Swisschamp owners club
-
I sold mine...

-
greetings, experts. I have a Swisschamp. The outer liner of my knife is bent.
- Because I love and appreciate this tool, do you know the right non-destructive way to fix this problem?
- Is there a possibility to repair without removing the scale?
The answer from you experts will be very appreciated. Sincerely Thanks

-
Hi abwaluyo
This is the layer next to the cap lifter/large flat driver.
Unfortunately there is no easy way to repair a bent liner at the pivot area.
Without the opportunity of inspecting the knife, it’s difficult to make an assessment.
You could try pressing the SAK together in a vice between layers of hardboard for protection. This may help press the liner flat without removing the scales. (Fold the CS out to prevent pressing it).
If this does not work, next would be more forceful work involving removing the scale and using a light hammer to remodel the liner. Obviously this and above techniques are not without risks (...no responsibility, etc, etc)
Final option is a rebuild. Either factory or modder.
Good luck!

-
@abwaluyo said:
greetings, experts. I have a Swisschamp. The outer liner of my knife is bent.- Because I love and appreciate this tool, do you know the right non-destructive way to fix this problem?
- Is there a possibility to repair without removing the scale?
The answer from you experts will be very appreciated. Sincerely Thanks
I'd try a C-clamp and use some of the suggestions above. I'd open the Caplifter/SD too, to press the bent liner against it.
If that doesn't work, you're probably best off sending it to Victorinox for warrantee repair. I don't see why it wouldn't be free aside from shipping.
-
@Max Stone said:
Hi abwaluyoThis is the layer next to the cap lifter/large flat driver.
Unfortunately there is no easy way to repair a bent liner at the pivot area.
Without the opportunity of inspecting the knife, it’s difficult to make an assessment.
You could try pressing the SAK together in a vice between layers of hardboard for protection. This may help press the liner flat without removing the scales. (Fold the CS out to prevent pressing it).
.....Thank you very much
What does the CS stands for? -
@kamakiri said:
I'd try a C-clamp and use some of the suggestions above. I'd open the Caplifter/SD too, to press the bent liner against it.If that doesn't work, you're probably best off sending it to Victorinox for warrantee repair. I don't see why it wouldn't be free aside from shipping.
A Clamp would be a good idea.
I'm not sure whether to send it to the Victorinox representative store in my country. but I will try to find out.
-
yup -
thanks to all of you. I'll let you know the results. hopefully it works.

-
Good luck

-
Here's mine.
Members of the club - Is there any tool on the SwissChamp that you haven't used, or feel like you dont need?
I could do without the file... blasphemy, I know... but I just never need one.
What about you?

-
I have used every tool on the SwissChamp but
the fish scaler is probably been used the least -
@Wspeed said:
I have used every tool on the SwissChamp but
the fish scaler is probably been used the leastI figure most people use that the least - I've used to the ruler and the forked hook disgorger (for unintended purposes) enough times to consider it useful. At one point I nearly bought the Fisherman for that reason. It's lucky that I didn't have the money at the time, because I haven't used the fish scaler in a while, and I need the saw more often nowadays.
-
Some folks will hate me for this but I've never been a huge fan of the pliers. :-[ Add a lot of thickness to the SAK and I wouldn't miss them if they were gone.
-
Nothing wrong with that Gareth

If we all liked the same tools than Victorinox wouldn’t
have to make so many different models of SAKs :D -
@Gareth said:
Some folks will hate me for this but I've never been a huge fan of the pliers. :-[ Add a lot of thickness to the SAK and I wouldn't miss them if they were gone.I use my Champion (SC minus pliers) much more often to be honest. But I have this recurring nightmare that I will need those little pliers and I won't have them with me. :ahhh
-
@Gareth said:
Some folks will hate me for this but I've never been a huge fan of the pliers. :-[ Add a lot of thickness to the SAK and I wouldn't miss them if they were gone.I will agree. While they are good for some tasks, they would never handle the plier abuse I deal with at work. Mainly because they are too small.

for home, messing with small parts they work just fine.
-
The SwissChamp for Sunday

-
The Dolphin screwdriver for me. I just don't have a big use for it. Great to see some Swisschamp love!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
