Fall Follow-up Fixed Blade 30-day Challenge
-
damn it , i forgot post yesterday hahahaha
oh well either i quit this one.. or keep going .. 
-
Koster Knives 3V. This is an interesting knife, with a full flat grind but with very thick spine, a little less than 1/4 stock(think BK2). So it is hefty in hand, balance is somewhere between the index and middle finger, so it is ok. I often compare this to my survive knife GSO 4.0, and think about their different geometry. Is it necessary to use 1/4 stock when it is 3V? Or was it a geometric design and it ends up at closer to 1/4 stock? I guess that is what makes the hobby interesting.
The sheath is really well made by KSF, but the design makes the knife ride high above waist and less than optimal to carry. Most third party dangler probably will not work with this sheath, and I still gonna figure out a way to better carry this.

That is kinda neat looking. And a full flat grind.

-
@Nix said:
Ooooh, nice knife! Approximately a 5" blade?I think I have the same model:

Terrible picture, but it's dark here, now. Sorry.This sheath is a handmade sheath from Wasteland Leathercraft (if I'm reading the stamp correctly). A nice sheath, well made. However, this version also keeps about 1/2 the handle above the belt. I actually like that (except when using a backpack with waist belt).
I think if you wanted a lower riding sheath, one with a fold over belt loop could serve you well. Without going full on dangler.

Very nice!

-
@comis said:
I haven't put this knife into any hard use(mainly due to its sheath), and I would believe what you said is definitely true.I always like what Mors Kochanski's school of thought about ourdoor living and survival, and IIRC, most of his life he just used a knife similar to a Mora for teaching. And ever since I've done a semi-destructive batonning test on my Mora Bushcraft survival (3mm/ 1/8 stock) couple years ago, I am now a firm believer a humble Mora can do a lot more than what we give it credit for, and a good outdoor knife can also be thin stock while getting jobs done admirably.
My son would agree with you on that!

-
@Obi1shinobee said:
damn it , i forgot post yesterday hahahaha
oh well either i quit this one.. or keep going .. 
As the Japanese say: “Nana korobi, ya oki” * (fall down 7 times, get up 8.)*
-
@Nix said:
Mors is quite the guy. More than any other Bushcraft instructor, he seems to have lived what he taught. I think he started out using a folding knife, then switched to a fixed blade. I think his school used Moras for a while (maybe still does). So, yes, no doubt the Mora collection is solid.Later he designed the 'Skookum Bushtool' with Rod Garcia. Well, Rod is from Montana, so I figured I needed one of those. Rod and I exchanged a few emails and I got on the job list for a Skookum, but it never happened. I think Rod had some health issues and may not be making knives anymore. Probably just as well for my bank account. And I have a knife or two (including a Mora) that could fill in if need be. :D
Ahhh, I remembered checking out the Bushtool, and hearing a lot of good things about those. I don't know Mr. Garcia, but do hope he would do better afterwards.
Another candidate knife from a good instructor is the Ray Mear's bushcraft knife, but it also cost a pretty penny. Sometimes being a SAK/knife/tool nut often give me the guilty feeling that I might have collected/brought one too many, and may not fully use those tools to the full extent to get my money worth.
:D -
@Nix said:
As the Japanese say: “Nana korobi, ya oki” * (fall down 7 times, get up 8.)*No further truth than that!

@Obi1shinobee said:
damn it , i forgot post yesterday hahahaha
oh well either i quit this one.. or keep going .. 
Keep going, of course! :D
-
FTFY! :D
-
Day: 17
Today's carry is a fantastic little EDC that has a lot of belt time with me:

This is a Koyote Mini-Nessmuk. The handle is the same size as an 85mm SAK, but the blade is the same size as a 111mm SAK (actually, the cutting edge is longer than on a 111mm SAK). I don't remember what the steel is here, might be 1084 might be L6. Koyote mostly used medium-carbon steels. The edge, well polished as you can see, gets razor sharp and I think the convex bevel means it holds an edge relatively well for the steel. I don't think I'd use this to trim carpet or cut dry wall, but it is a great EDC.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


It looks pretty sharp...