30-day axe challenge
-
@Fuzzbucket said:
**Fuzzaxe Day 18 **Not much happening today. However, these saddler's rivets arrived in the post - I might use them to make a mask for Fuzzaxe...


Cool...looking forward to seeing it

-
Great photos Nix and glad to see you feeling better to where you could get out.

-
@Noa Isumi said:
Day18
Today we're going to be taking a look at the axe multi-tool.
This particular example is the Stanley version although they are made in a ton of different labels add configurations. In truth I've never seen one actually sharp enough to call an axe or even to cut for that matter. Usually these are chunky and dull along the lines of crate openers; I have a feeling that's more they intended use.
The handle packs a saw, file w/ flat tip screwdriver, small Phillips w/ bottle opener, and a knife that is questionable at best. The whole thing is made out of 'high-grade' mystery steel, with plastic handle scales.So now the question is what use is it? what have I been able to accomplish with it?
I have used this thing a few times usually in its function as a crate opener. That flat hammerhead is perfect for driving small tacks. The chunky thick dull axe blade is actually handy as a wedge when you need something thicker than a molding bar but smaller than a full size crowbar.Also a pic inside my EDC duffel
Well that is an interesting Stanley

-
day 19: a bunch of us are going on a hike today. and yes that is my boot

-
Day 19.
Been a wet and windy day here, but the sun came out this afternoon and despite the wind I started to make this tree into smaller bits. The wood is actually quite soft. The last pic I was able to one hand chop this piece in about 25 strokes and if is slightly thicker than the width of Bruce's bit
Sent from my SM-G970F using Tapatalk




-
Nice hike and Lyndax use, Nix!

Must be nice having a pile of axes now, Borg, instead of a pile of broken axes?

Awaiting the mask un...masking
Fuzzy! 
-
@Nix said:
Perhaps see a doctor? Maybe there is something they can do about that......@Nix said:
These things are outstanding and definitely worth their weight. They are made in California, so they must not cause cancer.Well the WHO lists bacon as carcinogenic so.....

@Nix said:
A cool and breezy day today, but I took the opportunity to get out for a nice hike. Haven't been out for a good hike in a couple weeks--it was great to get out!Looks like a nice outing, thanks for sharing.
-
Great pics and uses again everyone

-
@TazzieRob said:
Day 19.Been a wet and windy day here, but the sun came out this afternoon and despite the wind I started to make this tree into smaller bits. The wood is actually quite soft. The last pic I was able to one hand chop this piece in about 25 strokes and if is slightly thicker than the width of Bruce's bit
Sent from my SM-G970F using Tapatalk
Way to go!

-
Day 19
Axe vs Coconut Part 2, used the Estwing to chop open a young coconut.
Estwing obviously has a more acute angle than some of my other axes, and it chopped like a cleaver more than an axe. Didn't want to wake up the little guy fast asleep, so had to chop as quietly as possible, took a few extra chop than I wanted to, but luckily got it done nonetheless.

-
A cool and breezy day today, but I took the opportunity to get out for a nice hike. Haven't been out for a good hike in a couple weeks--it was great to get out!
I was using a small daypack, a bit small for leggy Lyndax. So her head went into the bag (with mask), and haft went into an outside pocket.

This worked quite nicely.
Since it was a cool day, I brought along my little wood-fired stove and some tea fixings.
It's been raining (and snowing) on and off for a few days, and much of the wood on the ground was damp. Lyndax got used to collect some dry wood from dead branches sticking up in the air.

To make some tinder and kindling, I sank Lyndax's toe in a downed log, then pulled bits of split wood down along the edge to generate fine curls and shavings.

This worked really well. Forgot my bandana, so collected shaving and kindling in my hat......

When I had collected enough, I loaded the stove up, set it up in the lee of a rock outcropping, and used the ferro rod in the above photo to spark up a fire. Lyndax is mostly curvy and smooth, so I had to use her primary edge to spark the ferro rod. Worked like a champ, but did roll a slight burr. I hate to use my primary tool's working edge to spark a fire, but it was an emergency (well, it was lunch time any way.).

It was a fantastic day to sit outside, admire the view, sip hot tea and eat a bit of trail mix. I brought along some of these Copper Cow Creamer packets.
stock product photo, but you get the ideaThese things are outstanding and definitely worth their weight. They are made in California, so they must not cause cancer. Makes delicious campfire tea.
My target for the hike was to climb this hill (they call it a 'mountain', but if you've been to Colorado you know it's a 'hill'.).

Energized with hot tea and lunch, it seemed like an easy hike.
Then I noticed this coming up behind me......

Sure enough, as I got to the summit I got caught in a proper snow squall. I was warm enough that my jacket was in my pack and I was just in a t-shirt and hiking pants (trousers in the UK, I suppose). With the wind and snow, I quickly became cold and started to move a bit more quickly to warm up! The squall was brief; I think it got hung up on the west side of the
mountainhill. I snuck down the east under mostly blue skies.Great hike and Lyndax was a champion companion, performing very well. A bit heavier than a large knife, but she may have offered a bit of an advantage in the wood-collection job.

Beautiful scenic, and like Steve said, thank you for taking us with you! That's awesome!

-
@Fuzzbucket said:
**Fuzzaxe Day 18 **Not much happening today. However, these saddler's rivets arrived in the post - I might use them to make a mask for Fuzzaxe...


I look forward to the FuzzAxe Mask!

-
@Noa Isumi said:
Day18
Today we're going to be taking a look at the axe multi-tool.
This particular example is the Stanley version although they are made in a ton of different labels add configurations. In truth I've never seen one actually sharp enough to call an axe or even to cut for that matter. Usually these are chunky and dull along the lines of crate openers; I have a feeling that's more they intended use.
The handle packs a saw, file w/ flat tip screwdriver, small Phillips w/ bottle opener, and a knife that is questionable at best. The whole thing is made out of 'high-grade' mystery steel, with plastic handle scales.So now the question is what use is it? what have I been able to accomplish with it?
I have used this thing a few times usually in its function as a crate opener. That flat hammerhead is perfect for driving small tacks. The chunky thick dull axe blade is actually handy as a wedge when you need something thicker than a molding bar but smaller than a full size crowbar.Also a pic inside my EDC duffel
Cute wedge! :D I think I used to have one similar like that, but with even crappier tools combination. The handle is so short that even the axe is sharp, it probably won't have enough momentum to 'chop' anything. But I think using it as a wedge might not be a bad idea, and might bring some residue value to this tool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

