Modding alox minichamp into alox rambler
-
Very nice mod. I want to make an Alox Vagabond with parts from a MiniChamp, but haven't mustered up the nerve yet.
-
It’s been a bit over a year now, so I figured I’d give an update on how the mod is holding up.
So far there has been no loosening off the tools and everything is working great! I notice that the heads of the rivits have become more smooth over time, the peening marks becoming less obvious. Makes me wonder if Vic uses something a bit harder than brass in their pins, as I’ve never noticed it on a factory knife.

-
Beautiful! And happy just over 1st anniversary

-
Thanks, mags!
-
Nice one gustophersmob

-
Thanks, Wim!
-
Looks good!

@gustophersmob said:
Makes me wonder if Vic uses something a bit harder than brass in their pins, as I’ve never noticed it on a factory knife.The use nickel silver pins on the alox knives, which is harder than brass.
-
Thanks

And thanks for the info on the pins. I knew they used nickel silver for the 93mm line, but didn’t realize they used it on other alox sizes.
-
Great job, love me some Alox Rambler, the best 58mm, too bad it is not officially available (only seriously overpriced).
I found out that the easiest way to do it, is to place the Minichamp on soft wood, then rather than drill, push the pins out into the wood (with a pointy center punch).
This has 2 major benefits:- no damage to the scales if you are careless with the drill
- You then can remove the top scales and layer by layer (the wood and the bottom-scale holds everything in place) with ease.
-
@Etherealicer said:
Great job, love me some Alox Rambler, the best 58mm, too bad it is not officially available (only seriously overpriced).I found out that the easiest way to do it, is to place the Minichamp on soft wood, then rather than drill, push the pins out into the wood (with a pointy center punch).
This has 2 major benefits:- no damage to the scales if you are careless with the drill
- You then can remove the top scales and layer by layer (the wood and the bottom-scale holds everything in place) with ease.
Thanks

That’s a good idea that I may try next time. My 1/16” punch isn’t pointy, so it may not work. I’m also surprised the nickel silver pins don’t deform the alox being driven through them. Depending on the aluminum alloy they use, the pins may be harder than the scales

-
@gustophersmob said:
Thanks
That’s a good idea that I may try next time. My 1/16” punch isn’t pointy, so it may not work. I’m also surprised the nickel silver pins don’t deform the alox being driven through them. Depending on the aluminum alloy they use, the pins may be harder than the scales

I found out by accident... wanted to mark the center for drilling... and swooosh, pins were out.
Tested it on other models, but it only works with 58mm alox.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

