~ The Great PST Challenge ~
-
long day today and an early start tomorrow, so I'll have to catch up later.
Quick post for...
Day 18
Phillips driver on a Clam shell Grill repair.


-
Day 18. Put in some batteries, and removed some screws. Normally, I do not buy RC models that are not proportional control. Yet, I wasn't aware of there being a version of the Local Motors Rally Fighter. The motor is a bit too low-torque for my tastes, and geared for (too much) speed. I will likely get a Tamiya/Mabuchi Torque Tuned motor for the Mini 4WD line, and put it in place of the existing motor. Will need soldering, but still a drop-in fit.
If I can get my old Kyosho Mini Z Overland chassis fixed, my plans are to convert the body over to the hobby-grade Kyosho chassis.

-
@cody6268 said:
Day 18. Put in some batteries, and removed some screws. Normally, I do not buy RC models that are not proportional control. Yet, I wasn't aware of there being a version of the Local Motors Rally Fighter. The motor is a bit too low-torque for my tastes, and geared for (too much) speed. I will likely get a Tamiya/Mabuchi Torque Tuned motor for the Mini 4WD line, and put it in place of the existing motor. Will need soldering, but still a drop-in fit.If I can get my old Kyosho Mini Z Overland chassis fixed, my plans are to convert the body over to the hobby-grade Kyosho chassis.


-
Day 19
PST helped opening a few packets to make the breakfast noodle
Last I checked I was on Page 75...how does it get to Page 78 in half a day? :o

-
Shoot, you reminded me that I haven't tried that recipe yet....... :)
-
Hello day 18
My day 18 is one at rest. Am in London so a bit wary to get the PST out. Sadly they seem to have a lot of stabbing murders here so best the LM stays hidden. For those If you are visiting here the “History of the car” event at the V&a museum is cool.
A few very nice cars.

-
Day 18 was another great challenge day , love all the pics and PSTs

-
DAY 19
Just a PST with date stamps 0894/0894

I had to rearrange the PSTs in the circle because the old once have a wider plier so the circle was not perfect so now it is nearly perfect.
day 1 : PST no date
day 2 : PST 0497/0497
day 3 : PST 0795/0795
day 4 : BO PST 0795/0795
day 5 : PST no date
day 6 : PST no date
day 7 : PST 0194/0294
day 8 : PST no date
day 9 : PST 0896/1096
day 10 : PST 1200/0101
day 11 : JPST no date
day 12 : BO PST no date
day 13 : PST 0603/0304
day 14 : PST no date
day 15 : PST 0697/0697
day 16 : JPST no date
day 17 : PST no date
day 18 : JPST no date
day 19 : PST 0894/0894


-
@Pauldmmwc said:
Hello day 18
My day 18 is one at rest. Am in London so a bit wary to get the PST out. Sadly they seem to have a lot of stabbing murders here so best the LM stays hidden. For those If you are visiting here the “History of the car” event at the V&a museum is cool.
A few very nice cars.
There are many great museums to go to, but if you are nearby, I would also suggest the Wallace collection. IIRC, not too crowded, and everything is displayed in a more intimate setting. It has some of everything, and a pretty good collection of weapons and armors too.
-
Just a PST with date stamps 0894/0894

I had to rearrange the PSTs in the circle because the old once have a wider plier so the circle was not perfect so now it is nearly perfect.
day 1 : PST no date
day 2 : PST 0497/0497
day 3 : PST 0795/0795
day 4 : BO PST 0795/0795
day 5 : PST no date
day 6 : PST no date
day 7 : PST 0194/0294
day 8 : PST no date
day 9 : PST 0896/1096
day 10 : PST 1200/0101
day 11 : JPST no date
day 12 : BO PST no date
day 13 : PST 0603/0304
day 14 : PST no date
day 15 : PST 0697/0697
day 16 : JPST no date
day 17 : PST no date
day 18 : JPST no date
day 19 : PST 0894/0894Nice, looks it we are almost 2/3 done, and the circle is 3/4 full! That's a pretty impressive sight!

-
Awesome end to Day 18 and great start to Day 19, guys

Can't wait to see everything today

-
Day 19
Used the large flat driver as a pry bar.......


-

Houston we have a problem, it's lost, i think it is lying in the woods where i took yesterdays photo, i missed it this morning and now i'm home for lunch and don't see it in the house in its usual place

So to keep the wolves from the door have a DDR knife pic for no other reason than i had it , i will of course post two tomorrow if i find it, it will be dark when i'm back there but it's really the only place it could be, now to find my torch...

-
Excellent pics and uses again everyone

-
-
Got a decent looking Chinese sharpener today. Well, after trying it out, I wouldn't recommend it, the ceramic rods are super fine and because of the plastic construction, the don't sit firm, which is not ideal for keeping a constant angle. Anyway, you get what you paid for, it was on sale, a $10 gamble, so why not? It could have turned out to be good as well... Stay with your Sharpmakers, Worksharp or Lansky systems.
Thanks for trying out our for us

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

:D