Spirit owners club
-
I found them at a flea market years ago for $1. They were about 6” long originally and I cut them down to fit in the sheath.
Edit: no affiliation with this seller, but these are the same kind I got:
https://www.pjtool.com/hand-and-hobby-tools/measuring-devices/6-inch-ruler-wtih-drill-gauge.html
-
@TazzieRob said:
You could always cut down a 6" rule to 4" and it'd only cost a couple of bucksAm aware of that, and what I intended. Google & Amazon both failed to find any rulers with the bolt hole measurement on searched rulers, with Standard & Metric measurements. The more key words I entered the worse the results. Seen just about everything but what I wanted. :-\ - Now see that gauge does better than everything else that I used. :ahhh
@gustophersmob said:
I found them at a flea market years ago for $1. They were about 6” long originally and I cut them down to fit in the sheath.Edit: no affiliation with this seller, but these are the same kind I got:
https://www.pjtool.com/hand-and-hobby-tools/measuring-devices/6-inch-ruler-wtih-drill-gauge.html
Thank you.
Ordered one on Amazon, as I rarely get to a hardware store. Have so many things to do and not enough hours in the day.
-
@Outback in Idaho said:
Are these more collectable I ponder?
How would one search for a four lined Spirit anyhow?!?Are there any other indicators. like the Vic shield on pliers? Did it come with a variation of sheathing?
I don’t know if there are other indicators besides the 4 lines, but the shield on the pliers wont tell you. All of mine are 3 line versions with the shield on the pliers.
-
Small ruler came in from Amazon, and was able to reduce the file to a hair over 4 inches. Is printed on both sides. though did have to lightly file and sand the corners as the metal was way too sharp.
No way to carry in the sheath, so cut a slit below the rivets, and another slit down in further. Hope I did not screw anything up. No other way to carry the file in there as there is no back leather piece to slide it behind. It would fall out otherwise, and still might.
Do wished the Victorinox leather was stiffer. Starting to see some sag from wearing on a belt every day and driving a compact car.
-
While at work yesterday had to drop a tailgate down on a cart to put product on, since the cart was stacked to high to fit through the short doorways... And it was one that had a missing bolt. Now I did go and buy a couple of heavy steel bolts, and seriously considering to find a solid aluminum one for lighter weight. Just not sure how I will carry one yet.
In any case, the only tool long enough to fit was the file, and I really did not want to use the file, but it was needed and nothing else was available. Frito-Lay needs to take better care of their cheap Chinese carts.
Temporary File-Bolt

Another view

And I measured the head of the bolt, and bought a couple of cheap steel ones from Walmart before leaving.

Had used a PST in this fashion. It went for walkabout, but I did find it a couple of weeks later. Still no sign of the Flair.
-
@Outback in Idaho said:
While at work yesterday had to drop a tailgate down on a cart to put product on, since the cart was stacked to high to fit through the short doorways... And it was one that had a missing bolt. Now I did go and buy a couple of heavy steel bolts, and seriously considering to find a solid aluminum one for lighter weight. Just not sure how I will carry one yet.In any case, the only tool long enough to fit was the file, and I really did not want to use the file, but it was needed and nothing else was available. Frito-Lay needs to take better care of their cheap Chinese carts.
Temporary File-Bolt
Another view
And I measured the head of the bolt, and bought a couple of cheap steel ones from Walmart before leaving.
Had used a PST in this fashion. It went for walkabout, but I did find it a couple of weeks later. Still no sign of the Flair.Now thats a interesting usage! Hope the Flair shows up.

-
Spirit with its brother, MP400 bladeless

-
Brothers are always great!

-
The Spirit at work


-
Awlways nice to see a Spirit!

-
First I drooled over the spirit for a long time, then I bought it and loved the tool but hated carrying it but now I have a hard time not having it and it has proven itself time after time and saved me lots of trips to the garage.. And belive it or not but I have used the file so many times where I otherwise would leave the edges ruff on projects that might not matter or be seen but then taking stuff apart again there is now a clean job.. Horizontal carry really made more differens then I first thought


[It's not failure if you learn something from it]
-
That is a great looking holster you have it in!

-
Thanks! I carry it at 1 o'clock and can hardly feel its there
[It's not failure if you learn something from it]
-
Nice!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
