??? 84mm. Two layers. Blades; scissors; no openers.
-
Early model, with small-blade instead of combo-opener tool. All original as it can be - early GOLFER

-
Nice Golfers, Sawl and Marko

Sent from my iPhone using Tapatalk
-
I agree with the Golfer assessment. My opinion is that the double leaf black oxide spring puts these all solidly in the '73-'75 range. Backup 'proof' is the corkscrew 'matches' other knives I have dated into the same range. If it had an awl, I'd be able to put it into the earlier or latter ends of that range.
The clip point isn't an issue/conflict for this date range in <u>84mm</u>.

-
In the hope to clarify what I believe is an error, I don't think the LNF versions like the 244k were ever Golfers.
I believe the Original Golfer is based off the 136ka Craftsman, but with horn scales. First listed that I know of in the 26 Model Catalog (which I believe is mid-late '60s) My guess is that it was directly succeeded c. '73 with the 0.3102 version and followed by the 0.1602 in the late '70s.


-
They (not victorinox, but US-marketing) used the same name for different models. So better than searching for a name is to check the numbers given for the different models.
The "golfer" model with mainblade, small blade, scissors and backside tools exist since ca. 1900. Then, it was called a model Nr. 207k. The tools/configuration changed a lot over the years. For a specific time period, there were two different configuration, with or without the long nailfile, and with different numbers.
-
Thanks, M0rconi and jaya_man. Your one's a beauty, Morconi. 8)
It's nice to have an interesting model and get the story behind it. I knew very little about the Golfer until yesterday and nothing of its history. I'm constantly amazed at the depth and breadth of experience and knowledge here!

-
@ulli said:
They (not victorinox, but US-marketing) used the same name for different models. So better than searching for a name is to check the numbers given for the different models.The "golfer" model with mainblade, small blade, scissors and backside tools exist since ca. 1900. Then, it was called a model Nr. 207k. The tools/configuration changed a lot over the years. For a specific time period, there were two different configuration, with or without the long nailfile, and with different numbers.
The Golfer in the picture has an Artisan or Fieldmaster Small toolset. This is very different from the classic Golfer's toolset of the 70s and 80s, so they can't share the same lineage. They only have the name in common.
The Vic "fossil record" shows that the classic Golfer belongs to a lineage with the 244k as an ancestor. Thanks, ulli, for pointing out that that lineage has a very long history. If I understand correctly, it continues today with the Compact.
-
@ulli said:
They (not victorinox, but US-marketing) used the same name for different models. So better than searching for a name is to check the numbers given for the different models.The "golfer" model with mainblade, small blade, scissors and backside tools exist since ca. 1900. Then, it was called a model Nr. 207k. The tools/configuration changed a lot over the years. For a specific time period, there were two different configuration, with or without the long nailfile, and with different numbers.
I understand that the toolsets have been around for ages. What most people have trouble with, is that there is no proof that the 244k or 207k was ever called a 'Golfer'. Even the newer runs with the LNF where there are BOXED examples, there is no GOLFER label to be found. Therefore, I do not believe the LNF versions were ever Golfers.
If I am wrong, there will be some catalog or boxed version of the LNF knife out there with the label on it.
@Sawl Goodman said:
The Golfer in the picture has an Artisan or Fieldmaster Small toolset.Craftsman toolset



-
My copy:

forgot it also has a blank rear tang

Mine should be '73 or '75 for that.
-
I've always loved the 84 mm Golfer, ever since I bought my first one at a shop in Zurich in 1988. I had never seen in person an older model with the clip point blade and no combo tool, however. I picked this one up the other day, so now my collection of these is essentially complete. I have one Golfer with the combo tool and long nail file and several combo tool Golfers without the LNF.
Note the aluminum-headed tweezers and what appears to be nickel silver shield/cross device.



-
So I see that there is no Golfer Club thread. Maybe we don't need one, but it occurs to me that we could simply establish this thread (with a more findable/logical title) as the Golfer Club thread. Anybody else think this is a good idea?
-
I don't know about a club thread...I still think the LNF versions were never officially Golfers.
But I'm glad I didn't pick that one up for myself when I saw it...because you got it to complete your collection!
Congrats on both counts! 
-
@kamakiri said:
I don't know about a club thread...I still think the LNF versions were never officially Golfers.But I'm glad I didn't pick that one up for myself when I saw it...because you got it to complete your collection!
Congrats on both counts! 
You could be right, Kamakiri. My LNF box doesn't say "Golfer," only 0.34 22
-
@kamakiri said:
Stranger things have happened. :D
Yeah, I'd like to see just one...with a correct printed name and number. Or from earlier era ones like yours, I don't think the 3 layer LNF version would fit.
Here's one with name on box but without number to my regret. Just hope it is not wrong box ;)
https://www.ebay.com/itm/1960s-new-in-box-84mm-Victorinox-VICTORIA-1ST-TYPE-GOLFER-LONG-NAIL-FILE-VTG-SAK-/352785036988?hash=item5223a076bc%3Ag%3A6~oAAOSwXkVddBXs&nma=true&si=QDk9U8KUcyQzRq85LhXS32BT3uM%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557

Sent from my iPad using Tapatalk
-
Wow, what a beauty! Is this one on its way to you, jnoxyd?
-
Sorry 
That is just flat out beautiful.
-
@jnoxyd said:
Here's one with name on box but without number to my regret. Just hope it is not wrong box ;)
https://www.ebay.com/itm/1960s-new-in-box-84mm-Victorinox-VICTORIA-1ST-TYPE-GOLFER-LONG-NAIL-FILE-VTG-SAK-/352785036988?hash=item5223a076bc%3Ag%3A6~oAAOSwXkVddBXs&nma=true&si=QDk9U8KUcyQzRq85LhXS32BT3uM%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557

Well...
I thought I had all the 84mm and 91mm Golfer variants, but I was clearly mistaken. And it looks like I won’t own them all any time soon.
-
Some very nice Golfers here!

@Myron said:
So I see that there is no Golfer Club thread. Maybe we don't need one, but it occurs to me that we could simply establish this thread (with a more findable/logical title) as the Golfer Club thread. Anybody else think this is a good idea?Seems sensible to me to make it a club, given it's turned into a general Golfer thread anyway. 8)
I've got no objection to the title changing. Its use by date has long passed!
-
@jnoxyd said:
Here's one with name on box but without number to my regret. Just hope it is not wrong box ;)
https://www.ebay.com/itm/1960s-new-in-box-84mm-Victorinox-VICTORIA-1ST-TYPE-GOLFER-LONG-NAIL-FILE-VTG-SAK-/352785036988?hash=item5223a076bc%3Ag%3A6~oAAOSwXkVddBXs&nma=true&si=QDk9U8KUcyQzRq85LhXS32BT3uM%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557

Suspect. ;)
Seems like the wrong type of box. I'd expect a single leaf like that to come out of one of the end-flap type with model numbers on it. Lots of post +PAT examples already do. I think the slider boxes start in the '73-'74 range and I think even the 84mm made the switch to double leaf black springs. Does it have the light green cardboard box liner?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login