30-day axe challenge
-
@TazzieRob said:
It is a very nice looking handle. Spalting is not a term I'd heard before a few years ago. As the types of wood like maple and birch that seem to be common in the Northern hemisphere are introduced here, a similar type of thing happens with our native Sassafras. The darkening happens in the heart wood, so the term used is Blackheart Sassafras. It causes nice figuring and shades
https://www.wood-database.com/blackheart-sassafras/Unless you don't plan on using it for another year, why not make a mask now?
Yeah it is really nice, when i cut my firewood i always throw some of the interesting ones to the side, like this bit of Beech

I also really like the end grain on them and wanted to make a set of scales for a sak with it, i just don't think it will hold up very well and it will have no strength, i suppose plenty epoxy would hold it all together though


I wasn't serious about waiting a year to make the mask, i will get round to it eventually

-
Day 29

-
@Borg said:
Yeah it is really nice, when i cut my firewood i always throw some of the interesting ones to the side, like this bit of Beech
I also really like the end grain on them and wanted to make a set of scales for a sak with it, i just don't think it will hold up very well and it will have no strength, i suppose plenty epoxy would hold it all together though


I wasn't serious about waiting a year to make the mask, i will get round to it eventually

You could send it to someone to get it stabilized
That would make it plenty strong for scales 
Sent fra min FRD-L09 via Tapatalk
-
Or make it stronger by glueing
another piece of wood to the back of it
-
Nice pic Borg

-
@RF52 said:
You could send it to someone to get it stabilized
That would make it plenty strong for scales 
Sent fra min FRD-L09 via Tapatalk
Would that work with thin end grain though ? would be great if it did

@Wspeed said:
Or make it stronger by glueing
another piece of wood to the back of it
Good thinking batman, a nice thin bit of beech should match the colours, might not even notice it

-
Glad to help Borg

-
@Borg said:
Would that work with thin end grain though ? would be great if it did
Good thinking batman, a nice thin bit of beech should match the colours, might not even notice it

I think it would, as the stabilizing is filling the wood with some kind of resin/epoxy

Sent fra min FRD-L09 via Tapatalk
-
@Borg said:
Yeah it is really nice, when i cut my firewood i always throw some of the interesting ones to the side, like this bit of Beech
I also really like the end grain on them and wanted to make a set of scales for a sak with it, i just don't think it will hold up very well and it will have no strength, i suppose plenty epoxy would hold it all together though


I wasn't serious about waiting a year to make the mask, i will get round to it eventually

That is some great looking spalted wood.

-

@RF52 said:
I think it would, as the stabilizing is filling the wood with some kind of resin/epoxy
Sent fra min FRD-L09 via Tapatalk
True
i had a quick check how to do it myself, i just need an hvac pump and a vacuum chamber apparently, neither of which i have.. i will have a look around and see if anyone local can do it, i like this wood but rarely use it for anything because its so brittle, i now have options though, cheers guys 
-
Thanks Ray, the man with a van full of hvac pumps but 2000 miles away

-
True
i had a quick check how to do it myself, i just need an hvac pump and a vacuum chamber apparently, neither of which i have.. i will have a look around and see if anyone local can do it, i like this wood but rarely use it for anything because its so brittle, i now have options though, cheers guys 
I was thinking that myself when I found a piece of birch with a very nice pattern, but it got scrapped because of how soft the wood gets(rotten). A cool thing about stabilized wood is you can get it colored when stabilizing it
you can't really do it after it's stabilized though 
If you go through with it, I can't wait to see
Sent fra min FRD-L09 via Tapatalk
-
@Borg said:
Yeah it is really nice, when i cut my firewood i always throw some of the interesting ones to the side, like this bit of Beech
I also really like the end grain on them and wanted to make a set of scales for a sak with it, i just don't think it will hold up very well and it will have no strength, i suppose plenty epoxy would hold it all together though


I wasn't serious about waiting a year to make the mask, i will get round to it eventually

This wood really got character, would love to see it work out for some kind of scales.

-
True
i had a quick check how to do it myself, i just need an hvac pump and a vacuum chamber apparently, neither of which i have.. i will have a look around and see if anyone local can do it, i like this wood but rarely use it for anything because its so brittle, i now have options though, cheers guys 
I remembered reading something about this, and was wondering how strong is the vacuum chamber so there is enough negative pressure inside the wood to suck in all the resin. Must be some kind of a hardcore gear I presumed?

-
@comis said:
I remembered reading something about this, and was wondering how strong is the vacuum chamber so there is enough negative pressure inside the wood to suck in all the resin. Must be some kind of a hardcore gear I presumed?
Soft wood might shrink if I'm not mistaken because of the pressure.
Sent fra min FRD-L09 via Tapatalk
-
@comis said:
I remembered reading something about this, and was wondering how strong is the vacuum chamber so there is enough negative pressure inside the wood to suck in all the resin. Must be some kind of a hardcore gear I presumed?
It's worth looking into i think, there are so many beautiful woods out there that we wouldn't consider using otherwise, even bone would benefit from being stabilized probably, i think basically enough vacuum to remove air and replace it with resin..no clue what pressure that is though

Thanks David

@Syncop8r said:
Did anyone else look for the outline of their country on that piece of wood?:D the beauty of it is, if you cut a few mill off it it will change the map

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login