Victorinox Astronaut - its the real thing!
-
Here's the letter confirming that Mastercraftsman was being issued to Astronauts:
So Neil just needs to 'roll' an NASA Astronaut , simple ;) ;).
You could put on one of those adult nappy drive non stop across the USA.............
that has already been tried hasn't it
:P :P :P:ahhh You scare me Mat :D
Neil
Well how much do you want an Astronaut + Space Shuttle SAK's Neil.

What would you be willing to do
:P -
Well I've already got a Shuttle so I figure something only mildly depraved :P
Neil
-
[quote author=NKB link=topic=10986.msg204552#msg204552 date=1241952490]
Well I've already got a Shuttle so I figure something only mildly depraved :PNeil
Ain't no fun in mild depravity...either go whole hog,or go home :D
::)
Tart :PNeil
You've had a peek into my resume,haven't you?
I'm not that brave!

Neil
[/quote]
Discretion is the better part of valor...or something like that
Seriously...I live in a part of the country,where the rare,and oddball shows up in the most unlikely places..if I run across one..I'll give you a shout.
-
@Gareth said:
A little section from a letter to Victorinox:"Please allow me to introduce myself. My name is Edward M. Payton of Rock Island, Illinois, USA. My brother is an astronaut and last year flew with the ?Discovery? space shuttle. He took one of your pocket-knives with him: my brother flew with a Master Craftsman Swiss Army Knife as part of his equipment. He, and all the other astronauts, were given a knife like this so they could use it during their flight. My brother needed this knife for a number of tasks during the flight . He was full of praise for the Master Craftsman because it functioned well even under the difficult conditions of space flight - weightlessness..."
Full thing can be read here:
http://www.victorinox.ch/index.cfm?site=victorinox.ch&page=220&lang=E&highlight=astronaut
I remember reading that story before but I had missed that here recently. Thanks for pointing it out Gareth. I also found a couple of other things relating to this.
Here in this article about 3/4's the way down the page there is a sub-article named "More on NASA knives", you will see a couple familiar photos and some interesting reading from Tom Wolfe who wrote an article for "Blade" magazine.
http://www.usmilitaryknives.com/knife_knotes_10.htm
Also, if you read the question and then click on the reply from Robert Elsener on the Victorinox Forum over at the Vic.ch Swiss website it helps explain that other "Astronaut" knife which is really no more than an early Master Craftsman that was renamed to fit the popularity of the times. Be sure and click on the link just under the question and you can read Robert Elsener's reply. I have another inquiry on this commemorative waiting for a reply from Mr. Elsener as well.
Here is a link to that other "Astronaut" knife over at Bond's of London.
http://www.bondsoflondon.com/catalouge/moredetails.asp?id=2078&cid=28
http://www.victorinox.ch/index.cfm?site=victorinox.ch&page=107&lang=E&action=show&for_thema=Taschenmesser&for_page=1&for_msg=20090415105535 -
[quote author=Bison56 link=topic=10986.msg204589#msg204589 date=1241960441]
[quote author=NKB link=topic=10986.msg204552#msg204552 date=1241952490]
Well I've already got a Shuttle so I figure something only mildly depraved :PNeil
Ain't no fun in mild depravity...either go whole hog,or go home :D
::)
Tart :PNeil
You've had a peek into my resume,haven't you?
I'm not that brave!

Neil
[/quote]
Discretion is the better part of valor...or something like that
Seriously...I live in a part of the country,where the rare,and oddball shows up in the most unlikely places..if I run across one..I'll give you a shout.
[/quote]I would be more than grateful for any assistance in my hunt for Moby :D
Neil
-
A little section from a letter to Victorinox:
"Please allow me to introduce myself. My name is Edward M. Payton of Rock Island, Illinois, USA. My brother is an astronaut and last year flew with the ?Discovery? space shuttle. He took one of your pocket-knives with him: my brother flew with a Master Craftsman Swiss Army Knife as part of his equipment. He, and all the other astronauts, were given a knife like this so they could use it during their flight. My brother needed this knife for a number of tasks during the flight . He was full of praise for the Master Craftsman because it functioned well even under the difficult conditions of space flight - weightlessness..."
Full thing can be read here:
http://www.victorinox.ch/index.cfm?site=victorinox.ch&page=220&lang=E&highlight=astronaut
I remember reading that story before but I had missed that here recently. Thanks for pointing it out Gareth. I also found a couple of other things relating to this.
Here in this article about 3/4's the way down the page there is a sub-article named "More on NASA knives", you will see a couple familiar photos and some interesting reading from Tom Wolfe who wrote an article for "Blade" magazine.
http://www.usmilitaryknives.com/knife_knotes_10.htm
Also, if you read the question and then click on the reply from Robert Elsener on the Victorinox Forum over at the Vic.ch Swiss website it helps explain that other "Astronaut" knife which is really no more than an early Master Craftsman that was renamed to fit the popularity of the times. Be sure and click on the link just under the question and you can read Robert Elsener's reply. I have another inquiry on this commemorative waiting for a reply from Mr. Elsener as well.
Here is a link to that other "Astronaut" knife over at Bond's of London.
http://www.bondsoflondon.com/catalouge/moredetails.asp?id=2078&cid=28
http://www.victorinox.ch/index.cfm?site=victorinox.ch&page=107&lang=E&action=show&for_thema=Taschenmesser&for_page=1&for_msg=20090415105535Thanks Wayne, I'd seen the bit on the Vic. forum but the other was a new read
I wonder what the varying astronauts are carrying now? Reading the piece, I wonder if we'll ever find out.Neil
-
I have yet to get an answer from Mr. Elsener in Swiss but personally I feel like the Master Craftsman was the knives bought by NASA in the late 1970's and then when the fame of the new Space Shuttle launches came about in the 1980's, Victorinox changed the name so folks would know which ones the Astronauts were using. It probably didn't hurt sales either to have the name change. Then to add even more sales drawing power they add a Space Shuttle to the scales. All of these knives were Master Craftsman models overlapping 1991 so the Space Shuttle knives had different blade configurations due to new tools being released. Back in 1989 when the Astronaut Commemorative was released I am unsure why they changed to a different model of knife.
I am hoping Mr. Elsener will have some details to answer some questions and suppositions about these NASA related knives.
If you have not been to the SAKWicki.com lately I have added some of the photos to the "Craftsman" model page describing this knife.
-
@stressmaster5000 said:
If you have not been to the SAKWiki lately I have added some of the photos to the "Craftsman" model page describing this knife.(fixed link)
Thanks for updating the wiki
and please, everyone who has the knowledge and/or pics do the same. It can be an invaluable resource for all of us but we have to make it so. A little bit at a time. -
@stressmaster5000 said:
I have yet to get an answer from Mr. Elsener in Swiss but personally I feel like the Master Craftsman was the knives bought by NASA in the late 1970's and then when the fame of the new Space Shuttle launches came about in the 1980's, Victorinox changed the name so folks would know which ones the Astronauts were using. It probably didn't hurt sales either to have the name change. Then to add even more sales drawing power they add a Space Shuttle to the scales. All of these knives were Master Craftsman models overlapping 1991 so the Space Shuttle knives had different blade configurations due to new tools being released. Back in 1989 when the Astronaut Commemorative was released I am unsure why they changed to a different model of knife.I am hoping Mr. Elsener will have some details to answer some questions and suppositions about these NASA related knives.
If you have not been to the SAKWicki.com lately I have added some of the photos to the "Craftsman" model page describing this knife.
Got an email note from Mr. Elsener about this knife. I am hoping he will have more to add, but here are a couple of links on the Victorinox Forum website as to what he had to say.
"thank you very much for your request dated 08th May 2009 and being interested in our pocket tool 1.4773 (astronaut). It matches the model Craftsman and has in addition the metal inlay of an astronaut and an etching regarding the moon landing on the blade. It is a corporate product and produced for the 20th and 30th anniversary (1998)."
Yours sincerelyVictorinox AG
Robert Elsener
Quality manager
A link to this note on the forum web page;
http://www.victorinox.ch/index.cfm?site=victorinox.ch&page=107&lang=F&action=show&for_thema=Sammler&for_page=1&for_msg=20090520160844
Also he included a link to this photo;
http://b2b.victorinox.ch/A219/Astronaut.JPG
The photo is too large to display properly here so click and go to the Victorinox web page for it. -
So were there two runs and does the etching on the blade reflect this?
-
Right now, you know as much as I do. I emailed another question to Mr. Elsener about the White version as well as numbers produced. I will keep this thread updated when I get a response.
-
White version :ahhh there's a white version? Missed that, have you got a link to any pics?
-
@Neil said:
White version :ahhh there's a white version? Missed that, have you got a link to any pics?OK, so maybe I did not mention that before but Dan Jaquart, the president of VSAKCS, told me he has seen or heard of a White version but did not give anymore details about that and no photos either. The note from Mr.Elsener mentions a 30th anniversary model (1998?) and maybe that one is the White one or perhaps they just made another run of the first one at that time, or maybe there was both red and white versions made at the beginning? :ahhh I agree, it sounds all too confusing. I sure wish Victorinox themselves had been running a SAKWicki site all along and had this info on it.
-
That would have made life easier but perhaps just a little less fun :D We get to write the Victorinox Chronicles

-
I have yet to get an answer from Mr. Elsener in Swiss but personally I feel like the Master Craftsman was the knives bought by NASA in the late 1970's and then when the fame of the new Space Shuttle launches came about in the 1980's, Victorinox changed the name so folks would know which ones the Astronauts were using. It probably didn't hurt sales either to have the name change. Then to add even more sales drawing power they add a Space Shuttle to the scales. All of these knives were Master Craftsman models overlapping 1991 so the Space Shuttle knives had different blade configurations due to new tools being released. Back in 1989 when the Astronaut Commemorative was released I am unsure why they changed to a different model of knife.
I am hoping Mr. Elsener will have some details to answer some questions and suppositions about these NASA related knives.
If you have not been to the SAKWicki.com lately I have added some of the photos to the "Craftsman" model page describing this knife.
Got an email note from Mr. Elsener about this knife. I am hoping he will have more to add, but here are a couple of links on the Victorinox Forum website as to what he had to say.
"thank you very much for your request dated 08th May 2009 and being interested in our pocket tool 1.4773 (astronaut). It matches the model Craftsman and has in addition the metal inlay of an astronaut and an etching regarding the moon landing on the blade. It is a corporate product and produced for the 20th and 30th anniversary (1998)."
Yours sincerelyVictorinox AG
Robert Elsener
Quality manager
A link to this note on the forum web page;
http://www.victorinox.ch/index.cfm?site=victorinox.ch&page=107&lang=F&action=show&for_thema=Sammler&for_page=1&for_msg=20090520160844
Also he included a link to this photo;
http://b2b.victorinox.ch/A219/Astronaut.JPG
The photo is too large to display properly here so click and go to the Victorinox web page for it.Another e-mail from Mr. Elsener but it does not really clear up any questions. Here it is quoted;
thank you very much for your reply dated 20th May 2009. As you know the «1.4773 astronaut» is a corporate product made by Victorinox. In 1989 it was produced with the metal inlay of an astronaut and an etching regarding the moon landing on the blade.
We suppose that only a tool with the metal inlay of an astronaut has been ordered 10 years later. We did not find any templates for the 30th anniversary and do not have information for a follow-up order.
Unfortunately, we did not find any information about how many were produced or anything about a white scaled version (I do not think it exist).
If there is any further information that you require do not hesitate to contact us.
Yours sincerely
Victorinox AG
Robert Elsener
Quality managerWell, sounds like there was no 30th anniversary model and no white scaled model either. Sure was hoping to hear more about production numbers too. Oh, well. I guess this just makes them that much rarer. Sorry Neil. :-
Probably only one run of 2000 were done all in red. I say that since the serial numbers of the 2 I personally know about are in the mid 1000's. Still it is a nice and rare piece.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login