Show off your Sak mod's!
-
Nice scales!
[It's not failure if you learn something from it]
-
Custom Titanium Workchamp 111 mm


-
Nice!
[It's not failure if you learn something from it]
-
Hi guys!
I'm not a fan of the nail file, although I can understand why many people like it. So I thought I could turn it into something more useful.
I used my Dremel 3000 to cut the tip, and then added an edge chisel grind, leaving a bit untouched to be able to choke on the blade without out cutting my self.
Then I used the Spyderco Triangle Sharpmaker for a bit of sharpening, and here is the result.
I chose a tanto style tip, because I can use the long edge as a knife, the small edge as a scrapper, and the tip, when held upside down as clam shell package opener (push cutting). The other tip is good for draw cutting.
It needs a bit of touch up of course.


Στάλθηκε από το HUAWEI VNS-L31 μου χρησιμοποιώντας Tapatalk
-
^^^ Interesting! - Nice!
Make sure you use the right side - if you do use the nail file as a nail file !!
-
@decustomforge said:
Custom Titanium Workchamp 111 mmNice - Anything else custom - Or just the scales
-
@Sakpan74Gr said:
Hi guys!
I'm not a fan of the nail file, although I can understand why many people like it. So I thought I could turn it into something more useful.
I used my Dremel 3000 to cut the tip, and then added an edge chisel grind, leaving a bit untouched to be able to choke on the blade without out cutting my self.
Then I used the Spyderco Triangle Sharpmaker for a bit of sharpening, and here is the result.
I chose a tanto style tip, because I can use the long edge as a knife, the small edge as a scrapper, and the tip, when held upside down as clam shell package opener (push cutting). The other tip is good for draw cutting.
It needs a bit of touch up of course.


Στάλθηκε από το HUAWEI VNS-L31 μου χρησιμοποιώντας Tapatalk
That is a nice mod. I don’t have many SAKs with nail files,but like that use.
-
Custom Titanium Wenger Voyager .. along with its genuine Titanium 1 brother
-
@decustomforge said:
Custom Titanium Workchamp 111 mmThats very nice looking!

-
@m47mu74nt said:
Custom Titanium Wenger Voyager .. along with its genuine Titanium 1 brotherNice looking Custom!

-
Took a page out of Jaya_man's book and his Jalox, but with a twist.
This really is a great combination of tools!
The pruner blade needed a little trimming [emoji16] to fit opposite to the Phillips. Other than that it worked out pretty cool!Merry Xmas every1!!



Sent from my Redmi Note 5
-
@FInixNOver said:
Took a page out of Jaya_man's book and his Jalox, but with a twist.
This really is a great combination of tools!
The pruner blade needed a little trimming [emoji16] to fit opposite to the Phillips. Other than that it worked out pretty cool!Merry Xmas every1!!



Sent from my Redmi Note 5
Very nice Mod with a great toolset.
-
Looks really good!
[It's not failure if you learn something from it]
-
That is fantastic! Is the opener next to the pruner blade a combo tool?

-
Here is an 84mm that I made for my wife using some 58mm tools as back tools.


-
Got a bit tired of the blue scales.
Took the sak apart and polished the scales to show the raw titanium. Was going to heat anodize them to a different color, but decided to leave it like this for a while!
I quite like it!
The before and after pictures.

Enviado do meu Redmi Note 5 através do Tapatalk
-
I did like the blue but raw titanium can't be wrong
-
I also liked the blue, was just kinda tired of it, and wanted to go with a different color...

Enviado do meu Redmi Note 5 através do Tapatalk
-
i didn't even notice the 1/4" hex drive cutout on the scale initially. Very nice. I love when people add that extra utility to their tools.
That is a spectacular set of tools.
-
Dismantled a Wenger PTC with the intention of adding the awl and eye-glass sd to my minichamp edc...

But that will happen when I have more free time... The wenger tools needs shortening, shaping and relocating the pivot hole...
Rather than letting the remaining tools get unused, I made a custom 65mm... Wenger Rogue?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login