Swiss Tool???
-
I for one love the scissors on the Spirit, they feel a bit more "heavy duty" than the ones on the Swisstool (or SAKs), and you never have to worry about loosing/breaking the spring.
And no, they don't open very wide, but seeing how some here mod their own tools by swapping bit drivers for dedicated drivers, lanyardhole thingies for scissors, regular plier heads for plier heads with replaceable cutters and so on... I honestly don't understand the fuss about it since it's one of the easiest mods out there if you want to make them open up wider.
My biggest "problem" with the Swisstool/Spirit is the Phillips driver being a bit too soft and slippery. Especially if you're used to using a ST300 or Rebar (which have the best Phillips driver out there, in my opinion).
And on topic, fingerprints go away as easily as they appear, the curved handles on the Spirit look weird, but feel great, and although one hand opening is possible after a lot of practice (there was a time that I could open each tool on my Spirit with one hand), we just have to face it, it was not designed for it and spending two minutes just to open the knife one handed kinda defeats the purpose of the whole thing...
-
I modded my Spirit scissor and they are just bad. I guess coming from the superb 91mm scissors I got spoiled. I rarely deploy mine as a result of fail after fail.
I do use my phillips a lot and it is rather soft. I've also used he heck out of my inline Explorer phillips and its not as worn
.Over all both the Spirit and bigger brother SwissTool are very good tools. I do have to say if OHO is priority then these are not the tools for you. Can it be done? There are tools that are made to be OHO not figured out how to OHO so I'd go that way.
-
My Spirit scissors work fine. They are different from the regular 91mm, and are not as good at finer work. Yet I use mine while sewing leather, and they have no issues cutting thread. I would not use the them for fingernails, but everything else I had no issues

-
Swisstools are top notch, up to you for which one is better for you, spirit is lighter and more ergonomical, learn to love the partially serrated blade, great reach on the drivers and the chisel,isolation wire strippers are great. can get slippery due to high polish on the overall tool.
everyones milage varies, leatherman has the replaceable cutters and some one handed blades. all swiss tool blades open from the outside but not designed for 1 hand opening. also leathermans pliers are a bit pointier. Ive used both brands for 20 yrs, have a bucket full of the various models. I have broken my edc down into a heavy and light configuration. Light is spirit and 84mm sak with leatherman e33tx for flipper. heavy is surge and 91mm sak with Leatherman C33xT. carry wave in the car attached to first aid bag along with raptor and Z rex. Kitchen drawer tool is swiss tool 1998 pattern, still going strong. Best way is to find a store that has both and test in hand. Good luck in your search. I havent tried the Leatherman free series yet, but have a T4 coming for my x mas present. -
Tell him to stick with Leatherman but avoid the new Free.
-
@SirVicaLot said:
Just ignore the old grumpy guy :P :DWho let him off leash anyway?

Just keeping it real ;)
-
Rabar, minus the aggressive pliers, has the most amount of tools on board, next to a Swiss Tool. While OHO is great for some things on Leatherman, the handles have springs built in to hold those blades in and have been known to falter. Have cut my hands a few times from the blade coming ajar - Surge notably so. Had to modify the locking tabs slightly so they would engage into the blade notches more securely. - Had a battle over that with Julie Warner a while back. Then I showed them their mistakes later.
Victorinox does not have those issues, but when something gums up the joints or locking mechanisms the Leatherman can open easier for blade, file, saw access - but can jam up internally. A soap bath will fix either multitool - though Victorinox seem to operate better without oil and no not seem to rust.
Swiss Tool gives by far the most bang for the buck, and that chisel is quite a useful tool. It's doing a lot what I used an awl for on the Leatherman.
If you want, sharpen the can opener on the Leatherman and make it a short/fat awl. Not the best. But that small bit driver on the Leatherman is wasted space. Think it was put there cause they had nothing else that could fit in there and not interfere with the pliers when closing/closed.
Leatherman also can offer a better knife steel, the CM154 or S30V. While most whine about the hardness of the S30v I can honestly say it is worth the extra sharpening time as that steel will hold an edge much longer - and slices though meat like it was butter!
So if OHO blades and all those safety pins/springs are your thing, and getting a better steel option, get a Leatherman. If you want the best bang for your buck, and OHO is not a deal breaker, get a Swiss Tool or Spirit.
Got a Charge TTi (v1.0) back when Leatherman had a Friends & Family Sale and the TTi was listed at $134. No regrets.
Would stick a Wave in the toolbox or glove compartment in your vehicle at the bare minimum, and carry a Spirit X if you want a classy, sophisticated, elegant tool that has more going for it + giving more for the buck. I should of gotten a Spirit X ages ago!
-
IMHO, the Free series is way overpriced for what you‘re getting. The Rebar can do more and is only half the price. You just don‘t get those fancy magnets ::)
Or you just get a Spirit, have a great tool and no clumping

-
@SirVicaLot said:
IMHO, the Free series is way overpriced for what you‘re getting. The Rebar can do more and is only half the price. You just don‘t get those fancy magnets ::)Or you just get a Spirit, have a great tool and no clumping


-
@SirVicaLot said:
IMHO, the Free series is way overpriced for what you‘re getting. The Rebar can do more and is only half the price. You just don‘t get those fancy magnets ::)Or you just get a Spirit, have a great tool and no clumping

I HATE clumping on Leatherman. It's the lazy tool deployment option. Even the Free clumps and you have to put back the tools you don't want. Swisstools are classy, beautifully engineered tools
-
@TazzieRob said:
I HATE clumping on Leatherman. It's the lazy tool deployment option. Even the Free clumps and you have to put back the tools you don't want. Swisstools are classy, beautifully engineered toolsI like it when the tools clump (except when opening one of the blades). You can pick the tool that is easiest to pull out, and the ones that are more difficult to open come along, so you can pick what you need. Works fine for me ;).
And it may have started as "an issue" on the oldest Leatherman tools, but they did a great job of turning it into part of the design (by making it so that the knives do open without the other tools coming along, and the same goes for the Free, in my book the tool deployment works great on the Free).
As they say, "to each their own"... ;).
P.S.: I'm still a big fan of Swisstools as well, I tend to pick the tool that is most soothed for the chores I expect to face. Sometimes Swisstools are the best choice, other times a Leatherman is the must have. And the funny thing is, in the end they would all be able to do whatever I throw at them, guess I'm just a little spoiled, that's all...
-
@TazzieRob said:
I HATE clumping on Leatherman. It's the lazy tool deployment option. Even the Free clumps and you have to put back the tools you don't want. Swisstools are classy, beautifully engineered tools
I can‘t stand clumping either. I fixed it on the mod I made (Rebar parts on Blast body) by adding more washers, but that is something that should not happen. I picked that one tool implement for a reason, why would I want 4 more out, that I then have to push back in? 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login