Next Naked Project
-
Thank you jph_777

I’ve worked though the minor issues I picked up from the prototypes, so limited production has started. Above is first ready for a customer, Naked #1. It will have an identical twin, Naked #2
-
Looks great, Max!
-
Thank you Myron

-
Very cool job.
-
Thanks 🆘

-
This looks great, Max!
-
Thanks comis

-
Still waiting for the naked part...

-
We have to keep it family friendly pfrsantos
:D -
Would this qualify?


-
Looking good Max

-
Nice

-
And then there were two...


-
Very nice Max excellent work

-
Thank you Wim.

And on the peening. The trick is to start with a domed shape on the pin, and to have a small countersink in the scale. Then just careful, repetitive taps with a good quality light jewelry peening hammer. Must be mirror smooth on the face.
I start with the flatter side to swell the head and lock it into the hole. Regular inspections under a magnifying ring light to check I’m even all around. Once I can see the head has locked (no more gap around the pin/hole interface), I switch to the ball side and focus on rounding the edges.
The trick is go far enough to the edge to get it curved, but not too far that you strike the scale. The odd small tap does wander, but these miss hits are very difficult to see.
The pic below shows the amount of exposed rod I use to peen closed, about 1.2mm. I then remove the rod and shape/sand it to a dome to peen. Rod must be a good fit in the scale, no wobble, or you’ll need to peen a bigger head.
Next pic shows the pins ready before peening one side. Last pic is peened head (done in a vice, sandwiched in hardboard), inserted into bottom scale before assembly of SAK.
This has all been trial and error. But I’m happy with the results.



-
Excellent thanks for the explanation Max

-
BTW Wim...what’s with the bananas replacing the nuts?


-
I am no longer nuts I am now just bananas :D
I made 60K posts yesterday
-
That’s now really something to celebrate Wim!

What comes after bananas?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login