Fall Follow-up Fixed Blade 30-day Challenge
-
Kept my granddaughter for 12 hours today... Managed to get a shot out on the porch.

-
@PitCarver said:
Kept my granddaughter for 12 hours today... Managed to get a shot out on the porch.Very good

-
Day17
Koster Knives 3V. This is an interesting knife, with a full flat grind but with very thick spine, a little less than 1/4 stock(think BK2). So it is hefty in hand, balance is somewhere between the index and middle finger, so it is ok. I often compare this to my survive knife GSO 4.0, and think about their different geometry. Is it necessary to use 1/4 stock when it is 3V? Or was it a geometric design and it ends up at closer to 1/4 stock? I guess that is what makes the hobby interesting.
The sheath is really well made by KSF, but the design makes the knife ride high above waist and less than optimal to carry. Most third party dangler probably will not work with this sheath, and I still gonna figure out a way to better carry this.

-
@comis said:
Koster Knives 3V. This is an interesting knife, with a full flat grind but with very thick spine, a little less than 1/4 stock(think BK2). So it is hefty in hand, balance is somewhere between the index and middle finger, so it is ok. I often compare this to my survive knife GSO 4.0, and think about their different geometry. Is it necessary to use 1/4 stock when it is 3V? Or was it a geometric design and it ends up at closer to 1/4 stock? I guess that is what makes the hobby interesting.The sheath is really well made by KSF, but the design makes the knife ride high above waist and less than optimal to carry. Most third party dangler probably will not work with this sheath, and I still gonna figure out a way to better carry this.
Ooooh, nice knife! Approximately a 5" blade?
I think I have the same model:

Terrible picture, but it's dark here, now. Sorry.This sheath is a handmade sheath from Wasteland Leathercraft (if I'm reading the stamp correctly). A nice sheath, well made. However, this version also keeps about 1/2 the handle above the belt. I actually like that (except when using a backpack with waist belt).
I think if you wanted a lower riding sheath, one with a fold over belt loop could serve you well. Without going full on dangler.

-
I'm not sure why the thicker stock was used. It does seem heavy. I think this was designed as a 'bushcraft' knife and was meant to be tough. I will say, the 1/4" stock (mine seems a little thinner than 1/4", but not by much.) and FFG make this knife a good performer when batonning wood for splitting. Like using a splitting wedge. :D
-
@Nix said:
Ooooh, nice knife! Approximately a 5" blade?I think I have the same model:

Terrible picture, but it's dark here, now. Sorry.This sheath is a handmade sheath from Wasteland Leathercraft (if I'm reading the stamp correctly). A nice sheath, well made. However, this version also keeps about 1/2 the handle above the belt. I actually like that (except when using a backpack with waist belt).
I think if you wanted a lower riding sheath, one with a fold over belt loop could serve you well. Without going full on dangler.

Small world!

I think we do have the same model, and while I was getting mine, I secretly wish they could have used two lanyard holes design, which the later iteration does include that feature.

Yes, it does feel heavy in hand, not BK2 heavy, but still noticeable. I think the KSF sheath rides higher, I got two inches of handle poking out of the sheath. I too do think a loop over design might be better. I love dangler design so as long I am not running with the knife or it doesn't 'dangle' too much. At least getting out of the way whenever I am driving or sit down would be nice. :D
-
@Nix said:
I'm not sure why the thicker stock was used. It does seem heavy. I think this was designed as a 'bushcraft' knife and was meant to be tough. I will say, the 1/4" stock (mine seems a little thinner than 1/4", but not by much.) and FFG make this knife a good performer when batonning wood for splitting. Like using a splitting wedge. :DI haven't put this knife into any hard use(mainly due to its sheath), and I would believe what you said is definitely true.
I always like what Mors Kochanski's school of thought about ourdoor living and survival, and IIRC, most of his life he just used a knife similar to a Mora for teaching. And ever since I've done a semi-destructive batonning test on my Mora Bushcraft survival (3mm/ 1/8 stock) couple years ago, I am now a firm believer a humble Mora can do a lot more than what we give it credit for, and a good outdoor knife can also be thin stock while getting jobs done admirably.
-
Day 17:
Pocket dump

Sent fra min FRD-L09 via Tapatalk
-
Day 17
Time for a touch up


-
Day 17: Went back to work after a long weekend of house projects. I'm really itching for some Trail time!

-
Yes indeed RF!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



