Day by Day...a Journey down the 91mm Range
-
@Max Stone said:
Thanks fullbreakfast and kamakiri :hatsoff:Day 29
Before we wrap up the 30 day challenge, we’re rewinding almost to the beginning, back to the Spartan we covered on Day 2. Not just any Spartan, but the Spartan PS.
Unlike a black oxide finish, the Spartan PS has a shimmering black Polispectral finish created by immersing the stainless steel parts in a hot chromic-sulphuric acid solution and following this with a cathodic hardening treatment in another acid solution.
The colouring process chemically thickens the passive chromium-oxide layer that gives stainless steel its corrosion resistance. And the colours are produced by the interference that occurs as light waves pass through the transparent passive layer.
Being colourless, the chromium oxide layer is not susceptible to fading by ultraviolet light and, as the colouring process does not involve pigments or colouring agents that might bleach or fade over time, Polispectral stainless steel has a long life. Plus it does not rub off on your hands like black oxide.
A particular attraction of the Polispectral finish is that it appears to change colour under different lighting conditions and angles. It’s not particularly noticeable on the Spartan PS, but it does change though light grey, charcoal and to a deep black at different angles.
A downside is that the finish cannot be repaired if scratched, so while it is attractive on a Swiss Army Knife, it will get worn with use and these wear marks cannot be removed by polishing or refinishing. Victorinox even warn about this characteristic.
Victorinox charge a hefty premium for their Polispectral SAKs. Currently they offer it only on the Spartan, with white, black and camo scales. (And Man on the Moon LE).
I covered a more in-depth review of the Polispectral technology back in April in this rather long post:
Polispectral vs. Black Oxide
I recently picked up a new Spartan PS, with the Polispectral finish on the stainless steel. Not having heard of this finish before, I thought a little resear...
Multitool.Org Forum (multitool.ninja)
Pros:
- Unique black tools very attractive
- It’s still a Spartan
Cons:
- Polispectral coating cannot be repaired
- 3 x the cost of a standard Spartan
Bottom line:
There’s no denying the attraction the Polispectral finish creates on the Spartan PS, but it’s a serious premium that is difficult to justify. Still a very nice shelf queen...Very nice BO :like: :cheers:
Nice review. Am going to miss your reviews thats for sure! :cheers: -
Nice review, Max!
I had no idea how this works. -
Thank you Rapidray, Sir Vic.

-
Day 30
What has 15 layers, weighs 12.6oz (356g) and is 2.5in (65mm) wide? As it’s Day 30, you’ve probably guessed...the Swiss Champ XAVT.
This is the largest 91mm SAK in the current range, adding 4 layers to the already large XLT, and comfortably doubling the width of the Swiss Champ. It’s like you glued two Swiss Champs together!
Surely this is too large to use and carry? But people do. It has an oversized leather case for belt carry, and while you need to stretch to get your hand around it, the tools are usable. It’s just a little cumbersome and heavy in the hand. Victorinox market the XAVT as geared for collectors, and I guess they’re right.
So what’s added to make up the extra layers? As most people are familiar with the Swiss Champ, I’ll discuss what’s extra compared to this model.
First there’s the digital scale with LCD display. Then paired to the inline Phillips is a universal wrench, the design borrowed from Wenger. It has two bit drivers, with an extra 4 bits not found on the CyberTools. The LED is the new transparent housing version with a much brighter and usable LED. Then there’s the very nice large serrated blade. This is from ‘new old stock’ as it has the older crossbow logo on the tang. Paired to this blade is an inline awl, like those found on the Alox Pioneers. (This is my favourite layer on the XAVT).
There’s the short pruner, electrician’s blade and pharmaceutical spatula as found on the XLT. And just for good measure, there’s a combo tool and a watch case opener.
The back has two hooks, one with the nail file, and two 2.5mm drivers. Along with what you’d expect, such as corkscrew (plus mini screwdriver), awl and chisel. The bottom scale houses the tweezers, toothpick, pen and pin...the same scales as found on the Traveler and other digital SAKs.
The total count of functions varies depending on where you look, between 80 and 83. Compare this to 33 for the Swiss Champ and 50 for the CyberTool L and you get and idea of just how impressive this monster really is.
But there’s some tool duplication, so a re-count of actual functions, with less creative license, tops out at 70. Still very impressive!
- Toothpick
- Tweezers
- Pressurized Ballpoint Pen
- Stainless Steel Pin
- Thermometer (C/F)
- Digital Watch (12h/24h)
- Alarm
- Countdown Timer
- Stopwatch
- Altimeter (m/ft)
- Barometric trend graph
- Reamer/Punch/Sewing Awl
- Can Opener (standard & combo tool)
- Screwdriver 3mm (on Can Opener)
- Bottle Opener (standard & combo tool)
- Wire Stripper (x2)
- Screwdriver 6mm (on Bottle Opener)
- Key Ring
- Universal Wrench M3/M4/M5*
- Inline Phillips Screwdriver 1/2
- Magnifying Glass
- Pliers
- Wire Cutter
- Wire Crimper
- Fish Scaler
- Hook Disgorger
- Ruler (cm/inches)
- Multipurpose Hook (x2)
- Small Nail file (on one Multipurpose Hook)
- Large Blade w/Serrated Edge
- Inline Reamer/Punch*
- Wood Saw
- Scissors
- Screwdriver 2.5mm (x2)
- Pruning Blade
- Electrician's Blade
- Wire Scraper
- Pharmaceutical Spatula
- Watch Opener*
- Screwdriver 5mm (on Combo Tool)
- Nail File
- Nail Cleaner
- Metal Saw
- Metal File
- Chisel 4mm
- Large Blade
- Small Blade
- Bit Slotted 3mm*
- Bit Slotted 4mm*
- Bit Torx 6*
- Bit Torx 8*
- Bit Hex 1,2*
- Bit Hex 1,5*
- Bit Hex 2*
- Bit Hex 2,5*
- Bit Slotted 4mm
- Phillips Bit 2
- Phillips Bit 0 (Pozidrive)
- Phillips Bit 1 (Pozidrive)
- Torx Bit 10
- Torx Bit 15
- Hex Bit 4
- Torx Bit 8
- Bit Case (x2)
- 4mm Bitwrench (x2)
- Female Hex drive 5mm for D-SUB Connectors (x2)
- Female Hex Drive 4mm for Bits (x2)
- LED
- Mini Screwdriver
- Corkscrew
Pros:
- The ultimate expression of a Victorinox Swiss Army Knife
- Several tools that are unique to the XAVT in the 91mm range (*)
- A fantastic reference to all the 91mm tools that are available
Cons:
- Not really intended for EDC
- Super-wide width and extra weight make some tools difficult to use
- Very expensive
Bottom line:
The XAVT is an incredible SAK. Victorinox went out of their way to include not only every current tool in the 91mm range, but to even include tools borrowed from different ranges. Some may see it as a monstrosity, but it’s really a superb technical demonstration of what’s possible from Victorinox. I love it.



-
Bonus pic

-
Thank you for the 30 day journey Max! I enjoyed it very much.

-
Great Challenge, Max. Very enjoyable.
-
Well done! Very informative, well written and entertaining.
-
Well you ended it with the best SAK. The biggest and the baddest one. Thank you for making it an enjoyable 30 days!

-
Damm you Max Stone :)
I know I will never compete knowledge-wise with many of our members here on the older models :(
But I really thought I knew the current range pretty well
But once again you have come up with some info I did not know - This time it was the tang stamp on the serrated blade
..... fascinating 
And of course - as always - all the info is presented in a wonderfully informative, engaging, enthusiastic and easily digestible way

One other point worth mentioning - In the original version of the XAVT the Wenger wrench was replaced by an old style (grey surround) mag glass
Wonderful thread - Thanks mate - We've all loved it as it was happening - I also hope lots of people visit it via the stickkie in the months and years to come
-
with folks above: Awesome and informative read. Thanks for putting so much work into this! 
-
@Huntsman said:
Damm you Max Stone :)I know I will never compete knowledge wise-with many of our members here on the older models :(
But I really thought I knew the current range pretty well
But once again you have come up with some info I did not know - This time it was the tang stamp on the serrated blade
..... fascinating 
And of course - as always - all the info is presented in a wonderfully informative, engaging, enthusiastic and easily digestible way

One other point worth mentioning - In the original version of the XAVT the Wenger wrench was replaced by an old style (grey surround) mag glass
Wonderful thread - Thanks mate - We've all loved it as it was happening - I also hope lots of people visit it via the stickkie in the months and years to come
Indeed, this is a great challenge and many thanks to Max for such detail write up each day, I know I am going to miss the daily reading when this is over.

But being optimistic, may I suggest the possible future write up for 58mm, 84mm, 93mm and 111mm...

-
Great finish to your 30 day journey Max!

This thread will provide a great reference source for the members of the forum!

Well done sir!

-
A great thread - sticky-worthy, I think. It was a pleasure to read, Max.
-
@Intorikata said:
A great thread - sticky-worthy, I think. It was a pleasure to read, Max.
-
-
This has been a great information packed journey to follow.
Many thanks for taking the time Max
-
Great thread, Max, I thoroughly enjoyed it and learnt a lot. Thanks again! Time to celebrate!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login