Spirit owners club
-
So.. As I wrote in the spirit challenge thread, this came in yesterday


And to ask the same question here.. Any thoughts on how to carry this without using the original sheath? I have my own custom made sheath and thinking about adding an extra pocket or sleeve to hold it but I wanted to hear how the rest of you do before I bring out the leather
[It's not failure if you learn something from it]
-
Cut a small slit in the fold of my Rogue wallet, and screwed it inside. Easy, secure, and available when needed. Although you might want to remove it when going through a TSA checkpoint - not sure how they would react to that.


Am sure any wallet would suffice, as long as it's inside the fold.
-
I like that ideal

-
This place never fails to instruct! After checking my Spirit - turns out it has the 4 line tang.
Its proved invaluable at work - carried it every working day since July 1st and have put it to use each and every day.
-
The wealth of information here is fantastic 
-
I'll be pocketing my Spirit X today, you guys inspired me.


-
Looked at a video comparing SwissTools to Spirits and am satisfied with the X.
Giving up heavier pliers, more ounces/weight, and rulers. Even on the Charge TTi had only rarely used the ruler. And of those times, going past the middle I was skeptical of accuracy anyhow. Think the most I used it for was to measure bolt width or length, maybe other small items. Rulers are nice, but not a deal breaker considering losing the ergonomics & feel for more weight and plain jane blocky appearances. SwissTool doesn't have a hole in the awl either.

Spirits are too sexy and fit very well. :D There is no comparison save maybe a Juice KF4, yet then the tools are nothing like the Spirit. And that chisel... ♥♥♥♥♥
Maybe will have to keep an eye out for a portable ruler/micrometer to EDC if there such a thing? Although I do not use one often. Or carry a small plastic ruler inside the sheath or inside a wallet?
@twiliter said:
I'll be pocketing my Spirit X today, you guys inspired me.
Grats!
Welcome to the Elite Class of multitools. 
-
@Outback in Idaho said:
Looked at a video comparing SwissTools to Spirits and am satisfied with the X.Giving up heavier pliers, more ounces/weight, and rulers. Even on the Charge TTi had only rarely used the ruler. And of those times, going past the middle I was skeptical of accuracy anyhow. Think the most I used it for was to measure bolt width or length, maybe other small items. Rulers are nice, but not a deal breaker considering losing the ergonomics & feel for more weight and plain jane blocky appearances. SwissTool doesn't have a hole in the awl either.

Spirits are too sexy and fit very well. :D There is no comparison save maybe a Juice KF4, yet then the tools are nothing like the Spirit. And that chisel... ♥♥♥♥♥
Maybe will have to keep an eye out for a portable ruler/micrometer to EDC if there such a thing? Although I do not use one often. Or carry a small plastic ruler inside the sheath or inside a wallet?
Grats!
Welcome to the Elite Class of multitools. 
I solved the ruler issue by adding a separate metal one.
See here: /post/445981
-
There's always the "handyman's helper" from Marbles. Never owned one myself but they've been around for years.
-
@gustophersmob said:
I solved the ruler issue by adding a separate metal one.See here: /post/445981
Where did you find such a small one and with hole measurement too boot? Want one. :)
-
I found them at a flea market years ago for $1. They were about 6” long originally and I cut them down to fit in the sheath.
Edit: no affiliation with this seller, but these are the same kind I got:
https://www.pjtool.com/hand-and-hobby-tools/measuring-devices/6-inch-ruler-wtih-drill-gauge.html
-
@TazzieRob said:
You could always cut down a 6" rule to 4" and it'd only cost a couple of bucksAm aware of that, and what I intended. Google & Amazon both failed to find any rulers with the bolt hole measurement on searched rulers, with Standard & Metric measurements. The more key words I entered the worse the results. Seen just about everything but what I wanted. :-\ - Now see that gauge does better than everything else that I used. :ahhh
@gustophersmob said:
I found them at a flea market years ago for $1. They were about 6” long originally and I cut them down to fit in the sheath.Edit: no affiliation with this seller, but these are the same kind I got:
https://www.pjtool.com/hand-and-hobby-tools/measuring-devices/6-inch-ruler-wtih-drill-gauge.html
Thank you.
Ordered one on Amazon, as I rarely get to a hardware store. Have so many things to do and not enough hours in the day.
-
@Outback in Idaho said:
Are these more collectable I ponder?
How would one search for a four lined Spirit anyhow?!?Are there any other indicators. like the Vic shield on pliers? Did it come with a variation of sheathing?
I don’t know if there are other indicators besides the 4 lines, but the shield on the pliers wont tell you. All of mine are 3 line versions with the shield on the pliers.
-
Small ruler came in from Amazon, and was able to reduce the file to a hair over 4 inches. Is printed on both sides. though did have to lightly file and sand the corners as the metal was way too sharp.
No way to carry in the sheath, so cut a slit below the rivets, and another slit down in further. Hope I did not screw anything up. No other way to carry the file in there as there is no back leather piece to slide it behind. It would fall out otherwise, and still might.
Do wished the Victorinox leather was stiffer. Starting to see some sag from wearing on a belt every day and driving a compact car.
-
While at work yesterday had to drop a tailgate down on a cart to put product on, since the cart was stacked to high to fit through the short doorways... And it was one that had a missing bolt. Now I did go and buy a couple of heavy steel bolts, and seriously considering to find a solid aluminum one for lighter weight. Just not sure how I will carry one yet.
In any case, the only tool long enough to fit was the file, and I really did not want to use the file, but it was needed and nothing else was available. Frito-Lay needs to take better care of their cheap Chinese carts.
Temporary File-Bolt

Another view

And I measured the head of the bolt, and bought a couple of cheap steel ones from Walmart before leaving.

Had used a PST in this fashion. It went for walkabout, but I did find it a couple of weeks later. Still no sign of the Flair.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
