~ The Great PST Challenge ~
-
Day 30. Carried the 1996, but both PSTs and my 1995 Mini Tool (hard to believe, in April--it's out of warranty!).
All tools did the jobs necessary well. Yeah, the PST isn't linesman's pliers, and as the instructions have said--I recommend wearing gloves for really heavy gripping. But, every tool did its job. I did not really use the blades much, because the 1996's has a chipped tip, the no-date is bent. I've seen PSTs that had a hex bolt holding them together, really sharpened blades, busted drivers, and well, rough. The guy got it as a Christmas gift in the 1980s and was still carrying it. The PST is small, but built like a tank. Tell that to the ST300 small driver I've bent three times, once due to something I should not have done (bent rusted Phillips screw), the other times, light jobs. Can opener was not used at all, though I did use it on Thanksgiving, on cranberries). The PST isn't a tiny keychain tool, nor a gigantic Surge or ST300 level brute that requires a sturdy belt. It's just a simple "Pocket Survival Tool".
Now, I await my 112LT coming tomorrow, and starting on that challenge New Year's Day. PST's still getting used--I'd been using them in October and November, a lot. Juice is a little too light duty, SwissTool, ST300 and Surge overkill. The PST and Rebar, and occasionally SwissTool are about all I carry these days.

-
@McStitchy said:
Day 30Today I've used the PST pliers to fish out one of those hair clips from our washing machines water pump... again ::)
- Final thoughts about the PST -
For planned works around the house I often grab my Surge, while on hikes I'll take the Original Supertool lately.
For normal days I like to carry light and minimal tools that fit nicely into my pockets... like a 2-3 layer SAK or a LM Mini Tool or SideClip.
Or a small flashlight and a Vic.Spirit in a pocket caddy :P
I've never considered the PST before, and I'll have to admit that I was wrong. It's just about right for my pockets and is more versatile than the Mini Tool or SideClip
For me, the awl could be a tad more pointy and sharper.
But I'm ok with the missing tool locks for this light carry. I didn't even miss the scissors much (to my surprise).So yeah, I have another PST incoming (hopefully soon) :D

-
@Jaypeebee said:
Day 30Opening a package today, a Christmas present to myself.....
30 days have flown by, been a great challenge, thanks Steve for getting it going and thanks to everyone else for their contributions and pics

First time carrying the PST but it didn't let me down, I enjoyed using it apart from gripping the pliers (rather uncomfortable)
It seemed to have all the tools I needed in a very compact package and I will certainly carry it again in the future.Great package duty! And nice looking Gerber

-
@Max Stone said:
Day 30
Challenge has been completed, thank you Steve for this one!
0296 PST-II used for challenge on display with my others. Only a small collection, top to bottom, c1988 (no date code), 1000/1100, 0103 and my other PST-II (1298/0299 codes...must have been a long Christmas break in 98:-). These are all too clean for use, so I’m pleased that I had one I could carry.
Other than collapsing drivers a couple of times, I had no issues carrying and using my PST-II. Will definitely keep it in my rotation and will keep a lookout for more users as they come up in my neck of the woods.
Cheers,

Nice collection Max!

-
@Borg said:
Day 30 Only issues i found were the Phillips folding in on me, the scissor handles were going past the stop and the plier was a bit of a joke, i found it next to impossible to grip anything with it, no forget that..totally impossible to grip anything with it, forget holding onto any bolt with this one ;)I wont be putting this into rotation, back into the drawer with it, it is now mod fodder


Nice photo!

-
@Pauldmmwc said:
Hello day 30.
Thanks to the powers that be for organising this fine challenge. It has been a bit interesting having posted from 4 different countries ( NZ,Uk, CH and US) and those time zones.
Thanks to the team for playing your great pics.
Am looking forward to the next challenge.
Last pic - 2 of my faves- a cold one and a LM from Hooters in NYC waiting waiting for the women folk who are off shopping again.


Have another! Well done

-
Opened some packages on the final day, but no action shots, just my two PST's.
Regarding the PST as an MT, this month confirmed how much I like its form factor, its sleekness, how well it carries in the pocket, but also highlighted its shortcomings.
- exactly the same here! (Luckily my pliers stayed intact :) )
It was a busy month for me, couldn't always keep up with the gazillion new posts, but it still was a fun and interesting challenge, well done to all who took part!

Nice

-
It's been a slow challenge--I just haven't been up to much this past month--but a fun challenge. The PST has certainly earned a spot back on the roster.

Easy to carry, loads of function and utility, I find it hard to fault the ol' PST. Like a few others, I noticed that care had to be taken to avoid having a tool fold during use. However, I didn't find that to be a big issue. I'll surely be carrying the PST more in the future.

Very nice photo Nix

-
@cody6268 said:
Day 30. Carried the 1996, but both PSTs and my 1995 Mini Tool (hard to believe, in April--it's out of warranty!).All tools did the jobs necessary well. Yeah, the PST isn't linesman's pliers, and as the instructions have said--I recommend wearing gloves for really heavy gripping. But, every tool did its job. I did not really use the blades much, because the 1996's has a chipped tip, the no-date is bent. I've seen PSTs that had a hex bolt holding them together, really sharpened blades, busted drivers, and well, rough. The guy got it as a Christmas gift in the 1980s and was still carrying it. The PST is small, but built like a tank. Tell that to the ST300 small driver I've bent three times, once due to something I should not have done (bent rusted Phillips screw), the other times, light jobs. Can opener was not used at all, though I did use it on Thanksgiving, on cranberries). The PST isn't a tiny keychain tool, nor a gigantic Surge or ST300 level brute that requires a sturdy belt. It's just a simple "Pocket Survival Tool".
Now, I await my 112LT coming tomorrow, and starting on that challenge New Year's Day. PST's still getting used--I'd been using them in October and November, a lot. Juice is a little too light duty, SwissTool, ST300 and Surge overkill. The PST and Rebar, and occasionally SwissTool are about all I carry these days.

Great PST’s and looking forward to seeing your 112LT on New Years Day!

-
Pssst, Psst, PST...
Anybody notice it's DAY 30. OH THATS RIGHT! I'm running late again.
Steve thanks for hosting GREAT CHALLENGE. I purchased my PST from Folder Beholder around a year or so ago and fiddled around with it for a couple of days before putting it away. I really got it just so I could have one of the tool that started it all. Never really saw myself carrying it until your challenge. Add some locks to the drivers a saw and scissors and I definatly could. I still prefer the outside opening tools of a Vic but the PST has shown its prowess.
Well done everyone.
DAY 30
More Parts Duty....
-
Day 31
Thank you Steve for hosting and the team for the badge! This challenge has came and gone in a flash.
As Steve suggested, I think I gonna carry my PST with my SAK Mountaineer for the New year's eve. I quite like this combo of tools, the combined weight is just around 250g(8.8oz), almost the same weight as a LM Charge.

-
Day 31
You beat me to the idea Comis

As a reward for outstanding duty during this month's arduous challenge I have taken the PST II along on a city trip.
Double points to whomever guesses the city

Signing off for 2019 and I wish all of the MTO family a happy, healthy and hale 2020. See y'all then!

-
DAY 31
First I want to thank Steve for the awesome challenge and badge.

As promised some pics for the last day of the year.
The first pic is the circle without the old once with the wider pliers and the second one are these old once (US and Japan).
I wish you (MTO) and your family all the best for 2020



-
Awesome stuff to finish out Day 30 guys
and already some awesomeness fro Day 31 :o 8) I have mine with me today but I also have my BO Charge+ with me that I haven't been able to carry since OCTOBER :ahhh :D I will likely get some pics of them together and Thanks for the Challenge, Steve
and Also a Happy 2020 to all of you peeps and your families
I know 2020 is just going to be an epic year and will be glad to spend my time on here with you guys as much as I can in this coming year and hope everyone has a very blessed day today and tomorrow 
-
Day 31 of 30
Its last day of this year and i have been quite busy this morning, prepping mostly new year celebration with my kids, assembled also our daughters new telescope and PST helped unpacking it.
Thanks to Steve for hosting this awesome challenge and happy new year to everyone

-
@Douglas said:
Pssst, Psst, PST...
Anybody notice it's DAY 30. OH THATS RIGHT! I'm running late again.
Steve thanks for hosting GREAT CHALLENGE. I purchased my PST from Folder Beholder around a year or so ago and fiddled around with it for a couple of days before putting it away. I really got it just so I could have one of the tool that started it all. Never really saw myself carrying it until your challenge. Add some locks to the drivers a saw and scissors and I definatly could. I still prefer the outside opening tools of a Vic but the PST has shown its prowess.
Well done everyone.
DAY 30
More Parts Duty....
Package duty!
And congratulations!
-
Thank you Steve for hosting and the team for the badge! This challenge has came and gone in a flash.
As Steve suggested, I think I gonna carry my PST with my SAK Mountaineer for the New year's eve. I quite like this combo of tools, the combined weight is just around 250g(8.8oz), almost the same weight as a LM Charge.

Cool duo

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
