Vintage hand tool thread.
-
I purchased this tool lot because I saw one piece with a Craftsman logo with the pointed A. Ended up, there were in half inch thirteen regular sockets, three deep well sockets, a three inch extension, t-handle and universal Drive. In 3/8, there are seven sockets, pull bar, universal drive, a three inch extension and t-handle. There is also a DOE wrench, also in the lot was a set of Plumb ball peen hammers, a Stanley 66-008 Hurwood screwdriver, two Ford DOE wrenches, a Merit DOE wrench, a speedwell nut driver and Unikey hex wrench set, along with an odd lot of hex wrenches and a Billings DOE wrench. The little Craftsman box to the left was a separate purchase. 1950's era tools.
-
Haven't seen some of these fellows in a while but I thought some would find interesting. I just got the same wrench in pretty good condition, it is a little bent towards the fixed jaw but other than that it is just a little dirty. I payed 5 bucks for it and 20 for shipping
. I love to see these old tools and imagine how different the US was back then, Crescent, Utica, G.M. and many others all in NY. Times have changed...edit: Forgot to post the link to the thread :P Here it is:
/topic/18118 -
Frank Mossberg Bicycle Tool
Looked a lot like what I have been wanting in a multitool design, vertical wrench. Would like to find a smaller, lighter version like a Leatherman Crunch to EDC with.
Put this Mossberg the tool area on Rover.Crescent have their uses, this 'design' is more practical. Just try getting some company to implement it is like trying to milk butterflies.
Somewhere on the internet I saw a photo of an adjustable wrench in what looked like a vintage lighter case in size. Should of saved the photo. :'(


-
Nice little (I assume) adjustable wrench. What's the size?
-
@smiller43147 said:
Nice little (I assume) adjustable wrench. What's the size?Been so busy lately, and trying to get time to ride in between working two jobs. Did not measure it, but compared it to a Skeletool today if that helps any?
-
I understand that completely! This is a great thread everyone!
-
Finally got around and was able to get some pics.
German made Perfect Handle Style of Screwdriver, it was supposed to be an Irwin but ended up with this one. Too much hassle to send it back so kept it and started the restoration. It was heavily pitted and bent, handles are quite a mess too.
Bernard's Parallel Action Pliers, war time finish, no dog on the handles. Was just a little dirty and rusty. One of my favorites.
Keeping with the theme, Bernard's End Nippers, Dog on the handles, spring loaded, cuts really nicely. A little rusty and dirty.
Last but not least, G.M.Co. out of N.Y. Unbreakable (but not Unbendable) monkey wrench, hammer, prybar combination tool. Lovely tool with a very handy rapid traverse on the moveable jaw (it would not work with the one that doesn't move ;) ) a nice little hammer and a prybar with a V groove for nails. I'll have to get my hands on a press to straughten this puppy but till then it will be a nice little hammer.




-
Nice tools, I have one of those wrenches.
-
I'm sure you do, I remember that you were the first one to introduce me to the Plierench, and if I may add, what a fantastic collection you have! I'm still after one, but for now I'll try to get my Bernard family to grow a little more before I really go after a Eiffel Flash. I recently got a 8 inch model Bernard in ridiculously new condition
, as soon as I'm able to I'll get some pics.By the way, do you have any recent additions to the collection? I was wondering (if it is not too much trouble) if you could get a picture of the entire collection. Do you display them or keep them in drawers? Sorry for being so inquisitive, I really got bit by the tool bug.
Lastly a couple of the first vintage tools I got. Both came from the UK. Bike wrench by King Dick, this one looked like it was burried in the ground and left to rust for a few decades. Still works though! And the second one is a adjustable with a mechanism like the Fitz All Wrench, that uses a colar and a wedge to adjust to the desired size.


-
Thank you sir.

I am a terrible curator.
At this time everything is in boxes. I have time off around Christmas. I will get everything out and get some photos.I've added a few plierenches and some other older pliers. I have an eclectic collection.
Those Bernard, Lodi, and Schollhorn pliers are neat. I have several. I'll try to post a link to one of the older catalogs.
-
I am a terrible curator.
At this time everything is in boxes. I have time off around Christmas. I will get everything out and get some photos.I've added a few plierenches and some other older pliers. I have an eclectic collection.
Those Bernard, Lodi, and Schollhorn pliers are neat. I have several. I'll try to post a link to one of the older catalogs.
Worry not! I'm not the greatest either, I've got my my stuff either in the bench/desk because I'm not completely done cleaning it or they're up some spot were they'll fit.
I know there are better materials and more capable paralell action pliers (Knipex wink wink) but I really like The Bernard type, I've always found laminated tools interesting but Bernard is a whole other level of sheet metal work. The seems on the insede of the handle are really tight, with todays polymer overmolds nobody qould dream of making anything like a Bernanrd (whenever I say Bernard I'm just generalizing the style of pliers).
-
This is a catalog link from the Sargent website.
http://www.sargenttools.com/Customer-Content/WWW/CMS/files/Bernard_Catalog_29.pdf
-
.29 piece ratchet set, made in Japan, similar to an SK set made around the same time,
-
$6.50 US
Thorsen 3/8 ratchet, Proto pear head 3/8 ratchet, 1/4 pull bar, and sockets from Proto, Williams, SK, and Craftsman. Almost 9 pounds of rust.
-
Some old tools and some old tool boxes.

-
Mo'tools


-
No mo' tools

-
Walden, Hinsdale, and Indestro. Nice collection!
-
@Yadda said:
Walden, Hinsdale, and Indestro. Nice collection!Thank you. Actually the set in the large box is Duro which is identical to the Indestro.What is unusual in that set is the set of 4 point sockets.Never seen them before but they were pretty common on early cars mostly as drain plugs.There were two other sets of sockets in the box;one was 1/2 in hex drive and the other 9/16ths hex drive.
Here is a really old set of sockets by the Rex Wrench Co. which was only in business from 1906 to 1915. It was missing the drive handle when I bought it and a good friend who is a machinist made one for me. Luckily I found a picture of one on the Alloy Artifacts site posed next to a ruler so it was fairly simple to make an accurate drawing of the handle.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
