Flashlight Mini Reviews
-
@spudley112 said:
Excellent review Stefano!!!!
I too have attached beacon lights to a few bags/packs I used often for travel, and it managed to save my ass more than a few times at night. I gonna do a brief review on that soon. -
@spudley112 said:
Olight M2R Pro WarriorWhen the Black Friday deals started coming in, I was scouring the internet looking for ones I could not pass up. Olight came out with some great deals and I was able to get a couple of M2R Pro Warriors for $75 each. A lot of the folks over at BudgetLightForum are not too pleased with Olight on this one because it uses a proprietary battery and it is a bit expensive. When I mentioned the Olight Black Friday deals over at BLF, there were a lot of people that thought making the purchase was not very smart...but then again, we enthusiasts buy lights that the average person would laugh about in the first place. Besides, we buy Lithium Ion batteries for prices that seem ridiculous when compared to the prices of AA or AAA batteries. I guess it is all perspective. Me...I am happy with my purchase.
I bought this light because I intend to mount it on my M14 Rifle, but also because I saw a light that checks a few boxes for me in an EDC light as well. As I have previously stated, the things I like are long run times at lower levels, but also the ability to put out an incredible amount of light when needed. All this needs to have a UI that does not require me to go through a lot of settings that I don't want to use. I also like usb charging. I know there are many in the flashaholics community that have not warmed up to usb charging, but I love it.
The M2R Pro is a dual switch model. It has a tail switch and a side switch. Unlike many tactical lights of this configuration, you do not have to engage the tail switch first on the M2R Pro. The switches basically run two different UI functions on the light. The side switch is pressed to turn on the light at the last mode chosen. A long press activates the moonlight mode (1 lumen) and double pressing it activates turbo (1800 lumens). Triple tap for strobe. Once on, press and hold to cycle through brightness levels.
The tail switch can be pushed part of the way in and it activates the medium 2 mode (250 lumens) push in all the way for turbo. Pressing and holding activates momentary mode on the tail switch, but if you quickly press and release quickly (either half way or full press), the light will stay on until you press the tail switch again.
All of this might seem like a lot, but once you get used to it, it really is pretty simple. What I like about this set up, is that I can set the side switch to come on in moonlight mode, so any time I want to navigate without disturbing others, or destroying my night vision, I can just use the side switch. However, the setup of the tail switch lets me quickly access high light outputs without having to cycle up.
I will post run times and tech specs at the bottom of the page.
Here is the light. It is a tank of a "tactical" light and I can see this handling about any activity.

As you can see, the light is definitely aimed at tactical use.

Tail switch. It has three raised elements on the outer ring to prevent accidental activation and to allow the light to tail stand.

The tail switch and outer ring also act as the charging area for the proprietary magnetic charger. What it nice is there is no need to try to plug in a mini usb cable, The magnetic charger snaps onto the light with ease. The optional remote switch attaches this way also.


TECHNICAL DETAILS
Beam Distance (ft) 984.3
Beam Distance (m) 300
Max. Performance (lumens) 1800Charge type-MCC3 Magnetic USB Charging Cable
Compatible Batteries-Customized 5000mAh 21700 rechargeable lithium battery
Light Intensity (candela)-22,400
Lens / Reflector Type-Smooth reflector (central area and flood area).
Mode Operation-Dual SwitchLIGHTING LEVELS:
LEVEL 1 (lumens) 1800~750~250
Run-time LEVEL 1
4.5 minutes (145+45 minutes).LEVEL 2 (lumens) 750~250
Run-time LEVEL 2
160+40 minutes.LEVEL 3 (lumens) 250
Run-time LEVEL 3
10 hours.LEVEL 4 (lumens) 60
Run-time LEVEL 4
40 hours.LEVEL 5 (lumens) 15
Run-time LEVEL 5
130 hours.LEVEL 6 (lumens) 1
Run-time LEVEL 6
50 days.Strobe Yes
SOS / BEACON YesTECHNICAL CHARACTERISTICS
Waterproof IPX8
Weight (g / oz) 179g/6.31oz
Length (mm / in) 136.50 / 5.37
Head Diameter (mm / in) 29.50/ 1.16
Body Diameter (mm / in) 26.20/1.03
Led High performance neutral white LED
Packaging Carton box
Use hunting, tactical, military, security and protection, police, EDC, outdoor, professional activities, police;Package Contents
Olight M2R Pro flashlight x 1
Stainless Steel Pocket Clip x 1
Customized 5000 mAh 21700 Rechargeable Lithium Battery x 1
MCC3 Magnetic USB Charging Cable x 1
Lanyard x 1
Holster x 1
user manual x 1I like how well built is the light, and how the end part helps the light to stand with a tailcap.

-
@comis said:
I remember seeing a few of your lights are being modded by Vinh, and am curious are there any great benefits to that? Or it caters the light better to the user(tint/levels)?I remembered back in the days when led tech just came in, people on cpf were finding all different ways to retrofit the led and circuit with multiple levels/features into exist bodies. But as time progressed, all those bells and whistles became the new norm, and the need to mod felt less necessary.
His mod vary in complexity but may be as complex as emitter, optics, and drivers.
The FourSevens Mini, pictured above, has a different emitter, driver and is also boosted in output power. The Mini has an SST 40 that gives 1200 lumen with 20 different configurations available depending on personal preference.
I also have an Emissar D4 v2 by Vinh that has throw optics and a different emitter (White 2). This configuration has a decrease in max lumens to 3900 but increase the throw by about 80m to 424m.
I also have a Jetbeam RRT01 with just a different emitter (HiCri SST20) which was main.y because he was one of the first people to have them for sale.
-
@Sos24 said:
His mod vary in complexity but may be as complex as emitter, optics, and drivers.The FourSevens Mini, pictured above, has a different emitter, driver and is also boosted in output power. The Mini has an SST 40 that gives <u>1200 lumen with 20 different configurations available</u> depending on personal preference.
I also have an Emissar D4 v2 by Vinh that has throw optics and a different emitter (White 2). This configuration has a decrease in max lumens to 3900 but <u>increase the throw by about 80m to 424m</u>.
I also have a Jetbeam RRT01 with just a different emitter (HiCri SST20) which was main.y because he was one of the first people to have them for sale.
These are wild numbers!
I am wondering is there a driver smart enough to know the difference between li-ion rechargeable vs primary batteries, so it will know when to stop or when to completely vampire drain the batteries, while maximizing efficiency and runtime?

-
I can only dream of lights like that
:o


-
Great review of the Thrunite T1. I really dont "need" another light BUT I'm off to look at this light a little further. While I like my Olight S1R Turbo had I seen this I think I'd have it instead. No regret as I both would serve purpose in my small light stable.
-
@spudley112 said:
Excellent review Stefano!!!!Such a nice option when camping/hiking. Dark comes fast this time of year and a hike planned for a few hours can sometime end with us still on the trail.
-
@Aloha said:
Great review of the Thrunite T1. I really dont "need" another light BUT I'm off to look at this light a little further. While I like my Olight S1R Turbo had I seen this I think I'd have it instead. No regret as I both would serve purpose in my small light stable.I have an S1 Mini and hardly use it because the Thrunite T1 is far superior in my opinion. The only advantage the S1 Mini has really, is that it is a little bit smaller.
-
You are not helping :D. I really do like my S1R so it wouldn't be a replacement per se. I like to carry my S1R when I feel like a lot of light could be needed. My ZL SC52 L2 is my go to for most every other time. So I can see the T1 fitting in nicely within those two.
-
@Aloha said:
You are not helping :D. I really do like my S1R so it wouldn't be a replacement per se. I like to carry my S1R when I feel like a lot of light could be needed. My ZL SC52 L2 is my go to for most every other time. So I can see the T1 fitting in nicely within those two.Long ago I gave in to my addiction. lol.
I was telling a buddy last night that I prefer not to get gifts for birthdays or Christmas. I always ask my folks to just give me a Christmas card if anything at all. Heck, my mother gave up on getting me anything for my birthday years ago because she knows how I am. Usually, if I want something, and I can afford it, I just get it. I am proudly single and after years of relationship pain (bad marriage, failed engagement, needy girlfriends etc) I made the decision to avoid all that. Now I can pretty much get what I want when I want it. Ahhh...I love this life. haha
-
@comis said:
These are wild numbers!I am wondering is there a driver smart enough to know the difference between li-ion rechargeable vs primary batteries, so it will know when to stop or when to completely vampire drain the batteries, while maximizing efficiency and runtime?

The resultant numbers are one of the reasons I like his mods. I know that those kinds of changes are pushing the light harder which will result in less runtime but as long as it is something your aware of then your good.
As far as detecting the difference between li-ion and primary, I do not know of Vinh’s drivers doing that, but HDS does as long as you do a quick reset after changing. I also know the Fenix lights tend to have a “Low-voltage warning” when using rechargeable li-ion.
-
EagleTac D25c MkII (and some info on the D25a)
I think EagleTac flashlights are often overlooked but the few I have perform well. This is actually my wife’s favorite flashlight and the one she always uses.
For a CR123 flashlight with a tail switch it is smaller than a lot of its competitors at 2.9 x .78 inches.
The flashlight can use 16340 but the website warns to only use protected ones at a specific dimensions. So avoid oversized ones like some manufacturers make (Fenix ARB-L16-700U (one with micro usb port built in) specifically comes to mind). I have had no problem using Olight 16340s and Fenix without the micro usb.
This light comes in both cool white and neutral emitters depending on your preference, including a HiCRI Nichia 219.
The exact lumens vary slightly based on the emitter you choose. The maximum ANSI lumens comes from the cool white CREE XP-L HD V6 which is 365. The Nichia 219 has the lowest maximum lumens at 220. The runtime on high is 54 minutes.
The flashlight has 3 different mode groups. When the head is tightened, the H/Strobe group is selected. If you loosen the head slightly then the L/M/H becomes selected. Switching Moonlight on/off is simple and explained in the Tech Specs.Group (Head Loosened) Moonlight (ML) Off = L > M > H > L > M > H > Various Strobes
Group (Head Loosened) w/ Moonlight (ML) = ML > L > M > H > ML > L > M > H > Various Strobes
Group (Head Tightened) = Turbo > StrobeThe tail switch is a reverse clicky (meaning the light comes on when switched fully pressed then released) and switches brightness levels by half clicks. The light remembers the last mode. From Group 1 the strobes are only accessed if you go through the brightness levels twice in succession.
The light can tail stand and has a one way clip. The light is also waterproof to the IPX8 standard like many other lightsHere is the actual manufacturer Technical Specification link which is very detailed: http://eagtac.com/html/d25crcmkii/specs.html
If this light sounds good, but you prefer AA, then check out the D25a. It is a very similar light to the D25c including UI and some of the same emitter choices. The D25a is .7 x 3.4 inches. The maximum lumens with the D25a is 286 from the XM-L2 U4 and 195 from the HiCRI Nichia 219c.
Here is the Technical Specifications of the D25a: http://eagtac.com/html/d25arcmkii/specs.html
EagleTac also makes a D3c and a D3a, which are very simi.ar lights but in titanium for those who want a titanium light.
Both lights are a solid choice if you are looking for a small tail clicky that still has some punch.
Here is a picture of both the EagleTac D25c and D25a with a SAK Climber for comparison

-
@Sos24 said:
EagleTac D25c MkII (and some info on the D25a)I think EagleTac flashlights are often overlooked but the few I have perform well. This is actually my wife’s favorite flashlight and the one she always uses.
For a CR123 flashlight with a tail switch it is smaller than a lot of its competitors at 2.9 x .78 inches.
The flashlight can use 16340 but the website warns to only use protected ones at a specific dimensions. So avoid oversized ones like some manufacturers make (Fenix ARB-L16-700U (one with micro usb port built in) specifically comes to mind). I have had no problem using Olight 16340s and Fenix without the micro usb.
This light comes in both cool white and neutral emitters depending on your preference, including a HiCRI Nichia 219.
The exact lumens vary slightly based on the emitter you choose. The maximum ANSI lumens comes from the cool white CREE XP-L HD V6 which is 365. The Nichia 219 has the lowest maximum lumens at 220. The runtime on high is 54 minutes.
The flashlight has 3 different mode groups. When the head is tightened, the H/Strobe group is selected. If you loosen the head slightly then the L/M/H becomes selected. Switching Moonlight on/off is simple and explained in the Tech Specs.Group (Head Loosened) Moonlight (ML) Off = L > M > H > L > M > H > Various Strobes
Group (Head Loosened) w/ Moonlight (ML) = ML > L > M > H > ML > L > M > H > Various Strobes
Group (Head Tightened) = Turbo > StrobeThe tail switch is a reverse clicky (meaning the light comes on when switched fully pressed then released) and switches brightness levels by half clicks. The light remembers the last mode. From Group 1 the strobes are only accessed if you go through the brightness levels twice in succession.
The light can tail stand and has a one way clip. The light is also waterproof to the IPX8 standard like many other lightsHere is the actual manufacturer Technical Specification link which is very detailed: http://eagtac.com/html/d25crcmkii/specs.html
If this light sounds good, but you prefer AA, then check out the D25a. It is a very similar light to the D25c including UI and some of the same emitter choices. The D25a is .7 x 3.4 inches. The maximum lumens with the D25a is 286 from the XM-L2 U4 and 195 from the HiCRI Nichia 219c.
Here is the Technical Specifications of the D25a: http://eagtac.com/html/d25arcmkii/specs.html
EagleTac also makes a D3c and a D3a, which are very simi.ar lights but in titanium for those who want a titanium light.
Both lights are a solid choice if you are looking for a small tail clicky that still has some punch.
Here is a picture of both the EagleTac D25c and D25a with a SAK Climber for comparison

Cheers Sos24.

I have the old D25A Clicky and, as a few folks know, it's my most carried light. Does the MkII have mode memory on the AA? Sadly mine doesn't but they might have updated that. It's the only minor niggle I have with the MkI.
-
I have the old D25A Clicky and, as a few folks know, it's my most carried light. Does the MkII have mode memory on the AA? Sadly mine doesn't but they might have updated that. It's the only minor niggle I have with the MkI.
Yes, the MkII has mode memory that can be toggled on/off depending on personal preference.
“Toggle mode memory - remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, wait for at least one second, and repeat loose and tight for three times.”
-
@Sos24 said:
Yes, the MkII has mode memory that can be toggled on/off depending on personal preference.“Toggle mode memory - remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, wait for at least one second, and repeat loose and tight for three times.”
Excellent. Thanks again.

-
Fenix E05 vs Lumitop EDC01
Both the Fenix E05 vs Lumitop EDC01 are single AAA flashlights that utilize a head twisty UI. The two lights are almost identical in size, but the Fenix have more of a knurling where as the Lumitop has a wavy body with knurling on the head
The Lumitop has a CREE XP-G3 whereas the E05 has an XP-E2.
Both lights have three brightness levels with turn on at low then each successive off/on goes to medium then high. The Lumitop EDC01 has a max brightness of 120lumens as compared to the E05’s 85 which is visually apparent. The higher max lumen of the Lumitop results in only a 30 minute runtime on high compared to the Fenix 45 minutes using Alkaline batteries. The Lumitop’s low of 5 lumen is lower than the E05’s 8 lumen which results in over twice the runtime if using low.
As far as water and dust resistance, the Lumitop is rated as IP68 to 1.5m while the Fenix is rated to IPX8 of 2m. So the Lumitop has been certified against dust intrusion whereas the Fenix has not been tested, but the Fenix is certified against water penetration to a greater depth.
Here are a couple pictures with the Fenix E05 on left and Lumitop EDC01 on right.



-
Thanks for reviewing and comparing.
My experience with AAA lights is with the old Fenix E01 and E05 (27 lumens) I wonder about the new model with 85 lumens how much heat it emits.
Do both lights at maximum power maintain an acceptable temperature? -
Great idea. I need to do some comparison reviews too. I have a few lights that are really close. My Sofirn SP31 and Fenix PD35TAC are very similar.
-
@spudley112 said:
Great idea. I need to do some comparison reviews too. I have a few lights that are really close. My Sofirn SP31 and Fenix PD35TAC are very similar.I remember that you have PD35 2.0
I have the PD35 TAC version and I'm thinking of a new toy, I'm undecided between PD35 2.0 - TK15 UE or Thrunite TC12 NW.
One thing that holds me back for PD35 2.0 is that the high level is "only" 350 lumens (TAC version and your Sofirn have 500 lumens)
If you compare the Sofirn vs the Fenix PD35 2.0 using not the Turbo but the High level do you see a lot of difference?
The Turbo is rarely used but the high level is important to me, I would have liked a High level of 500 lumens.
The Thrunite TC12 has 475 lumens on High level.
Your every visual impression is very welcome. -
I need to make a correction regarding the Lumitop EDC01:
The EDC01 brightness levels are Medium/Low/High.
@Stefano said:
Thanks for reviewing and comparing.
My experience with AAA lights is with the old Fenix E01 and E05 (27 lumens) I wonder about the new model with 85 lumens how much heat it emits.
Do both lights at maximum power maintain an acceptable temperature?The Fenix tolerates the heat better than the Lumitop. The EDC01 will get hot if left on high for a while. The Fenix E05 does get warm after being left on, but not hot. The Lumitop EDC01 gets hot after about 10 minutes of being left on high.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login