MiniMagLed - Mark II
-
Well, they finally came to Quebec, and I picked one up from walmart. Quality wise, it's okay for the price, but otherwise pretty disappointing.
-color tint is pretty blue
-there is no useful focus ability, as soon as you turn it on it's in focus, but any further turn of head will make the reflector too high and block most of the light from LED.
-output kinda sucks, high is about the same as my fenix L0D's medium.
-about an inch longer than incan minimag
-no lanyard attachment pointBut then again, for $25 I'm not complaining.
-
I'll trade ya. Mine has a reddish/pinkish tint.
-
@jzmtl said:
Well, they finally came to Quebec, and I picked one up from walmart. Quality wise, it's okay for the price, but otherwise pretty disappointing.-color tint is pretty blue
-there is no useful focus ability, as soon as you turn it on it's in focus, but any further turn of head will make the reflector too high and block most of the light from LED.
-output kinda sucks, high is about the same as my fenix L0D's medium.
-about an inch longer than incan minimag
-no lanyard attachment pointBut then again, for $25 I'm not complaining.
Sorry to hear you're not happy with it, jzmtl. I'd take it back and exchange it for another, because you may have gotten a bad one.
Mine has a neutral white output - typical Rebel LED tint - not warm, but not bluish. Of course there is probably something of a tint lottery, but neutral white seems to be what most people have been getting.
Output on high should be around 60 lumens - mine lights up half of my backyard on flood setting.
Sounds like your light may have a misaligned LED/reflector assembly.
When it first switches on it should output a bright flood with a tiny hotspot (and a few artifacts in the beam.)
Continue turning the head another 45 degrees or so. That should direct most of the output into the hotspot, making it wider and a lot brighter. At this point the beam is kind of ringy with a darker area around the hotspot. No good for close up work, but the throw is impressive for a 2AA light.
If your light won't focus to a fairly bright spot, something is messed up and you should exchange it.
.
-
It came in a clam pack so I don't think walmart will be too inclined to take it back as it's not resaleable anymore. I suppose I'm just used to other high powered LED lights, so this seems not as good in comparison. It's definately not 60 lumen in high, as in ceiling bounce it's not as bright as my other light that's known to be 60, probably 40 or so on high. As for focus, mine can be focused into spot, but cannot be defocused for close up work like incan version.
I might go fishing later today if the wind dies down, I'll try it out.
@Black Rose said:
I'll trade ya. Mine has a reddish/pinkish tint.Hehe, with canadapost we might as well buy a new one for cost of postage.
-
@jzmtl said:
It came in a clam pack so I don't think walmart will be too inclined to take it back as it's not resaleable anymore. I suppose I'm just used to other high powered LED lights, so this seems not as good in comparison. It's definately not 60 lumen in high, as in ceiling bounce it's not as bright as my other light that's known to be 60, probably 40 or so on high. As for focus, mine can be focused into spot, but cannot be defocused for close up work like incan version.I might go fishing later today if the wind dies down, I'll try it out.
@Black Rose said:
I'll trade ya. Mine has a reddish/pinkish tint.
Hehe, with canadapost we might as well buy a new one for cost of postage.
Man, I feel kind of bad about recommending this light and then two of you guys buy them and get bad ones. Maybe Mag is sending its factory seconds off to Canada.
This isn't a light I'd recommend anyone to mail order, because the variability of the product seems high. Mag maybe needs to tighten up its manufacturing process a little.
I still think it can be a good buy if you pick one up in a Big Box store near home, then try it out and exchange it if you get one with bad tint, misalinged reflector, etc.
I picked up another at Lowes last week and it's very close in output and tint to my first example. Flood to spot focus works well on both of my examples.
Again, this light isn't for white wall hunters who want a perfect beam.
It's not a light I'd choose for outdoor activities because there are so many superior alternatives for not a whole lot more money.
I do think it'd serve most people well as a toolbox, general utility beater, or automotive light that can be purchased locally for a very reasonable price.
.
-
I can't wait to get the new one. Is it brighter than the first one?
-
@american lockpicker said:
I can't wait to get the new one. Is it brighter than the first one?It's definitely brighter than my first generation 2AA MMLED, which is about 40 lumens on fresh cells IIRC.
The first gen 3AA MMLED is around 55 lumens on fresh cells, IIRC but I no longer have one around to compare.
The 3AA is probably about the same output as the 2nd gen 2AA, working from memory.
Again, the 2nd gen 2AA lights don't offer tremendous output, being maybe 60 lumens (guesstimated by comparing to my other lights.)
They are more efficient than the 1st gen lights in terms of longer runtime.
They have a low setting which is useful for closeup work inside enclosures, computer cases, etc.
They have strobe and SOS settings which could be useful for emergencies, which is why I think they'd make good automotive lights.
.
-
@ringzero said:
Man, I feel kind of bad about recommending this light and then two of you guys buy them and get bad ones. Maybe Mag is sending its factory seconds off to Canada.This isn't a light I'd recommend anyone to mail order, because the variability of the product seems high. Mag maybe needs to tighten up its manufacturing process a little.
No worries, it's the nature of LED product, mag obviously doesn't want to pay for premium color bin, so they probably just said give us whatever you got.
-
@american lockpicker said:
Terralux has an LED upgrade for 2AAA.
Where can I find this 2AAA upgrade, AL?
Bright guy carries it. http://www.brightguy.com/products/Universal_LED_Lighting_Kit_(TLE-20).php
-
Lighthound have them as well: http://www.lighthound.com/Terralux-TLE-20-Universal-LED-Lighting-Kit_p_2149.html
Here are my thoughts on it from another thread;
Well I got the TLE-20 and I am reasonably happy with it. It certainly is an improvement over the old bulb. It looks like it is kicking out light somewhere between the low (11 lumen's) and the medium (30 lumen's) on my L0D Q4, so lets say about the 15-20 lumen's mark (that is a pure guess though). The colour has a very nice slightly warm white feel to it without any hit of blue that I can see, and that may be it's best feature. If you want to bring back an old friend (as I wanted to) then this is fine, but I wouldn't suggest you go buy a 2AAA mini-maglite and the TLE-20 just to end up with this torch.
-
I've been using it around the house, and it doesn't seem so blue anymore unless I compare with another light side by side. Then again I was using a princeton tec tec40 around the house before so that altered my color perception.
-
@ringzero said:
Man, I feel kind of bad about recommending this light and then two of you guys buy them and get bad ones. Maybe Mag is sending its factory seconds off to Canada.It's the old Lux lottery in a new package.
I only paid $19 for the revised minimag, so I really can't complain. When not white wall hunting it works fine.
-
Correction to my first assessment, the output of rebel minimag is probably around 50 or so lumens.
-
Just want to mention, the module between 2AA and 2D rebel mag is fully interchangeable. I swapped a 2D module into my 2AA and like it much better. Higher output and one mode, with diffuser film it's perfect as around house light. However you need rechargeable for this setup, the 2D module draws 1 amp from battery and alkaline won't last under that much pressure.
-
@jzmtl said:
Just want to mention, the module between 2AA and 2D rebel mag is fully interchangeable. I swapped a 2D module into my 2AA and like it much better. Higher output and one mode, with diffuser film it's perfect as around house light. However you need rechargeable for this setup, the 2D module draws 1 amp from battery and alkaline won't last under that much pressure.Thanks for the great tip, jzmtl. Can you estimate the output in lumens for a MiniMagLED 2AA modded with the 2D Rebel module?
My MiniMagRebelLED 2AA has been getting fairly decent runtimes using NiMH cells. I've used it a lot around the house and for walking up to the corner store each night and have no complaints with it so far. Another one loaded with lithium cells stays in the car.
Another neat feature of the 2AA MMRebelLED is candle mode, which is also quite nice for close up stuff, like reading.
I've been intending to pick up a Mag 2D Rebel ever since I first read about them over on CPF, but every time I've been in lately the local Lowes has been out.
A 2D Mag modded with a High/Low/Strobe/SOS module from a 2AA sounds decent too. Runtime on Low driven with 2D cells should be fantastic for blackout duty. Also, I'd rather change levels with a momentary forward clicky than with a twisty head.
.
-
Rough estimate it's about 80 lumen. The 2AA module takes 400 mA on high and 100 mA on low, will last days of contant on with D cell (about 15000mAh at 100mA draw).
-
@jzmtl said:
Rough estimate it's about 80 lumen. The 2AA module takes 400 mA on high and 100 mA on low, will last days of contant on with D cell (about 15000mAh at 100mA draw).Thanks jzmtl.
80 lumens is decent for a 2AA utility light.
Have you measured current draw with the 2D module?
I don't have a light meter, but I've done some tests by eyeball and runtime is fairly decent with 2500 mAH NiMH:
-4 hours bright output, looks fairly constant
-followed by 2 hours gradual decline to the equivalent of Low level output
-followed by 2 hours gradual decline to just a few lumens, at which point I stopped the test.So, I'd estimate:
4+ hr to 50%
6+ hr to 25%
10+ hr to 5%Not in the same league as Fenix for efficiency, but not too shabby for a $20 hardware store light!
I haven't done runtimes for Low level output yet, because it'd probably have to run for well over a full day.
For people wanting a decent toolbox, automotive, or utility light for use around the house this light fills the bill.
You can pick up a MiniMag 2AA Rebel LED, then add some NiMH cells complete with trickle charger for a total of less than $30! After that initial $30 outlay, running the light is basically free.
This light is all that most people would need for around the house. It'd be a huge step up from the plastic 2D incans most people rely on around the house.
.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login