The Hacked Leatherman Owners Club.
-
Would be nice to add the removable T-shank saw tool as you then have some choices on saw blades.

-
a variety of jigsaw blades would be very handy and could be carried around rather easily
by how to implement this would be the trick

-
Some ABURABURA abracadabra...

-
@ABURABURA said:
a T-shank will be too big.!I’m thinking to customs make a hook like the one Swiss Army knives have and maybe a serrated blade too!
-
Here's the mods I have done to a few of my LMs over the years:
On the ST200, I ground off the lock release tabs flush with the handles and I unlock the tools the same way as the original ST by lifting a second tool out 90° and closing them all. I also ground off the finger notches in the straight screwdriver blade and the Phillips bit to get more reach out of the tools. You can see the difference with the modified tool on the left vs the stock tool on the right.
On the ST300, I again modified the lock release tabs so they are flush with the handles and I unlock the tools the same way as the original ST by lifting a second tool out 90° and closing them all. My keys kept getting stuck in the lock release tabs in my pocket and I had to do something about it. I also ground the plier head smooth and ground the Phillips bit round so it would access recessed screws like my ST200. I also ground the small screwdriver bit smaller and thinned out the back of the saw blade.
On the Rebar, I ground the plier head smooth and ground the Phillips bit round so it would access recessed screws like my ST200. I didn't modify the release tabs on the Rebar because the gap was small enough that my keys didn't get stuck in there.



-
Great mods, Phil
thanks for sharing 
-
I did the same with my Rebar


-
Great mods

-
Great pic, Steve

-
On my Free P4, I swapped the saw with the serrated blade to access the serrated blade with my right hand.

-
Good idea

-
Nice mod, Phil


-
From which other Leathermans can i transplant the parts (inserts, pocket clips) to by Rebar?
there are few of broken leathermans running in my local classifieds (Croatia) but i wouldn't throw the cash if it ends up incompatible.
I would like to try this, cheaper option, before springing out for new parts.
-
@zoidberg said:
Welcome to the boards mate.
Short answer is the locking four inch Leathermans like the Wave, Charge and Blast etc.
The Kick pocket clip and screw is also worth a look.Thanks mate, i will look into that now.
Im not really good with manufacturing my own tools from metal, but fiddling/assembling something from parts is ok with me. Even some grinding/filing/cutting.
I own a Rebar for merely 24 hours now, but i already miss the pocket clip, i dont carry stuff on my belt. -
Good luck with modding, Ivan
Hope you can find some great deals 
-
Just got a Charge TTi+ for Xmas and I'm looking to add an awl to it. After doing a bit of research I've settled on a Rebar Awl, which should get in today. From what I've read, this should be a direct drop in correct? I think I saw that I should be able to swap it out for the mini driver or scissors.
Is this true or will it require some modification to play nicely? Stoked to be part of such a cool modding community!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login