Flashlight Mini Reviews
-
EagleTac D25c MkII (and some info on the D25a)
I think EagleTac flashlights are often overlooked but the few I have perform well. This is actually my wife’s favorite flashlight and the one she always uses.
For a CR123 flashlight with a tail switch it is smaller than a lot of its competitors at 2.9 x .78 inches.
The flashlight can use 16340 but the website warns to only use protected ones at a specific dimensions. So avoid oversized ones like some manufacturers make (Fenix ARB-L16-700U (one with micro usb port built in) specifically comes to mind). I have had no problem using Olight 16340s and Fenix without the micro usb.
This light comes in both cool white and neutral emitters depending on your preference, including a HiCRI Nichia 219.
The exact lumens vary slightly based on the emitter you choose. The maximum ANSI lumens comes from the cool white CREE XP-L HD V6 which is 365. The Nichia 219 has the lowest maximum lumens at 220. The runtime on high is 54 minutes.
The flashlight has 3 different mode groups. When the head is tightened, the H/Strobe group is selected. If you loosen the head slightly then the L/M/H becomes selected. Switching Moonlight on/off is simple and explained in the Tech Specs.Group (Head Loosened) Moonlight (ML) Off = L > M > H > L > M > H > Various Strobes
Group (Head Loosened) w/ Moonlight (ML) = ML > L > M > H > ML > L > M > H > Various Strobes
Group (Head Tightened) = Turbo > StrobeThe tail switch is a reverse clicky (meaning the light comes on when switched fully pressed then released) and switches brightness levels by half clicks. The light remembers the last mode. From Group 1 the strobes are only accessed if you go through the brightness levels twice in succession.
The light can tail stand and has a one way clip. The light is also waterproof to the IPX8 standard like many other lightsHere is the actual manufacturer Technical Specification link which is very detailed: http://eagtac.com/html/d25crcmkii/specs.html
If this light sounds good, but you prefer AA, then check out the D25a. It is a very similar light to the D25c including UI and some of the same emitter choices. The D25a is .7 x 3.4 inches. The maximum lumens with the D25a is 286 from the XM-L2 U4 and 195 from the HiCRI Nichia 219c.
Here is the Technical Specifications of the D25a: http://eagtac.com/html/d25arcmkii/specs.html
EagleTac also makes a D3c and a D3a, which are very simi.ar lights but in titanium for those who want a titanium light.
Both lights are a solid choice if you are looking for a small tail clicky that still has some punch.
Here is a picture of both the EagleTac D25c and D25a with a SAK Climber for comparison

-
@Sos24 said:
EagleTac D25c MkII (and some info on the D25a)I think EagleTac flashlights are often overlooked but the few I have perform well. This is actually my wife’s favorite flashlight and the one she always uses.
For a CR123 flashlight with a tail switch it is smaller than a lot of its competitors at 2.9 x .78 inches.
The flashlight can use 16340 but the website warns to only use protected ones at a specific dimensions. So avoid oversized ones like some manufacturers make (Fenix ARB-L16-700U (one with micro usb port built in) specifically comes to mind). I have had no problem using Olight 16340s and Fenix without the micro usb.
This light comes in both cool white and neutral emitters depending on your preference, including a HiCRI Nichia 219.
The exact lumens vary slightly based on the emitter you choose. The maximum ANSI lumens comes from the cool white CREE XP-L HD V6 which is 365. The Nichia 219 has the lowest maximum lumens at 220. The runtime on high is 54 minutes.
The flashlight has 3 different mode groups. When the head is tightened, the H/Strobe group is selected. If you loosen the head slightly then the L/M/H becomes selected. Switching Moonlight on/off is simple and explained in the Tech Specs.Group (Head Loosened) Moonlight (ML) Off = L > M > H > L > M > H > Various Strobes
Group (Head Loosened) w/ Moonlight (ML) = ML > L > M > H > ML > L > M > H > Various Strobes
Group (Head Tightened) = Turbo > StrobeThe tail switch is a reverse clicky (meaning the light comes on when switched fully pressed then released) and switches brightness levels by half clicks. The light remembers the last mode. From Group 1 the strobes are only accessed if you go through the brightness levels twice in succession.
The light can tail stand and has a one way clip. The light is also waterproof to the IPX8 standard like many other lightsHere is the actual manufacturer Technical Specification link which is very detailed: http://eagtac.com/html/d25crcmkii/specs.html
If this light sounds good, but you prefer AA, then check out the D25a. It is a very similar light to the D25c including UI and some of the same emitter choices. The D25a is .7 x 3.4 inches. The maximum lumens with the D25a is 286 from the XM-L2 U4 and 195 from the HiCRI Nichia 219c.
Here is the Technical Specifications of the D25a: http://eagtac.com/html/d25arcmkii/specs.html
EagleTac also makes a D3c and a D3a, which are very simi.ar lights but in titanium for those who want a titanium light.
Both lights are a solid choice if you are looking for a small tail clicky that still has some punch.
Here is a picture of both the EagleTac D25c and D25a with a SAK Climber for comparison

Cheers Sos24.

I have the old D25A Clicky and, as a few folks know, it's my most carried light. Does the MkII have mode memory on the AA? Sadly mine doesn't but they might have updated that. It's the only minor niggle I have with the MkI.
-
I have the old D25A Clicky and, as a few folks know, it's my most carried light. Does the MkII have mode memory on the AA? Sadly mine doesn't but they might have updated that. It's the only minor niggle I have with the MkI.
Yes, the MkII has mode memory that can be toggled on/off depending on personal preference.
“Toggle mode memory - remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, wait for at least one second, and repeat loose and tight for three times.”
-
@Sos24 said:
Yes, the MkII has mode memory that can be toggled on/off depending on personal preference.“Toggle mode memory - remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, wait for at least one second, and repeat loose and tight for three times.”
Excellent. Thanks again.

-
Fenix E05 vs Lumitop EDC01
Both the Fenix E05 vs Lumitop EDC01 are single AAA flashlights that utilize a head twisty UI. The two lights are almost identical in size, but the Fenix have more of a knurling where as the Lumitop has a wavy body with knurling on the head
The Lumitop has a CREE XP-G3 whereas the E05 has an XP-E2.
Both lights have three brightness levels with turn on at low then each successive off/on goes to medium then high. The Lumitop EDC01 has a max brightness of 120lumens as compared to the E05’s 85 which is visually apparent. The higher max lumen of the Lumitop results in only a 30 minute runtime on high compared to the Fenix 45 minutes using Alkaline batteries. The Lumitop’s low of 5 lumen is lower than the E05’s 8 lumen which results in over twice the runtime if using low.
As far as water and dust resistance, the Lumitop is rated as IP68 to 1.5m while the Fenix is rated to IPX8 of 2m. So the Lumitop has been certified against dust intrusion whereas the Fenix has not been tested, but the Fenix is certified against water penetration to a greater depth.
Here are a couple pictures with the Fenix E05 on left and Lumitop EDC01 on right.



-
Thanks for reviewing and comparing.
My experience with AAA lights is with the old Fenix E01 and E05 (27 lumens) I wonder about the new model with 85 lumens how much heat it emits.
Do both lights at maximum power maintain an acceptable temperature? -
Great idea. I need to do some comparison reviews too. I have a few lights that are really close. My Sofirn SP31 and Fenix PD35TAC are very similar.
-
@spudley112 said:
Great idea. I need to do some comparison reviews too. I have a few lights that are really close. My Sofirn SP31 and Fenix PD35TAC are very similar.I remember that you have PD35 2.0
I have the PD35 TAC version and I'm thinking of a new toy, I'm undecided between PD35 2.0 - TK15 UE or Thrunite TC12 NW.
One thing that holds me back for PD35 2.0 is that the high level is "only" 350 lumens (TAC version and your Sofirn have 500 lumens)
If you compare the Sofirn vs the Fenix PD35 2.0 using not the Turbo but the High level do you see a lot of difference?
The Turbo is rarely used but the high level is important to me, I would have liked a High level of 500 lumens.
The Thrunite TC12 has 475 lumens on High level.
Your every visual impression is very welcome. -
I need to make a correction regarding the Lumitop EDC01:
The EDC01 brightness levels are Medium/Low/High.
@Stefano said:
Thanks for reviewing and comparing.
My experience with AAA lights is with the old Fenix E01 and E05 (27 lumens) I wonder about the new model with 85 lumens how much heat it emits.
Do both lights at maximum power maintain an acceptable temperature?The Fenix tolerates the heat better than the Lumitop. The EDC01 will get hot if left on high for a while. The Fenix E05 does get warm after being left on, but not hot. The Lumitop EDC01 gets hot after about 10 minutes of being left on high.
-
Fenix PD35 TAC and Sofirn SP31 V2.0
I wanted to do a quick comparo of these two lights, but I don't want to bore everyone with minute details that can be easily researched. I just thought some comparison notes and pictures would be sufficient.
These two lights are very comparable. They are both what I would call "tactical" form factor lights. I am not sure why, but the word "tactical" has become one of those words that gets strong responses from some people. The responses range from sarcasm to outright eye-rolling. To me, it is just a word and I really do not have a problem with it.
In comparing the two lights, lumens and run times are fairly close:
Sofirn SP31 V2.0
Lumens 5 50 160 500 1200
Run Time 291H 26H 49M 9H 45M 3H 41M 2H 37MFenix PD35 TAC
Lumens 8 60 200 500 1000
Run Time 140H 29H 15M 8H 30M 2H 55M 1H 10MIt the pictures below it is easy to see that these two lights are very similar. Their general construction and function are very close.


The PD35 TAC has a crenulated bezel

Both flashlights are dual switch lights. A tail switch to turn on the light, and a side switch to set brightness level. The side switch on the Sofirn has an indicator light that shows for a few seconds when the light is turned on, that indicates battery level.


Beam Comparison: PD35 TAC on the right and SP31 V2.0 on the left
From about 5 feet away, the PD35 TAC beam has a bit wider hot spot and a warmer tint.

Outside from the balcony at my apartment, the light outputs at 1000 lumens look almost identical.
PD35 TAC

SP31 V2.0

-
Acebeam TK16
This is my newest light and a definite keeper.
At 2.61” x .9”, it is one of the smallest CR123/16340 flashlights with a tail clickie available.
General Information:- The light feels durable with a definite raised grippy pattern on the short barrel.
-The tail clickie is recessed to minimize the chances of accidental turn on and allow tail standing. - Water resistance is rated at 2m submersion and impact resistance rated at 1m.
- It also has a lock-out function to also avoid accidentally turning on.
- It has a low voltage warning.
- The pocket clip is deep bezel up carry.
Emitter and beam
It comes standard with 3x LEDs in your choice between three different emitters, depending on what is most important to you:
- Osram - Throw (338m)
- Cree XPG3 - Brightness (1800 lumens)
- Luminus SST-20 - 95+ CRI
[I have the SST-20]
The combination of three LEDs and TIR optics results in a very nice beam. Instead of a small hotspot with spill, it is more a uniform wider beam.
Operation
5 Modes: Moon, Low, Medium, High, Turbo. The lumens and runtimes of each depends on the emitter, power vs eco, and 16340 vs CR123. I’ve included charts of each instead of stating them
- Single-click goes to last used (memory)
- Holding down the button switches between L-M-H
- Double click from off or on: turbo
- Triple-click from off or on: strobe
- Press and hold 3 seconds: light enters moonlight-mode
- The switch requires a full click and does not have momentary capability
The light can get rather hot especially on turbo, but does automatically step down to avoid getting to hot. Using ECO mode will decrease the max lumens thereby increasing runtimes.
Conclusion:
Overall, I am really liking this little light. Time will tell, but I think I may prefer this to the Olight S1 Mini, Fenix E16, FourSeven Mini and EagleTac D25c. If it continues to perform, I think I will be getting the Osram version as well.
What I like:
- tail clickies
- ability to immediately access turbo from off or on
- strobe is not part of brightness levels, it is only accessible through triple click
- Small size
- Tail stands
- Accepts rechargeable 16340
- Moonlight mode
- Eco mode if runtime is important
What I dislike
- No momentary
- Would prefer the clip to be two-way or bezel down.
- Another brightness level between Medium and High would be nice
Pictured for size comparison Left -> Right: S1 Mini, 47 Mini, Acebeam TK16, EagleTac D25c




- The light feels durable with a definite raised grippy pattern on the short barrel.
-
Sherry, if you do get the Osram version, I'd love to see the beamshot comparison or your description of it. For the longest time I am reluctant to get a triple-led setup because of the potential limited throw and possible strange hotspot/sidespill. If the osram color retention is not too bad, this could be a good compromise.

-
Sherry....great review. I love those size lights. My Thrunite T1 still stands as one of my favorite lights. I wonder if the two way pocket clip from another light would fit the barrel on that light? Might be worth trying.
-
I will have a review coming soon on the Armytek Tiara C1. Just to give an update - I bought this light awhile back and I saw that on moonlight mode it claims 60 days of runtime. I decided to test it out and it has been running 24/7 now for three weeks. I thought I would do a review at one month and fill everyone in on its progress.
-
@comis said:
Sherry, if you do get the Osram version, I'd love to see the beamshot comparison or your description of it. For the longest time I am reluctant to get a triple-led setup because of the potential limited throw and possible strange hotspot/sidespill. If the osram color retention is not too bad, this could be a good compromise.
I will most likely end up getting it. I have the Osram W2 in both a Emissar D4 and Lumitop/BLF FW3a. They do pretty good on throw. I know the performance from the TK16 won’t be the same as either, but a small 16340 thrower would be a nice compliment to me HDS.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login