What did you use your Sak on today?
-
Boring, only the mail....

-
Better than nothing

-
@Manny Sanchez III said:
Here’s one... Not today, but yesterday at work. I was uh... going #2 and was done, and of course the roll was finished. And it’s in one of those metal dispensers that you slide a door on the bottom to dispense the second roll so ok, cool, I do that and thankfully I can feel that there is indeed a second roll in there. Well, the jerks that remodeled our bathrooms made that stall wall really close to the toilet, and the dispenser is mounted to it so it’s right up against my leg. They also mounted it really low, like if I’m getting paper I’m pretty much waving at whoever is in the stall next to me. So it’s awkward getting paper as it is, then you know how with new rolls you have to find the tag end and pull it to get it going? Well... I couldn’t find it. I tried and tried, and just couldn’t. I started getting desperate. I was tearing at the roll with no success and I had no idea what I was going to do.Enter the Climber.
I got the bright idea to use the small blade to just cut across the roll and then pull at the separated layer and it worked! I got that roll going and was able to leave that stall nice and clean! SAK saves the day!
No picture of the incident for obvious reasons, but here is the blade that saved the day!

Sent from my iPhone using Tapatalk


-
@Manny Sanchez III said:
Here’s one... Not today, but yesterday at work. I was uh... going #2 and was done, and of course the roll was finished. And it’s in one of those metal dispensers that you slide a door on the bottom to dispense the second roll so ok, cool, I do that and thankfully I can feel that there is indeed a second roll in there. Well, the jerks that remodeled our bathrooms made that stall wall really close to the toilet, and the dispenser is mounted to it so it’s right up against my leg. They also mounted it really low, like if I’m getting paper I’m pretty much waving at whoever is in the stall next to me. So it’s awkward getting paper as it is, then you know how with new rolls you have to find the tag end and pull it to get it going? Well... I couldn’t find it. I tried and tried, and just couldn’t. I started getting desperate. I was tearing at the roll with no success and I had no idea what I was going to do.Enter the Climber.
I got the bright idea to use the small blade to just cut across the roll and then pull at the separated layer and it worked! I got that roll going and was able to leave that stall nice and clean! SAK saves the day!
No picture of the incident for obvious reasons, but here is the blade that saved the day!

Sent from my iPhone using Tapatalk
...that's a good one Manny

-
Opened a closet door ... the latch bolt seems to have disconnected from the internal mechanism?


-
Great use

-
Needed the sak for a few bends and tweaks to finish captain nemo's nautilus, all from that flat piece you see there,,
Time for a new one,,

-
@ElevenBlade said:
Opened a closet door ... the latch bolt seems to have disconnected from the internal mechanism?
Nice

-
@MadPlumbarian said:
Needed the sak for a few bends and tweaks to finish captain nemo's nautilus, all from that flat piece you see there,,
Time for a new one,,Now that is pretty cool!

-
Yes... tomato juice in beer, raw egg in a beer hence the saying!

-
@MadPlumbarian said:
Needed the sak for a few bends and tweaks to finish captain nemo's nautilus, all from that flat piece you see there,,
Time for a new one,,Very cool. I’ve done a 3D wood puzzle, but never seen on of those.
-
@Sos24 said:
Very cool. I’ve done a 3D wood puzzle, but never seen on of those.Look them up there called Metal earth by fascinations, they have all sorts of things, some things they’ve stopped making but you can find them all over, and there’s other imitation company’s that make similar items, I like them no paint, unfortunately no glue, but you gotta bend and form something absolutely flat into something 3d with parts, all the parts connect with a flat piece that slide into a opening then it gets bent or twisted to lock it on the other side, that’s the tricky part, if just one or two fine, but when one piece has like five or more that you have to line up, err and there’s no room for play, to top it off, the metal isn’t thick so the more you bend it the weaker it gets and will fall apart, like I said tricky! And very small, only 3-4” so one of those magnified lights or glasses even with good eyesight..
JRHere’s a crappy pic of the ones I’ve done, I put the sak up just to give you an idea of size,

-
Just envelopes... I'm cool and boring

-
@MadPlumbarian said:
Look them up there called Metal earth by fascinations, they have all sorts of things, some things they’ve stopped making but you can find them all over, and there’s other imitation company’s that make similar items, I like them no paint, unfortunately no glue, but you gotta bend and form something absolutely flat into something 3d with parts, all the parts connect with a flat piece that slide into a opening then it gets bent or twisted to lock it on the other side, that’s the tricky part, if just one or two fine, but when one piece has like five or more that you have to line up, err and there’s no room for play, to top it off, the metal isn’t thick so the more you bend it the weaker it gets and will fall apart, like I said tricky! And very small, only 3-4” so one of those magnified lights or glasses even with good eyesight..
JRHere’s a crappy pic of the ones I’ve done, I put the sak up just to give you an idea of size,
Very cool.
-
Been very slow around here recently. I used the pen today, pretty much what the Fieldmaster has become! Oh, and the awl to clear an old tube of high temp silicone gasket. Vic should team up with Fisher and have space pen refills.

-
That would be awesome!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

