Swisstool or Spirit collector out there? Show me what you got.
-
G'Day,
I got myself another SwissTool yesterday. It was advertised on the local second-hand sales site for a VERY good price. The tool also included the bit driver and a number of bits.
The tool needed a good clean and sharpen. Two points of previous damage, but the owner did not try to repair it. The reamer / awl has been bent and has a few small chips in the edge. I have not tried to remove these yet. I am thinking of using a very fine metal sand paper possibly 800 / 1000 grid to get the edges off without removing any of the tool itself. The second bit of damage is on the serrated blade. It looked like the blade hit something hard and that left some marks on the tip / first serration and about 1/2 way down the blade. I got most of that out with a ceramic honing stone. The blade is now very usable and super sharp. All that was left was to put an edge on the PE blade and some oil.
While that was all sinking in, I soaked the pouch in some clothing soap and scrubbed it with a soft tooth brush. It went from dull grey to a bright original black. No damage to the sheath at all. The bit driver got a clean too, as well as the bits. I noticed that the Vic part number is stamped on each bit - some detail :D. I also added a eyeglass screw driver in the bit kit, it fits perfectly in a hex hole.
This one is going into the bike toolkit next to my LM Crunch. I am still amazed at the quality of the SwissTools, this was clearly a used, but not too much abused. One day I might get the awl fixed.
Enjoy the pics, Pete




-
Nice addition and a good fix!

-
Great job , it looks almost like new

-
That is a great looking set! Enjoy

-
GREAT GRAB Sir pietervn.

One word of caution THEY ARE ADICTIVE!!!

Now go get some MORE.

-
@Douglas said:
GREAT GRAB Sir pietervn.
One word of caution THEY ARE ADICTIVE!!!

Now go get some MORE.

:D :D You have no idea...
Another one is on its way. Sadly, I will be away when it arrives. That one is new, bo and $10 cheaper than this one. Although it does not have the additional bits... That takes my tally to 5
I am going to need some more custom sheaths. I prefer Leather to the nylon ones.This one will go down to the farm with me for some work and cooking duties. I got rid of all the nicks on the reamer but did not try to bend it straight. It will stay that way now.
And to the other comments - Thank you!!!
Pete
-
If only there was a Sabre bladed Spirit. :D
So, what do you think of that mostly serrated blade? -
12 days with the SwissTool on the farm for holidays. This has been the first time that I carried a SwissTool for such a long time. And I am impressed. We worked everyday from fencing to motorcycle repairs and food prep duties. The only bit that took some beating was the wire cutters, after cutting fence wire. It has a slight bit of a burr, but that I'll fix over the weekend. The tool stayed sharp and I must say the serrated blade is good!!! Bread, rope, meat and all sorts of other stuff - cut like it was butter!!!.
I will give the tool a good clean and touch up the blades. Then it will go onto the bike for permanent duties. I also got a BNIB BO Aussie military issue tool. That is a beauty. Pics tomorrow when it is light.
Cheers, Pete




-
Oi - Stop hoovering up all these Aussie Swisstools - Leave some for me
;) -
@Huntsman said:
Oi - Stop hoovrering up all these Aussie Swisstools - Leave some for meMaaaate, at $45 I could hardly say no. Got it today and it is BRAND NEW!!! I will take pics of it tomorrow with the older version I have. The new one has the new plier head, which I did not know exists. The box has two part numbers on it: 3.0323.3R and 4.0823.NN. From the sellers pics I could only see that it was black. He did not take a pic of the box or the Nato Number. It was a surprise when I opened it.
Cheers, Pete
-
@pietervn said:
12 days with the SwissTool on the farm for holidays. This has been the first time that I carried a SwissTool for such a long time. And I am impressed. We worked everyday from fencing to motorcycle repairs and food prep duties. The only bit that took some beating was the wire cutters, after cutting fence wire. It has a slight bit of a burr, but that I'll fix over the weekend. The tool stayed sharp and I must say the serrated blade is good!!! Bread, rope, meat and all sorts of other stuff - cut like it was butter!!!.I will give the tool a good clean and touch up the blades. Then it will go onto the bike for permanent duties. I also got a BNIB BO Aussie military issue tool. That is a beauty. Pics tomorrow when it is light.
Cheers, Pete
Great post and photo’s...looks like the SwissTool handled itself extremely well on farm duty!

That is a great looking pro dive watch! 1000 meters is way deeper than my sport diving!
I wonder how that will look with your BO??

-
I've always LOVED my Swisstool. Glad to here about your's and looking forward to seeing that Aussie. I have the one with the newest pliar head design in my collection too. Got to find one of the older ones now. Any plans for March? /topic/83628
-
G'Day,
Thanks for the complements.
Rapidray: I love this watch, the more I wear it the better it gets. Pics just for you. ;)
Douglas: I'll check the March Challenge. I am planning a week on the bike and may not have internet connection all the time.
I am proud to introduce the latest SwissTool in my collection. Another Aussie Nato one with the new plier head. The original Aussie one started my journey into SwissTools. Somehow they have accumulated over the last couple of years. Three I bought brand new, the other one was secondhand and posted a few posts prior and then the Aussie one. I also noticed that the file is slightly different on the new Bo one, more aggressive. This one will be packed away with The SwissTool X for the boy-child in the future.
Cheers, Pete




-
And some group shots
Pete




-
LOVE

The collection!!As to the challenge and your bike trip...
There have been many challenges where "catch up daily photos" were allowed and as long as it's while the challenge is running, stated before your trip and resumed with the "catch up daily photos" when you get back, I don't see a problem. Just adds to the MADNESS.

On another note...
If you wouldn't mind keeping an eye out for one of the Old School NATO's at a reasonable price, it would be a much appreciated addition to my collection.
$60-$80 US. Any NATO is prety uncomon around here. -
Thanks Douglas,
I'll keep an eye out. They are pretty rare here too. I have seen one other about a year ago and the seller wanted well over $200 for it. That is way to much for me.
Thanks for the Challenge info, I'll keep it in mind.
Pete
-
Thanks for the complements.
Rapidray: I love this watch, the more I wear it the better it gets. Pics just for you. ;)
Douglas: I'll check the March Challenge. I am planning a week on the bike and may not have internet connection all the time.
I am proud to introduce the latest SwissTool in my collection. Another Aussie Nato one with the new plier head. The original Aussie one started my journey into SwissTools. Somehow they have accumulated over the last couple of years. Three I bought brand new, the other one was secondhand and posted a few posts prior and then the Aussie one. I also noticed that the file is slightly different on the new Bo one, more aggressive. This one will be packed away with The SwissTool X for the boy-child in the future.
Cheers, Pete
Thanks!
Those are some great Aussie BO’s. And the dive watch’s are super! Again thank you!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

