What did you use your Leatherman for today?
-
Was working on the car to find a rattling noise. After getting that taken care of, used the Crunch to cut the cold of a severely beat up oil pan heater. Closed the hood and noticed it was not closed properly. Used the hood release inside the car, and it was fully disengaged, yet I could not open the hood nor close it it down.
Used the Crunch and its file to reset the hood latch. Went to close the tools up and the file fell off. :ahhh Crystallized metal. /sigh
So, off to the fatherland for it (Leatherman HQ) to get repaired, and maybe they can look at those blasted pliers that won't stay shot. /grr

-
Oh no!!!! ???
-
@Outback in Idaho said:
Was working on the car to find a rattling noise. After getting that taken care of, used the Crunch to cut the cold of a severely beat up oil pan heater. Closed the hood and noticed it was not closed properly. Used the hood release inside the car, and it was fully disengaged, yet I could not open the hood nor close it it down.Used the Crunch and its file to reset the hood latch. Went to close the tools up and the file fell off. :ahhh Crystallized metal. /sigh
So, off to the fatherland for it (Leatherman HQ) to get repaired, and maybe they can look at those blasted pliers that won't stay shot. /grr

Got to love that warranty
-
@Outback in Idaho said:
Was working on the car to find a rattling noise. After getting that taken care of, used the Crunch to cut the cold of a severely beat up oil pan heater. Closed the hood and noticed it was not closed properly. Used the hood release inside the car, and it was fully disengaged, yet I could not open the hood nor close it it down.Used the Crunch and its file to reset the hood latch. Went to close the tools up and the file fell off. :ahhh Crystallized metal. /sigh
So, off to the fatherland for it (Leatherman HQ) to get repaired, and maybe they can look at those blasted pliers that won't stay shot. /grr

Oh boy

At least it’s fixable -
Had some spare time at work today - decided to clean up around a little. Among many other improvements disassembled and cleaned my tiny Bialetti espresso maker. Used a can opener to lift and remove a rubber part.

Next I found out that filtering part needs a bit of special attention. Since I don’t have a Swiss Champ or any other SAK with a pin - had to improvise [emoji2]

Anyways moments later the unit was again refreshed, proud and ready [emoji1305]

-
All those coffee machines need leaning! Great usage

-
Great job Alexanderre

-
Thanks, gents [emoji2]
-
Attempted to use my ST300 phillips head on a screw but all it did was strip it (old and not great quality screws). Then I attempted to use my 1/4" drive on my LM carabiner...it ended up being a 9/32nd
So close. Based on position of the screws (up inside a machine with minimal room) i was forced to get a socket. Was nice to get some time with the ST300 though.
-
Good try

-
Cant win em all


-
Carried my BO Surge today.
Used the saw to cut a USPS tray open. Got caught around parts of a machine. No other choice. Saved the day again.

-
Nice one BM

-
Super glue... Always the same story - was unable to undo the tube by hand. Could have used the pliers, but then something I was yet to try caught my eye - a carabiner can actually be a perfect wrench for the job [emoji1305][emoji736]

The stuck part actually got broken in the process but the tube was perfectly usable [emoji1316]

-
@alexanderre said:
Super glue... Always the same story - was unable to undo the tube by hand. Could have used the pliers, but then something I was yet to try caught my eye - a carabiner can actually be a perfect wrench for the job [emoji1305][emoji736]

The stuck part actually got broken in the process but the tube was perfectly usable [emoji1316]

That was a cool use!

-
Great use Alexanderre

I hate it when that happens to a tube of superglue ??? -
Which is why I buy the smallest tube and throw it away after using.
-
I have found keeping the spout clean and keep the tube
standing up after use stops the problem 90% of the time
-
You’re welcome alexanderre

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login