Leatherman Free P2/P4 Club and Feedback Thread
-
@bigraab1972 said:
https://youtu.be/RrU_kSBGWFcThis guy makes 4mm bit drivers for the free
Sent from my iPhone using Tapatalk
After adding the processing charges+shipping+tax, it comes up to almost $40 ::)..But I guess if you really need a 4mm driver and willing to spend the extra money and provide your own bits, it will be a good deal

-
Leatherman Germany was pretty fast, yesterday ordered, today surprisingly on my Desk..
I think I put in on my Belt, ..
Makes a pretty good impression so far, I have to practice a bit whit this one hand mechanism,
The Pliers are pretty easy to open whit one hand, but I can’t close it whit one hand.. pix will follow..Gesendet von iPhone mit Tapatalk Pro






-
Anybody have any ideas? So I’ve had mine for a few months. It was like this when I got it. If you squeeze the pliers too tight the pliers head pivot binds. The more force you apply the tighter it gets, it’s very easy for it to bind so tight that the handle locks will disengage before the pivot turns. I thought at first it just needed some break in time. I would bind the pivot as tight as needed to still be able to work the pliers without releasing the handle locks. I used acetone spray to clean the pivot out then proceeded to work the pliers open/close about 500 times a day, depending on free time at work. After each session I would rinse the pivot and lube with a Teflon based oil. I never witnessed any metal shavings around the pivot area so I don’t know if I was actually removing any material. It’s become such a pain in the a$$ to have to splay the handles against each other every time I use the pliers. The smallest force will cause them to bind Such as cutting 12awg automotive wire. Any tips? Or should I send it back? I’ve heard of guys having the same problem with their replacement p4. Thanks
Sent from my iPhone using Tapatalk
-
I had the same, and also Gearbltm.
What i found and G confirmed, if you use the blunt wire cutter from the back of the pivot, to excert some pressure there, you'll be able to loosen the pliers to what it used to br. I have no explanation on why this happens, makes no logic on a round pivot -
@Raoul Octav said:
I had the same, and also Gearbltm.
What i found and G confirmed, if you use the blunt wire cutter from the back of the pivot, to excert some pressure there, you'll be able to loosen the pliers to what it used to br. I have no explanation on why this happens, makes no logic on a round pivotRight now to loosen the pivot I push the handles in opposite directions perpendicular to the pivot. Are you referring to the hard wire cutter side or the crimper side of the pivot area? And how do you exert pressure there? Thanks for the reply!
Sent from my iPhone using Tapatalk
-
Pliers deployed, use something wood or soft metal, and on the back of the pliers(where the handles start) you have a crimper hard wires cutting something. Put that wood or metal there and squezze the handles
-
Noted. Thank you!
Sent from my iPhone using Tapatalk
-
Well I treated myself and now have a P4 on the way :)
Sent from my iPhone using Tapatalk
-
Nice ones matzesu and Monrogue

-
Conrgats. -
@matzesu said:
Leatherman Germany was pretty fast, yesterday ordered, today surprisingly on my Desk..
I think I put in on my Belt, ..
Makes a pretty good impression so far, I have to practice a bit whit this one hand mechanism,
The Pliers are pretty easy to open whit one hand, but I can’t close it whit one hand.. pix will follow..Gesendet von iPhone mit Tapatalk Pro






Great photos! Maybe it will close after you get the hang of doing it. One of those practice makes perfect thing.

-
@Monrogue said:
Well I treated myself and now have a P4 on the way :)Sent from my iPhone using Tapatalk
Great choice buddy
.I really like my P4 (the fact that I bought a second one as backup for the collection speaks for itself, right?).
I've been using it as my EDC tool since April, and it handled everything I threw at it. I admit that I'm not a heavy user, but still...
The Free had a rough start when it was released, but despite the negativity, it's a good tool. If I was a heavy user I would probably prefer a Wave or Charge (and the Surge of I was an insane heavy user ;)). But for my needs, the Free is more than capable enough.
Anyway, you know we expect pics when your P4 arrives, right?

-
@Top-Gear-24 said:
Great choice buddy
.I really like my P4 (the fact that I bought a second one as backup for the collection speaks for itself, right?).
I've been using it as my EDC tool since April, and it handled everything I threw at it. I admit that I'm not a heavy user, but still...
The Free had a rough start when it was released, but despite the negativity, it's a good tool. If I was a heavy user I would probably prefer a Wave or Charge (and the Surge of I was an insane heavy user ;)). But for my needs, the Free is more than capable enough.
Anyway, you know we expect pics when your P4 arrives, right?

What, you getting a backup of a tool? Never heard of such a thing ::)
I’m far from a heavy user myself, and most days hardly use my MT beyond the knife, but my P2 has been good for anything I’ve needed so far, and easy access to everything is great. Really the P2 is sufficient, but I couldn’t resist having some extra fiddle factor the P4 provides ;)
Of course I will post some pics.....
-
Ok just arrived. As I expected, I like it just as much as my P2 :). I’m curious though, why the serrated blade’s opening doesn’t stick out past the handle like the plain blade. Maybe to show one as the “main” blade? It would look a little better if both blades were flush with the handle edge. Also the chisel tip of the serrated is more rounded at the very top of the blade. Not sure if that’s the norm, but no big deal anyway.




Sent from my iPhone using Tapatalk
-
Nice one Monrogue

-
@Monrogue said:
Ok just arrived. As I expected, I like it just as much as my P2 :). I’m curious though, why the serrated blade’s opening doesn’t stick out past the handle like the plain blade. Maybe to show one as the “main” blade? It would look a little better if both blades were flush with the handle edge. Also the chisel tip of the serrated is more rounded at the very top of the blade. Not sure if that’s the norm, but no big deal anyway.




Sent from my iPhone using Tapatalk
I like that you can access the tools without having to open the whole thing! Checked them out at Dicks Sporting store but all the MT’s are locked up and no one was around to help so I left without handling one!

-
Thanks guys, and bummer rapidray. I don’t have anywhere like that close to me, so I can’t check any out in hand before buying.
-
That was a shame Rapidray >:(
-
It was for sure. I have been on the other LM threads following and learning about the different ones. My son is more into the LM as they are his favorite.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
