still considered the flagship, even though there are bigger 91mm models available, and even mainstream models, like the CyberTools, with more functions.Great review of the SwissChamp Max!

-
Once again you have perfectly summed up the model you are reviewing Max, its history, evolution, cabability, usability, and place in the range
- I agree with every word you wrote, especially the carry comments.
When you have a SwissChamp in your pocket you feel like you can cope with anything and conquer the world. :D
Althought I must admit, when I bought my first couple of SAKs many decades ago - I did think that the SC was a bit ridiculous (....ly big) and 'over the top'
Since my SAK/MTobsessionhobby started about five years ago - I have changed my mind ....- Although I rarely carry the SC - It is in my 'EDC rotation' and love to have it in my pocket.
Who, like me, thinks the Vic pliers came about as a direct response to the Leatherman PST? ???
As we know, back in 1983 the LM PST was a redefinition of the pocket knife - *In Tim Leatherman's own words *- Although later, of course, went on to define a whole new genre of pliers based multitools
My belief is that in 1983/4 Vic thought "Sh1t - We'd better get something to compete with this PST"
(Or is that sheisse? ;) - Actually neither - As Vic is a highly moral company and I doubt that they swear!!) - Hence the pliers and the SC in 1985
The timing is too close to be anything else !!
And of couse, ten years later, as the pliers based tools became even more successful, they brought out the Swisstool.
-
You may have missed your calling! I enjoy your write ups and always find them educational at the least. Well done!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login