Caspian Pocketsmith
-
I noticed these have been mentioned a few times before, and I see there is one listed in our ad service right now- does anyone (besides Bob :P ) have one of these, and if so, what do you think of it?
I don't have a 1911 at the moment to tear apart, and no plans to get one anytime soon (looking for a Glock 20) and I was wondering if it's a specific tool for the 1911, or whether it has any decent general use type functions. Also, wondering about the quality or lack thereof.
Def
-
I found this review here: http://www.thefiringline.com/forums/showthread.php?t=238100
*The CASPIAN POCKETSMITH
You should have seen the ads for them in many of the gunrags by now; a multi-tool for the 1911. The handles are plastic or rubber coated. Enough to make them nonslipping when one's hands are wet. The pliers part of the tool is a bushing wrench with a short pliers section and a wire cutter. Encased in the handles are:
- Clip point knife blade
- two different size hex or Allen wrenchs
- small screwdriver
- file with two different "cuts"
- two larger flat screwdriver blades
- pin punch
The two hex wrenches fit the various set screws that are used on many sights and the grip screws. The flat blades fit the magazine catch lock, regular grip screws and what ever else that may need a flat bladed screw driver. The pin punch fits both the mainspring housing retaining pin and the firing pin.
The tool is made out of stainless steel and should hold up for a long time.
The pliers/muzzle bushing wrench takes some practice to use and seems to be a bit of a pain in the azz. One almost needs three hands to get it to work. It would be nice if the knife blade was made out of high carbon steel and not stainless, at least I can get a better edge on a high carbon blade than I can with a stainless blade. I likethe tool, I have used it for detail stripping a couple of my pistols. I would not get rid of it but I don't think I would have bought it, mine was a Christmas gift.*
Of course, being a gun forum, the review is written by a gun guy. Nothing wrong with that, but I'd like to know if it's a specialized type tool. It looks like it would have some general purpose use though, judging by the tool selection. Of course, that also depends on how well the pliers work as regular pliers.
At ~$30 it looks like it might be an interesting piece for the collection!
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login