~ The Great PST Challenge ~
-
I found 2 PST's here in Belgium, almost new for €30/each, a PST with sheath and a PST II without sheath. No shipping costs because somebody cameby my house to hand them over.

The count is now 31
-
Day 3/30
Had a evening with my colleagues yesterday, bowling and stuff. Slept in a cheap motel.
Somehow it feels like every other model has a loose showerhead. Been fixing them all over the world.
Phillips to the rescue, even though it was a bit small for the screw.
As I got the older version of the tool with the more centered screwdrivers I really understand why LM did improve them. When pressing and turning hard they tend to fold in.Over the day only minor tasks like opening waterbottles (used the whole closed tool as a lever).
Unfortunatelly no pic in action, but I made an evening shot with it inside the small Benchmade Nylon sheath I carry it in.


-
Day 3


Straightening a split pin on a mower wheel for removal, a job i have done countless times over the years using everything from Spirit to Surge and many others in between, it's the first time i have ever had this happen :( The broken bit is the one with the tip that had snapped off previously so i can only assume it was worse than i thought and it was weakened or cracked further up also

I believe the term is, it's been Pabloed

-
Day 3:
Various uses today, removed some engine hatches, took down a light fixture to change an inverter for fluorenscent lights and changed a pressure sensor cable that was clamped




-
Ouch - sorry to see/read that Borg...

On the upside, it may not be too late to send it in to LM for a warrantyrepairreplacement.Do you have another PST to continue the challenge with?
-
Thanks DT, i will just carry on with this, there are still 11 other tools so all is good

I don't plan to send it in for warranty, i bought it years ago second hand so wasn't my original purchase, i just wont feel right to expect Leatherman to replace it, it's nearly 23 years old so i reckon it did good

I will run it till the end of the challenge then throw it into the mod fodder drawer

-
Had a evening with my colleagues yesterday, bowling and stuff. Slept in a cheap motel.
Somehow it feels like every other model has a loose showerhead. Been fixing them all over the world.
Phillips to the rescue, even though it was a bit small for the screw.
As I got the older version of the tool with the more centered screwdrivers I really understand why LM did improve them. When pressing and turning hard they tend to fold in.Over the day only minor tasks like opening waterbottles (used the whole closed tool as a lever).
Unfortunatelly no pic in action, but I made an evening shot with it inside the small Benchmade Nylon sheath I carry it in.
Nice pics Shuya

What do you mean by a support group ? -

Straightening a split pin on a mower wheel for removal, a job i have done countless times over the years using everything from Spirit to Surge and many others in between, it's the first time i have ever had this happen :( The broken bit is the one with the tip that had snapped off previously so i can only assume it was worse than i thought and it was weakened or cracked further up also

I believe the term is, it's been Pabloed

Ouch

-
@Borg said:
Thanks DT, i will just carry on with this, there are still 11 other tools so all is good
I don't plan to send it in for warranty, i bought it years ago second hand so wasn't my original purchase, i just wont feel right to expect Leatherman to replace it, it's nearly 23 years old so i reckon it did good

I will run it till the end of the challenge then throw it into the mod fodder drawer

I would turn it in if I was you Borg, perhaps you get a new one from Leatherman.

-
@Dutch_Tooler said:
Yeah... thanks for the heads up Steve
Pity that all of them are in the States and there appears to be some sort of new Ebay export restriction filter that forbids shipping to Germany

I experienced the same for Belgium.

-
More great stuff guys

Except for poor, Borg
sorry to see that the pliers didn't hold up 
And thanks to all that liked my pics

-

Straightening a split pin on a mower wheel for removal, a job i have done countless times over the years using everything from Spirit to Surge and many others in between, it's the first time i have ever had this happen :( The broken bit is the one with the tip that had snapped off previously so i can only assume it was worse than i thought and it was weakened or cracked further up also

I believe the term is, it's been Pabloed

Oh no! :'(
-
@Shuya said:
Guys sitting in a circle, comforting each other that it will be alright some day and that its not as bad as it seems.
You know, like all those addicted do to reach the light, out of the rabbit hole.
OK I see
Vladimir told in another threat that he counted only for the PST 255 different models so not includes the PST II's. So I have a long way to go yet

-
-
Had a evening with my colleagues yesterday, bowling and stuff. Slept in a cheap motel.
Somehow it feels like every other model has a loose showerhead. Been fixing them all over the world.
Phillips to the rescue, even though it was a bit small for the screw.
As I got the older version of the tool with the more centered screwdrivers I really understand why LM did improve them. When pressing and turning hard they tend to fold in.Over the day only minor tasks like opening waterbottles (used the whole closed tool as a lever).
Unfortunatelly no pic in action, but I made an evening shot with it inside the small Benchmade Nylon sheath I carry it in.
Good observation Shuya, and good job

-
@McStitchy said:
You wouldn't mind selling me a nice PST 2?
Kinda helping you controlling your collection?
:DI have only 3 PST II's and they are all 3 different , sorry I won't sell them.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login