30-day axe challenge
-
@TazzieRob said:
Day 1I had this piece of Tas Oak and thought I might be able to make a shorter handle, but it is split too much inside to finish off.
Another option will be sourcedSent from my SM-G970F using Tapatalk
Great start!

Idea: if you had a second axe...you could shorten the handle on the first one.....


-
I like your idea of having a long handle and a short handle for increased versatility.

-
@TazzieRob said:
Day 1I had this piece of Tas Oak and thought I might be able to make a shorter handle, but it is split too much inside to finish off.
Another option will be sourcedSent from my SM-G970F using Tapatalk

-
Day 1
Chip Chop No1 reporting for duty

Thank you to Sparky415's generosity, this will always remain one of my favorite tools and always put a smile on my whenever I see it. It's been a while since the last use, thinking I should sharpen it a bit to make it shaving sharp. Not entirely sure it was a little bit of surface rust, maybe I should clean it up a bit with really fine steel wool...


-
Made a little more progress on the handle for Lyndax. I think I'm happy with where it is now, a little longer than one of my tomahawk handles, and a tad longer than my Council small axe handle. Feels great with one hand and 'alright' with two. I'm leaving it as is today and will revisit it tomorrow. May end up lengthening it a touch, but sometimes "better is the enemy of good." So, I'm sleeping on it. :D

Since the challenge starts tomorrow, I'll need to finish the handle and get Lyndax sharp, too. This is going to be fun!
It's looking great from where I stand, good job!

-
@TazzieRob said:
Day 1I had this piece of Tas Oak and thought I might be able to make a shorter handle, but it is split too much inside to finish off.
Another option will be sourcedSent from my SM-G970F using Tapatalk
Always enjoy watching people DIY their tools to perfection. -
That is a cool axe, comis!

-
I did make a pvc mask for Bruce, though
Sent from my SM-G970F using Tapatalk


-
Fuzzaxe Day 1
Excellent start fellas - this really is going to be an interesting and highly enjoyable challenge... It's going to be great!

Fuzzaxe is rather inconveniently 600-odd miles away and I can't get to him until the start of next week. So as a stopgap, I've dug out my Bahco hatchet, one of two that I have, but this one lives with me down south (the other up north).
It's an excellent cheap-ish very German looking small axe and all round good choppa... my only criticism is that the steel's a bit soft. As you can see, it could do with a bit of a clean and touch-up on the edge there... Someone must have put it away without making good...

For the purposes of this challenge, I shall name him Fakaxe!

-
@Fuzzbucket said:
Fuzzaxe Day 1Excellent start fellas - this really is going to be an interesting and highly enjoyable challenge... It's going to be great!

Fuzzaxe is rather inconveniently 600-odd miles away and I can't get to him until the start of next week. So as a stopgap, I've dug out my Bahco hatchet, one of two that I have, but this one lives with me down south (the other up north).
It's an excellent cheap-ish very German looking small axe and all round good choppa... my only criticism is that the steel's a bit soft. As you can see, it could do with a bit of a clean and touch-up on the edge there... Someone must have put it away without making good...

For the purposes of this challenge, I shall name him Fakaxe!

Fakaxe?

-
After the dryness of last summer, I have had several eucalyptus trees die on me. This one is close to the fence so thought I'd kick off the challenge with a bang and take it down, with Bruce, of possible. I used him to lop off the branch on the left, then proceeded to make a face cut. Bruce is very easy to swing with his long handle and light head, but is very jarring in this hard dry wood. Once I got to this point, and despite Bruce cutting well, I didn't think id be able to fell it before dark, so I grabbed the Hickory handled 4.5lb Hytest and finished it off. Bruce watch on from the fence and will come back into force limbing the tree. Despite the amount of chopping Bruce has done in hard dry wood, I haven't sharpened him since stubbing his toe those months back
Sent from my SM-G970F using Tapatalk




-
Day 1
Its always good to have a healthy start to any challange...
Then again I am still in yesterday so this banana isnt for me, its going in the wife's lunch. I on the other hand am cracking open another Cherry Coke and nukeing some 6am pizza.(Edit, didnt like the wording)

-
Great start to day one guys

-
Day 1 photos
Morning shots and hopefully bonus of some use later today.


-
Looks a cool axe Rapidray

-
-
Nice one styx

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
