30-day axe challenge
-
day 17: chopped some boxes
<a href="https://flic.kr/p/2hweYiM" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/48912621583_16061f66c8_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@styx said:
day 17: chopped some boxes<a href="https://flic.kr/p/2hweYiM" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/48912621583_16061f66c8_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Great job for a axe styx

-
@Fuzzbucket said:
**Fuzzaxe Day 17 **Right... I know I said I was going to experiment a bit using solely the axehead as a woodworking tool. Well... I didn't, I did something else instead.
The veg patch up here was starting to get quite badly overshadowed by trees, an ash and sycamore in particular, and I'm pretty sure it's impacted detrimentally on the quality of veg this year. So, I decided to remove the boughs that were the worst offenders and open it up a bit whilst hopefully not spoiling the trees too much.
Now to do this I just removed limbs in sections using a 12' pole saw, being careful not to hospitalise myself in the process, and it was an easy enough job. But now I've got about a dozen or so bough sections the size of a small tree that need to be chopped up, sorted and stored on the stick pile for next year's winter. What would be an ideal tool to do this?... FUZZAXE!!! :ahhh... runs off like a small ungainly child to fetch it...
I fitted the longer handle to Fuzzaxe for the job so I could get a really good snap to my blows and he worked SPLENDIDLY breaking them down. It was a hugely enjoyable and satisfying process cleanly severing inch thick limbs with a single glance of the axe.
Anyway, the pics...




Still time, Fuzzy

Great chopping job, anyways

-
Day 17:
No use today, but I found another project axe I have lying around

Now I just need a couple of handles and give them a new edge.
Would the bigger one work with a straight sledgehammer handle? Any thoughts would be much aprecciated
And the smaller one I might get a handle that is too big and shape it to fit [emoji848]
Sent fra min FRD-L09 via Tapatalk
-
Day 17
Who needs a Stihl chainsaw when you have a mini axe? :D
-
Great pics guys

-
Great job cleaning up those axes, Borg! Excellent work.
Nice clean cuts there, Fuzzy. Something wonderfully satisfying about limbing trees, branches, and zombies. Nice work!

-
Day: 17
Messed about in the garden until the rain started. No uses for Lyndax, but nice to have her slid under the belt....just in case.... ;)

-
Messed about in the garden until the rain started. No uses for Lyndax, but nice to have her slid under the belt....just in case.... ;)

No use? Surely you can fine ONE branch to
hoechop into?Actually, where is your balance point on Lyndax? Bruce's was maybe 20cm/8" back on the longer handle, now maybe 10cm/4" with the shorter handle. I'd think with the heavier head, yours would have a closer balance point with the same length handle than mine
-
Day 18
On my new handle, I'm going to have to watch very carefully when I get to the meaty end, I was trying to correct the alignment of the edge to the end of the handle, but didn't notice I'd rotated slightly one way.
Another of my dead trees after last summer. I was able to push this one over after Bruce took some limbs off
Sent from my SM-G970F using Tapatalk


-
@Fuzzbucket said:
**Fuzzaxe Day 17 **Right... I know I said I was going to experiment a bit using solely the axehead as a woodworking tool. Well... I didn't, I did something else instead.
The veg patch up here was starting to get quite badly overshadowed by trees, an ash and sycamore in particular, and I'm pretty sure it's impacted detrimentally on the quality of veg this year. So, I decided to remove the boughs that were the worst offenders and open it up a bit whilst hopefully not spoiling the trees too much.
Now to do this I just removed limbs in sections using a 12' pole saw, being careful not to hospitalise myself in the process, and it was an easy enough job. But now I've got about a dozen or so bough sections the size of a small tree that need to be chopped up, sorted and stored on the stick pile for next year's winter. What would be an ideal tool to do this?... FUZZAXE!!! :ahhh... runs off like a small ungainly child to fetch it...
Nice chopping day! Well done

-
@styx said:
day 17: chopped some boxes<a href="https://flic.kr/p/2hweYiM" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/48912621583_16061f66c8_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Nice usage...I will be doing that very shortly as recycling trash gets picked up tomorrow!

-
No use today, but I found another project axe I have lying around

Now I just need a couple of handles and give them a new edge.
Would the bigger one work with a straight sledgehammer handle? Any thoughts would be much aprecciated
And the smaller one I might get a handle that is too big and shape it to fit [emoji848]
Sent fra min FRD-L09 via Tapatalk
Nice - I’m already looking forward to seeing the new wood on them!

-
@TazzieRob said:
Day 18On my new handle, I'm going to have to watch very carefully when I get to the meaty end, I was trying to correct the alignment of the edge to the end of the handle, but didn't notice I'd rotated slightly one way.
Another of my dead trees after last summer. I was able to push this one over after Bruce took some limbs off
Sent from my SM-G970F using Tapatalk
Excellent usage!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
