Bedside flashlight?
-
Great lights in this thread!

Been carrying a JetBeam TC-R1 since 2012. A while back I added a 'glocator' to it's lanyard recess. Simple industrial , glow in the dark , egress tape that has been punched to fit. Waterproof and lasts easily over 12 hours for night adapted eyes. Easy peasy to locate on the stand in the wee hours.
-
Nicely done with the GID tape.
-
That does look great! Thank you for a very cool and applicable idea for bedside flashlights!
-
@comis said:
That does look great! Thank you for a very cool and applicable idea for bedside flashlights!Thanks, I really like tritium, but I seem to eventually break them all :(
With this, it's just some hollow punches and voila.
Glo-nation sold the good stuff, by the foot, but it seems they have closed up shop. -
Fenix TK12.
There is no memory mode on this light, it always comes on in high mode.
-
@Archibald Tuttle said:
Thanks, I really like tritium, but I seem to eventually break them all :(
With this, it's just some hollow punches and voila.
Glo-nation sold the good stuff, by the foot, but it seems they have closed up shop.Hope to find it else where when needed...
@Millhouse said:
Fenix TK12.There is no memory mode on this light, it always comes on in high mode.
I thought they have dual stage adjusted by the twist of head, so you could choose to low output by default? Or you'd prefer to keep a bright light by the bedside?
-
The TK12 interface is always high mode, regardless of whether it is momentary on or fully on.
The light does have low and medium mode. These are accessed when light is fully on, then a half press of the tailcap. As soon as light is turned off, it is back to high mode.
-
@Millhouse said:
The TK12 interface is always high mode, regardless of whether it is momentary on or fully on.The light does have low and medium mode. These are accessed when light is fully on, then a half press of the tailcap. As soon as light is turned off, it is back to high mode.
Oh, I see. I used to own Fenix lights that has mechanical dual stages, where the brightness is altered by twist of front bezel. I thought Tk12 was the same when reading about it online, sounds like it is changed by tailcap switch programming.
-
I bought a Nitecore TUP from Blitzwing and absolutely love this light. It pretty much fits the bill for every purpose.
-
@spudley112 said:
I bought a Nitecore TUP from Blitzwing and absolutely love this light. It pretty much fits the bill for every purpose.The TUP is way too bright for me on the lowest setting which is why mine is not by the bed anymore.
The light is truly amazing though for sure but I need lower lows.
-
@spudley112 said:
I bought a Nitecore TUP from Blitzwing and absolutely love this light. It pretty much fits the bill for every purpose.A blockish light is cool, at least it won't roll around the bedside table. I wish Nitecore or Jetbeam could come up something with rotary dial and the smart display to tell you how much remaining time, that'd be ultra useful and nice to use.
-
@ezdog said:
The TUP is way too bright for me on the lowest setting which is why mine is not by the bed anymore.The light is truly amazing though for sure but I need lower lows.
Ez, if you get a chance, do check out the review on the Jetbeam RRT01(2019), it has infinite steps and the lowest is so low that your eyes can hardly see.
-
@comis said:
Ez, if you get a chance, do check out the review on the Jetbeam RRT01(2019), it has infinite steps and the lowest is so low that your eyes can hardly see.Thanks
I have had them but also need a switch on my lights for positive off and not having to spin the wheel for light.I already have plenty of lights that go that low too and had hoped that the TUP would even though I had no reason to hope so,no Nitecore that I have known will except theirs with the dial which are discontinued and were too big for what they are and the last thing I needed is the flashing colors too..
The T1A that is by my bed already goes as low as the Jetbeam and also has no switch so I am good with that and every ZL that I have easily also goes that low if I want to.
The Tiny Manker E02 actually has 22 moonlight levels that are easily selected from and I use that by the bed a lot too,it is easier than most to handle at night when I might need to too!

-
Those are some good light, I myself am a big fan for twisty, so less thing to fail, and a short light with tailstand capacity is a bonus for me, so I don't have to turn on the bathroom light to wake myself up.
-
Amici,
Being a flashaholic, I recently starting collecting flashlights manufactured during the 1960's-1970's. Here is one of my favorites that I slightly modded. It is a Sportsman made by Rayovac sometime in the 1970's. What I did was ditch the incandescent bulb, and replace it with an LED. It escapes me how many lumens I installed, but I believe it is 200 lumens which is definitely a step up from the traditional bulb.Especially since the original reflector is nearly 100% mint considering it's age. I also replaced the factory plastic lens with a more traditional glass type. For power, I am running 6 AA lithium batteries contained within SANYO ENELOOP Spacer/converters with great results. It feels great in the hand, plus it's cool using something that was made and considered top notch equipment in the 1970's.
Cheers,
Serge



-
@sergemaster said:
Amici,
Being a flashaholic, I recently starting collecting flashlights manufactured during the 1960's-1970's. Here is one of my favorites that I slightly modded. It is a Sportsman made by Rayovac sometime in the 1970's. What I did was ditch the incandescent bulb, and replace it with an LED. It escapes me how many lumens I installed, but I believe it is 200 lumens which is definitely a step up from the traditional bulb.Especially since the original reflector is nearly 100% mint considering it's age. I also replaced the factory plastic lens with a more traditional glass type. For power, I am running 6 AA lithium batteries contained within SANYO ENELOOP Spacer/converters with great results. It feels great in the hand, plus it's cool using something that was made and considered top notch equipment in the 1970's.
Cheers,
SergeI did a similar mod more than a decade ago, but back then, we didn't have strong leds we do nowadays. But it was really a refreshing mod to breathe new life into old flashlight!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

