~ The Great PST Challenge ~
-
Has anyone needed anything more than a PST? I'm honestly wondering why I got away from mine. They're great for anything I've come across, and don't even notice it's there.
-
Day 25; Christmas Carry. Normally, we held the celebration at my great-grandmother's house, which was in a rather rural area, and had a considerable amount of acerage around it. The house was the oldest in Burkes Garden (built in the 1830s, if I recall--there is a graveyard on a hill with Civil War and WWI graves), and as a result, I carried enough stuff to do light tinkering and repair, as well as tools I carried doing farm work, and hiking. This year, it was at the house my great-aunt bought a couple years ago, after her husband passed away. It's about 1000 square feet, of which 400 is a big garage. She has a lot of stuff, most of it fragile, as well as expensive furniture, so I ruled out sheaths or clips. Had a great time, ate a bit too much!
Honestly, given the amount of "outdoors" was smaller than our yard (and that accounts for both her house, and two empty lots), and I kinda think I went into overkill, basing it off what I used beforehand. I think I could have just carried the Gerber, light, and PST.
Gerber Magnum LST Jr. for folder. My great-uncle (who passed 5 years ago) got it in the '90s with a subscription to Buckmasters magazine. It's tough, lightweight, and perfectly sized. He'd carried it a lot as well, I guess because the ergonomics of the knife suited him as well as it did me. When I cleaned after getting it, it had a tablespoon of pocket lint, keeping it from lockup. It was used that much!
The PST. To handle most of the basics. Pliers, drivers, and a file.
quirt EL. A toolset to accompany the PST, and handle light electrical and precision/hobby type stuff.
Schrade USA 703 Penknife. Backup. Was my great-Granddad's, originally.
MiniChamp--scissors, mostly. And some extra drivers and a great pen--the MiniChamp is just thick enough for comfortable writing. I actually wrote an entire paper for college--with just a MiniChamp!
Olight i3EOS. I like a smaller light for EDC, and it's bright enough to get the job done.
Shelby Co. Can Opener. Everything was mostly ready by the time we got there, but just in case, I bought a can opener. Better be safe than sorry.
-
Nice

-
@Barry Rowland said:
Has anyone needed anything more than a PST? I'm honestly wondering why I got away from mine. They're great for anything I've come across, and don't even notice it's there.I haven't needed anything more than the PST. However, I haven't been quite as busy with various projects, either.
Still, the PST seems to have awl the major bases covered. For EDC, I'd pair the PST with a Vic Executive or Classic so I'd have a pair of scissors and a small blade as well. Otherwise, the PST has been outstanding so far.

And, the funny thing is: I like the LM Rebar because it reminds me so much of the PST. So.......why not just stick with the PST?

-
I agree on all counts Jack. About the only thing with the Rebar is that lovely saw and replaceable cutters, but the grade of the tool steel swings me back to the PST.
-
@Nix said:
I haven't needed anything more than the PST. However, I haven't been quite as busy with various projects, either.Still, the PST seems to have awl the major bases covered. For EDC, I'd pair the PST with a Vic Executive or Classic so I'd have a pair of scissors and a small blade as well. Otherwise, the PST has been outstanding so far.

And, the funny thing is: I like the LM Rebar because it reminds me so much of the PST. So.......why not just stick with the PST?

For me, it's sort of a double-edged sword. The PST is slim, and basic. Also doesn't weigh a whole lot. For a little less than three ounces, the Rebar adds a more robust build, all locking-implements, replaceable cutters, a saw, and a serrated blade (those being key for farm work, and usually mean I have to add two knives to add those tools if I carry the PST in the outdoors, an SAK for the saw, and a rescue knife for the serrations). It doesn't carry as well in a pocket, but is still fairly compact and can be easily pocketed. That's why, the Rebar and PST are, more or less, tied.
-
That saw is sweet! I wound up with 4 stitches in my knuckle from it when I was trimming branches for a tree stand with it several years ago.
-
Doing office work for the most part now days the PST has been an excelent carry. I still have trouble with the tools being inside and clumping for access to the SINGLE tool I want. I miss the scissors and saw. Please understand that those for me are personal preferances and in no way deminish the quality or genius of Tim's creation. The PST has an amazing buid quality and the over all tool selection is great, it has in no way let me down. The PST is a great little tool with way more BANG than it's size would lead one to belive, and it is just as valid a tool in todays world as it was the day Tim sold his very first one.
Now with that being said would any one be interested in jumping into the other end of the pond and doing a Swisstool Challenge for MARCH?
-
I don't believe I'm committed to anything, and I have one that's itching to be put to the test!
@Douglas said:
Doing office work for the most part now days the PST has been an excelent carry. I still have trouble with the tools being inside and clumping for access to the SINGLE tool I want. I miss the scissors and saw. Please understand that those for me are personal preferances and in no way deminish the quality or genius of Tim's creation. The PST has an amazing buid quality and the over all tool selection is great, it has in no way let me down. The PST is a great little tool with way more BANG than it's size would lead one to belive, and it is just as valid a tool in todays world as it was the day Tim sold his very first one.Now with that being said would any one be interested in jumping into the other end of the pond and doing a Swisstool Challenge for MARCH?
-
COOL!!!

I'll start invitation threads in the General Tool and SAK Knights sections tomorrow after work. PM me any Ideas you might have or want to include.
-
I sure will! I've been wanting to do it for awhile.
-
:ahhh :ahhh MARCH SWISSTOOL MADNESS CHALLENGE? :ahhh :ahhh
-
Perfect! I'm going to have to work out to get used to the heft after carrying the PST

-
I agree Jack, especially with the hiking we do. I just like the metallurgy of the PST better.
-
-
Very nice comis

-
Xmas was great , I love all the pics and tools

-
DAY 26
Another PST with date stamps 0397/0497
Circle is getting bigger every day.
day 1 : PST no date
day 2 : PST 0497/0497
day 3 : PST 0795/0795
day 4 : BO PST 0795/0795
day 5 : PST no date
day 6 : PST no date
day 7 : PST 0194/0294
day 8 : PST no date
day 9 : PST 0896/1096
day 10 : PST 1200/0101
day 11 : JPST no date
day 12 : BO PST no date
day 13 : PST 0603/0304
day 14 : PST no date
day 15 : PST 0697/0697
day 16 : JPST no date
day 17 : PST no date
day 18 : JPST no date
day 19 : PST 0894/0894
day 20 : JPST no date
day 21 : BO PST 0893/0893
day 22 : JPST no date
day 23 : PST 0195/0295
day 24 : JPST no date
day 25 : PST 1096/1296
day 26 : PST 0397/0497


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

