SAK Pliers....
-
I love them. They're best viewed as super tweezers as some have stated, since they mostly excel at gripping small objects. My favorite tool for working inside computers and various electronics.
I once got a debit card jammed in a card reader at a local library (it was for library cards
)
and the pliers on my champ saved me from my own stupidity on that day. My Wave pliers would not have worked due to their size. -
See them as super tweezers, not pliers and they become immensely useful. I use them for detail work or small stuff i cannot grab with my fingers. Remove masking tape from tight spaces, splinter duty, grab and pull the plastic tab that sits on top of some bottles. Remove thorns from my dogs’ paws. That kinda stuff.
They are precise enough to pull a hair from your arm if need be :D -
Super tweezers, small tongs, weed puller, HD splinter removal. SAK spring straightener, brad/nail/punch guide...
Sure, they don't work on many most bolt applications etc., for me...but their usefulness, like most SAK tools, is usually only limited by ones own imagination.
I love mine and have a slight preference for the thinner 2.5mm '86/'87 versions found on Champs and Craftsman models. I still want to build a DT mod with them, but have other projects lined up that need them first.
-
I like them. I find them actually to be on the thick side though. Id use them more in builds if they were thinner. As it its the same thickness for example as both wood and metal saws. For their size and what can be done with them I think thinner would be plenty strong too.
I know there was an early prototype version that was thinner but then they went with the thicker option. -
There are a couple of videos on youtube with Vic pliers being used in the rescue of marine turtles, to remove a plastic straw or plastic fork that became stuck in the animal nostrils. Very cool, but definetly not for the faint of heart.
-
Ideal for small clasps,costume jewelry links,picking up some welfare asswipes discarded needles etc. Biohazard pick up of minor bloody bandages, sharps etc. Better to have and not use until needed type of thing.big tweezers.can opener lid dint lift up etc.
-
SAK pliers are an interesting tool. You can be perfectly happy without them. But once you have them and start using them, you will gradually find more and more applications in your day-to-day life. Until it's difficult to go back.
-
-
An absolutely brilliant small gripping tool I've used for many of the same reasons others here have given. I always have a knife with them close to me, if not on me. An indispensable tool when occasion demands.
I have a Wenger with pliers, have yet to use them. I like the slip joint design and the cunning wirecutter for very small gauge wire.
-
@tommywp said:
To give a different perspective, I have 1 SAK with pliers and don’t think I’ll ever get another. You can’t use them to bend anything bc you can’t tightly squeeze them given the design...which I think is an important function of pliers. Watched someone try to use them to straighten a bent prong on an electrical cord once and he was unsuccessful (had my skeletool on me and that took care of it)Fine for holding nuts and as super tweezers, but far less useful than even the small pliers on a squirt or dime. And they're a very thick layer...even the deluxe tinker is too thick for pocket carry in my opinion. May be heresy to some, but I think the pliers are neck and neck with the fish scaler in the race for least useful SAK tool (not counting the backside stuff)
I'm siding with TOMMY. I have a Tonker Deluxe. Nice knife but the plyers are not great. Some of that has to do with thier size but it also has to do with the fact that a good set of plyers has equal proportions handles on either side. These do not. And one of the handles is your cellidor.
This is my perspective as I always have a PST II or Rebar on me. Barring one of those, I have Squirt PS 4. But regular size Leatherman tool plyers actually come to more of a point than the SAK plyers for finer work, and will actually twist that bolt. I'm not sure the Swiss Army Knife plyers can do anything that a PS4 plyers cant do.
And yes, for all that space they take up in the Tinker Deluxe, they should be much more handy.
They are not bad per se, but there is are too many other good plyers out there, both big and small, for me to purchase a swiss army knife specifically for the plyers. I have the one set. I've purchased 2 Vic Champs - specifically not Swiss Champs, because I do not value Vic SAK plyers in the 91mm vehicle
-
What I mean to say, in short is...no pun intended but they'll do in a pinch.
-
See what I did there?
-
Sometimes a pinch is all it takes

-
Thanks for the applause W.
-
Barry, how are you and yours these days. Long time no see.
-
A Deluxe Tinker handles the vast majority of what I need at present. Sure, the pliers don't replace a 4" pliers tool, but it handles pretty much everything I'd attempt with a LM Squirt or Gerber Dime, and with better knife, scissors and drivers too.
-
I haven't used the SwissChamps pliers yet for anything more than trying them out. Like you, I use pliers more than anything.
Ive definitely needed smaller pliers but my squirt has handled those tasks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

