Gerber Recoil multi tool question
-
Thanks to incredibility knowledgeable contributor to this site, Chako I've learned about several Gerber multi tools and information I've never known before recently. Sincerely, I am impressed in what I've learned as I've been under the impression for several years that Gerber was mostly known for their MP600 multi tools.
Anyway, despite the reasonable concerns and perhaps even questionable design of the Gerber Recoil, I still am interested in this product. Amazingly I found a seller for one of these units, however as luck would have it, this unit may or may not have some issues as shown in a image below.
<a href="https://ibb.co/30TFHFK" target="_blank" rel="noopener noreferrer"><img src="https://i.ibb.co/30TFHFK/Gerber-Recoil.png" alt="banner" style="max-width: 100%; height: auto;" /></a>
This is missing what appears to be the "central bolt" or perhaps "pivot" may be a better descriptor, but I am curious if anyone here, perhaps even Chako may know if this unit is still safe to use with this piece missing. Below is another image, as perhaps this may provide a better idea of what is missing.
<a href="https://ibb.co/XbdQ8Tn" target="_blank" rel="noopener noreferrer"><img src="https://i.ibb.co/XbdQ8Tn/Gerber-Recoil-2.png" alt="banner" style="max-width: 100%; height: auto;" /></a>
Any thoughts would be greatly appreciated and once again, thank you Chako for the wonderful information.
-
I am uncertain if it is safe. What I do know...you are missing more than just a handle pivot as the whole pliers spring unit is also missing. From what I see on my copy...the handle pivots play no part in stopping the pliers other than to possibly keep them a certain distance apart for the internals to work. You must have the back pivot in place, otherwise, the whole tool would fall apart. I know the spring in these is fairly strong. Not sure how that would play with only 1 pivot point. I suppose you could always repair it by placing another similar sized nut and bolt to hold the two handles together more securely.
My suggestion is to pass this one up if you haven't already got it. These do come up from time to time, and patience might be the better option...that is unless you don't mind a bit of DIY repair.
-
@Chako said:
I am uncertain if it is safe. What I do know...you are missing more than just a handle pivot as the whole pliers spring unit is also missing. From what I see on my copy...the handle pivots play no part in stopping the pliers other than to possibly keep them a certain distance apart for the internals to work. You must have the back pivot in place, otherwise, the whole tool would fall apart. I know the spring in these is fairly strong. Not sure how that would play with only 1 pivot point. I suppose you could always repair it by placing another similar sized nut and bolt to hold the two handles together more securely.My suggestion is to pass this one up if you haven't already got it. These do come up from time to time, and patience might be the better option...that is unless you don't mind a bit of DIY repair.
Thank you very much for the response Chako. This forum's software is a little different than others I've used in the past, so I do I am learning as I go. That said, I figured this was missing more and for the price that is requested, this is WAY too much and due this being discontinued, I don't see there being a viable repair for this.
-
Here is what it should look like...
Missing the whole black plastic assembly that also contains the handle spring.
<a href="https://s145.photobucket.com/user/Chako_photo/media/Chako_photo006/IMG_8056small_zps1jquoy4r.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo006/IMG_8056small_zps1jquoy4r.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>You can see the black unit with the sprint at the top of the pivot point.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo006/IMG_8057small_zpsjhr3pwvg.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo006/IMG_8057small_zpsjhr3pwvg.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>A better view.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo006/IMG_8059small_zpsnt1z3uvg.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo006/IMG_8059small_zpsnt1z3uvg.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Thank you for posting that. Makes me wonder how one loses such a important aspect of the multi tool. Not surprised this tool didn't take off given the inherent issues of this activating when that would not be opportune.
-
No clue...other than; if there is a will...there is a way, lol.
Might have used it as a hammer?

-
That is the risk when you buy used items. At least in this case, the person was up front with the issues. Using a multi tool as a hammer wouldn't surprise me, haha.
Seriously though Chako, I appreciate the insight.
-
You are welcome.

-
This may be a question for the moderators, given your knowledge and how much this has benefited me, is there a place in the Gerber section for general opinions and questions about Gerber multi tools specifically? I've only owned the Center Drive+, Fiskars branded MP600 and the modern version of MP400, so I am thinking of potentially expanding this as most of my knives are from Gerber as well.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login