Interesting double standard
-
Yeah, although I remember some mentioning a quite similar and quite earlier non-LM design. Think it was a Buck or something...
So the Skely could also be deemed a copy too... ::) -
aww now you make me feel bad :P you got a very important point there

side note: if you copy something to make it better is an improve, if you copy something to make it cheaper is a ripoff :D
-
my opinion probably does not carry much weight on this site, but i"ll give it anyway :D. i personally think the new cutters on the 300 are way to wide and impractical in tight spaces, but thats not the topic here so let me focus.
while the 300 probably did copy gerber on the cutter issue, they copied only the cutters. but in doing so they improved upon the idea with a higher quality of cutters (154cm). gerber on the hand copied the skeletool amost to a t and then made it with their infamous pot metal. so i think the double stansard issue here is a bit exagerrated.
just my 2cents. ;) -
@nelly1974 said:
their infamous pot metal.LMFAO!!!
good one... -
@nelly1974 said:
infamous pot metal... which they copied from <insert chinese mt ripoff company>... :D
-
@Grant Lamontagne said:
I don't know if anyone has noticed this, but we have an interesting double standard- or at least it appears that way, but maybe there's more to it than is obvious?When I posted pics of the new (/topic/11095) everyone was excited to see the Gerber style wire cutters and think it's great to finally see it.
But, some time ago when Mikey posted the Gerber Crucial was berated for being a "Skeletool Knockoff."
Is it a double standard that makes it ok for Leatherman to "copy" Gerber, but not ok for Gerber to "copy" Leatherman?
Def
Well yeah it's Leatherman...take no prisoners >:D
-
As it has already been mentioned, Gerber completely copied an excellent by LM. LM copied a concept of Gerbers and improved on it. The ST300's cutters aren't triangular like Gerbers and they are made from a premium steel.
If you think about it, all the MT manufacturers copied LM's idea! SOG, Gerber, Vic, Kutmaster, and even Bear all copied LM's idea of a folding plier tool.
-
Was a little excited when I saw the picture but got more excited when I read that it has 154 cm steel replaceable wire cutters. And another thing I alway equate Gerber with not so good quality.
-
@Leatherman123 said:
As it has already been mentioned, Gerber completely copied an excellent by LM. LM copied a concept of Gerbers and improved on it. The ST300's cutters aren't triangular like Gerbers.If you think about it, all the MT manufacturers copied LM's idea! SOG, Gerber, Vic, Kutmaster, and even Bear all copied LM's idea of a folding plier tool.
Bear reversed the handles!
-
@Leatherman123 said:
As it has already been mentioned, Gerber completely copied an excellent by LM. LM copied a concept of Gerbers and improved on it. The ST300's cutters aren't triangular like Gerbers.If you think about it, all the MT manufacturers copied LM's idea! SOG, Gerber, Vic, Kutmaster, and even Bear all copied LM's idea of a folding plier tool.
well said.

-
I'm kinda with Def on this one...
I guess I just figure that any good ideas (or at least good selling) will end up being "copied". If the first company can't make a strong enough claim to take it to court, then I wouldn't fault another company for trying to get their piece of the pie. (Unless they do it in an unusually malicious way.)
And besides, if it wasn't for competition like this, we'd never have the quality or diversity we have today.

Also, I'm curious... who came up with the jigsaw blade adapter first? I think it was Gerber, right?
-
Gerber's are the only tool to incorporate a jigsaw blade. The SURGE has a T Shank adapter, which is far better than the jigsaw variety IMO
-
@NeitherExtreme said:
And besides, if it wasn't for competition like this, we'd never have the quality or diversity we have today.i agree with that.
after having seen that HIDEOUS skeli copy from gerber, it made me want the original even more.
not everyone is willing to cough up 60 or 70 dollars for a relatively fragile 7 function multi tool, so they will buy a gerber and be content with it. but the majority of people will stick to a company that is known for quality and innovativeness. thats why there are so many obsessed and addictted multi tool collecters/users like myself out there. once you feel, use and experience a quality product, something inside you says " MUST HAVE MORE!!!"
There"s a reason why a company like Victorinox has been around as long as it has.
it sure as hell isnt because of that massive Swiss military of theirs. ;) -
@Leatherman123 said:
Gerber's are the only tool to incorporate a jigsaw blade. The SURGE has a T Shank adapter, which is far better than the jigsaw variety IMOGerber uses U-shank and LM uses T-shank, but they're both jigsaw blades, right?

-
As it has already been mentioned, Gerber completely copied an excellent by LM. LM copied a concept of Gerbers and improved on it. The ST300's cutters aren't triangular like Gerbers.
If you think about it, all the MT manufacturers copied LM's idea! SOG, Gerber, Vic, Kutmaster, and even Bear all copied LM's idea of a folding plier tool.
Bear reversed the handles!
So they copied it and got it bass-ackwards... :P
Plus, since this tool is not yet available (and neither is the Crucial) everyone is just assuming that the Leatherman cutters are better than the Gerber, just as everyone is assuming the Skeletool is better than the Crucial. Gerber's carbide cutters are no joke, as I am certain everyone who has used them will attest to, and, they are three sided meaning that they don't have to be replaced as often, merely rotated to use a new edge when one is worn out. From that point of view, Leatherman's single sided cutters are not as effective in the long run.
I'm not trying to poo on Leatherman, I'm just trying to suggest that folks keep an open mind and not jump to conclusions.
Def
-
Oh yeah, and let's not forget that Leatherman was hardly the first to have a folding plier multifunction tool:
Def
-
I was once a Gerber fan boy but EVERYTHING i have that is Leatherman is quality..Pulse, Flair, Supertool, Supertool 200, Blast ....Kick (kindof a lightweight) Surge, Wave and many others. I'm fairly (80ish %) confident that the future 300 will meet my expectations.
Not bashing Gerber as i still love the MP400 and MP600. and my fisherman is great too.
-
I noticed the double standard, which Is why I mentioned gerber in the LM 300 thread. The cutters are definately copied from gerber and since the surge exchanger has been mentioned here it is also a ripoff of gerber. LM may have put there own take on it but still a ripoff.
Using other peoples ideas is not a huge deal to me but the double standard here is. Most(not all) around here will only bash gerber and never give them credit for anything.
Also love the people in this thread that are basically saying its just the cutters so no foul. (doesnt count) ::).
-
wasn't the MPT a ripoff of the PST?
-
@Leatherman123 said:
As it has already been mentioned, Gerber completely copied an excellent by LM. LM copied a concept of Gerbers and improved on it. The ST300's cutters aren't triangular like Gerbers and they are made from a premium steel.If you think about it, all the MT manufacturers copied LM's idea! SOG, Gerber, Vic, Kutmaster, and even Bear all copied LM's idea of a folding plier tool.
Leatherman didn't originally think of it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login