SAK choice advice?
-
@FolderBeholder said:
I absolutely love Swiss Army Knives...so much so, that it would be hard to pick just one to suggest, BUT, I can recommend these Knipex pliers.
They are amazing for their small size.
https://www.amazon.com/KNIPEX-87-01-125-Pliers/dp/B005EXOKKE/ref=sxin_1_sxwds-bia-wc1_0?crid=2QAX2UVQXLNCR&keywords=knipex+pliers&pd_rd_i=B005EXOKKE&pd_rd_r=133e274e-d457-4f45-bbae-ade362a9ab41&pd_rd_w=LhV2u&pd_rd_wg=kCvEG&pf_rd_p=39e7c2a0-69e1-4a3f-8d8f-4c4ee1aefdb5&pf_rd_r=S6193745KDX5KD1VVG2Q&psc=1&qid=1570476252&sprefix=knipex%2Caps%2C195You just can't go wrong with Knipex pliers IMO. For a small general-use pair the 145mm needle-nose combination pliers are hard to beat.
-
Its threads like these that I end up rethink all my SAK choices :ahhh

Like Folderbeholder I love SAKs and I have a hard time deciding what I'll carry
.That being said, the Mountaineeer is a great looking SAK and If you wanted the saw layer the Ranger which I have is splendid. As far as pliers I think they ^^ have you covered.
-
The small cobra knipex pliers really are good. Here is a size comparison with Pioneer-X

Very pocketable

-
That set up is awesome

-
I've always thought of the Cybertool L as perhaps the ultimate office/building/urban SAK. I think this would allow you to ditch the separate bit holder and bits. Optionally, throw in (1) a small pair of Channellocks or the aforementioned Knipex pliers if you want pliers that can handle a bit more than the 91mm SAK pliers, and (2) a small flashlight if you don't already carry one, and you're good to go.
-
@BePrepared said:
The small cobra knipex pliers really are good. Here is a size comparison with Pioneer-X
Very pocketable

Nice setup!

-
Another vote for knipex pilers which can be nested with a SAK Mountaineer. Personally, I live in a big city, and I love my Mountaineer which is a perfect compromise on urban and rural use.
-
That's a cute parrot :D
-
@BePrepared said:
The small cobra knipex pliers really are good. Here is a size comparison with Pioneer-X
Very pocketable

What screwdriver is that?

-
@nate j said:
I've always thought of the Cybertool L as perhaps the ultimate office/building/urban SAK. I think this would allow you to ditch the separate bit holder and bits. Optionally, throw in (1) a small pair of Channellocks or the aforementioned Knipex pliers if you want pliers that can handle a bit more than the 91mm SAK pliers, and (2) a small flashlight if you don't already carry one, and you're good to go.
+1 for the Cybertool L (a.k.a. CT 41) . I have one sitting in my ubiquitous odds and ends drawer in my kitchen and it covers most of my needs around the interior of the house. The bit driver is indispensable for opening the battery compartments of my son's toys and various other electronics, and it has a longer reach than the inline Phillips on say the SwissChamp. You can also buy the bit set for the SwissChamp XXLT to bring your total to 8 double-sided bits. You'll have the very capable wood saw and the file on board, as well as the reamer you mentioned. I'd take this one over the SwissChamp mainly because of the bit driver. -
Thanks for the suggestions. :)I guess lots of folks go through this compromise of not having the exact tool set. Today I made a list of all the tools and ranked them 0-3 (Never use, seldom, often, always) In poll position is the Ranger as I think I could make use of the chisel, but could happily lose the scissors and corkscrew.
If I went down the bit holder route...
How strong is the bit holder?
Could you assemble furniture with it?
What is the corkscrew obsession all about?

-
@fullbreakfast said:
I would love to know where these extra bits can be bought, do you have a source?Thanks!
I've seen them available on ebay both separately and in a set of four.
@Rathbone said:
Thanks for the suggestions. :)I guess lots of folks go through this compromise of not having the exact tool set. Today I made a list of all the tools and ranked them 0-3 (Never use, seldom, often, always) In poll position is the Ranger as I think I could make use of the chisel, but could happily lose the scissors and corkscrew.If I went down the bit holder route...
How strong is the bit holder?
Could you assemble furniture with it?
What is the corkscrew obsession all about?

Don't underestimate those scissors! They are some of the best around. The bit holder is pretty decent, but like any of the tools, you don't want to put an excessive amount of torque on it. I've used mine to help put together a cabinet that fits over the toilet tank and a toddler bed and a twin sized bed.
And the corkscrew is great for untying knots in shoe/boot laces and holding the mini screwdriver. I hear it does wonders on wines that still use corks as well.
-
@Rathbone said:
If I went down the bit holder route...How strong is the bit holder?
Could you assemble furniture with it?
It's strong enough for most household jobs I think. There is a 4mm hex bit included that is the most commonly used Ikea size, and I used my Cybertool to assemble various bits of Ikea furniture with it - way better experience than with the crappy Allen key that comes in the pack. Not as good as my Wera Zyklop ratchet set that I use for such jobs now, but that is not nearly so portable.
-
@ReamerPunch said:
What screwdriver is that?
The screwdriver I posted a pic of is a CountyComm Deluxe Technician's Pocket Screw Driver. It has a magentic in one cap, and both bits are reversible: 2 Slotted: 1/16" and 1/8"; and two 2 Phillips: #P0 - #P00. The bits are an unusual size and regular 1/4" or 4mm bits will not fit. You can also buy it with a plastic body (lighter weight, or a 'cheap' way to get spare bits).
-
@fullbreakfast said:
If you are ever caught outside in a Force 10 gale and in danger of being blown clean off the face of the Earth you whip out your SAK, screw the corkscrew into the nearest sturdy tree then hang onto that SAK for dear life!
I wonder if someone ever tried that 
-
@Rathbone said:
If I went down the bit holder route...How strong is the bit holder?
Could you assemble furniture with it?
It is quite solid, and of typical Victorinox quality. I don't think assembling furniture would be a problem.
Corkscrews have a number of handy uses besides opening wine bottles. Additionally, I find it makes a great little marlin spike for working knots, and of course it holds the excellent mini-screwdriver. If you're looking for even more corkscrew uses, there are plenty of threads about it:
/topic/82581
/topic/40053
/topic/70339
Also worth noting is that the backspring Phillips driver is somewhat redundant on SAKs that include the can opener/screwdriver tool (this generally does very well with any common Phillips screws that aren't too deeply recessed), and very much redundant on SAKs that have the end-mounted Phillips or bit driver.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
