Ranger Challenge!
-
That’s Florida weather! Still not used to it!

-
Lots of nice knives and pics so far today.

-
Day 02
-
These Rangers have lovely lines.

-
Day 02
Cut down some boxes using the Ranger today.
-
Day 2. Opened a ton of feed sacks once I got home.
Quick carry photo from the car while waiting for my folks to get back from a doctor's appointment. Would have posted it in the car, but my rather outdated NEC Terrain (which I won't trade in, since it has taken everything I've thrown at it, and its having a real keyboard--which most don't today) won't load MTO due to its version of Android not supporting any newer versions of Chrome. Yet, pretty much every other forum I use is not finicky at all, I guess because using phbBB and Vbulletin, which are older forum types. Thinking since this is a phone I bought, not leased from the carrier (and being "refurbished" ran out of its 30-day warranty 3 years ago), I will hack it and load a newer version of Android, but I don't think it will even hold some of the most recent.
One good addition to the bit adapter for LMs is going to your bit kit (if you don't carry the whole thing, which I don't, just the card the bit adapter is attached to) taking out the T6/T8 bit, then replacing the slotted screwdriver bit that comes with it. The Rebar already has those size slotted on board. I have no need for that bit. Yet, the now two Torx bits (little one for knives, big one for automotive), Phillips (mostly for "other side" type jobs, but it's also a No. 1 Phillips), and two hex, I always use. I had to use the T6 today to tear down a Kershaw Chive to remove all sorts of goo and gunk out of it. I gotta quit loosing my smaller Torx 1/8 drive bits... I have tons of precision screwdriver bit sets laying around, and usually, the T4-T8 bits are missing in all of them.
-
Nice EDC package.

-
@cody6268 said:
Day 2. Opened a ton of feed sacks once I got home.Quick carry photo from the car while waiting for my folks to get back from a doctor's appointment. Would have posted it in the car, but my rather outdated NEC Terrain (which I won't trade in, since it has taken everything I've thrown at it, and its having a real keyboard--which most don't today) won't load MTO due to its version of Android not supporting any newer versions of Chrome. Yet, pretty much every other forum I use is not finicky at all, I guess because using phbBB and Vbulletin, which are older forum types. Thinking since this is a phone I bought, not leased from the carrier (and being "refurbished" ran out of its 30-day warranty 3 years ago), I will hack it and load a newer version of Android, but I don't think it will even hold some of the most recent.
One good addition to the bit adapter for LMs is going to your bit kit (if you don't carry the whole thing, which I don't, just the card the bit adapter is attached to) taking out the T6/T8 bit, then replacing the slotted screwdriver bit that comes with it. The Rebar already has those size slotted on board. I have no need for that bit. Yet, the now two Torx bits (little one for knives, big one for automotive), Phillips (mostly for "other side" type jobs, but it's also a No. 1 Phillips), and two hex, I always use. I had to use the T6 today to tear down a Kershaw Chive to remove all sorts of goo and gunk out of it. I gotta quit loosing my smaller Torx 1/8 drive bits... I have tons of precision screwdriver bit sets laying around, and usually, the T4-T8 bits are missing in all of them.
Very nice Bit Kit

-
Bonus photo

-

An apple a day, keeps the challenge underway......

-
Day 3
Little guy has been exploring everything in the house, and he managed to pry letter caps off keyboard and many protectors around the corners. Ranger here helped to scrap off the old tape and sticking a new one up for his prying pleasure. :D

-
@cody6268 said:
Day 2. Opened a ton of feed sacks once I got home.Quick carry photo from the car while waiting for my folks to get back from a doctor's appointment. Would have posted it in the car, but my rather outdated NEC Terrain (which I won't trade in, since it has taken everything I've thrown at it, and its having a real keyboard--which most don't today) won't load MTO due to its version of Android not supporting any newer versions of Chrome. Yet, pretty much every other forum I use is not finicky at all, I guess because using phbBB and Vbulletin, which are older forum types. Thinking since this is a phone I bought, not leased from the carrier (and being "refurbished" ran out of its 30-day warranty 3 years ago), I will hack it and load a newer version of Android, but I don't think it will even hold some of the most recent.
One good addition to the bit adapter for LMs is going to your bit kit (if you don't carry the whole thing, which I don't, just the card the bit adapter is attached to) taking out the T6/T8 bit, then replacing the slotted screwdriver bit that comes with it. The Rebar already has those size slotted on board. I have no need for that bit. Yet, the now two Torx bits (little one for knives, big one for automotive), Phillips (mostly for "other side" type jobs, but it's also a No. 1 Phillips), and two hex, I always use. I had to use the T6 today to tear down a Kershaw Chive to remove all sorts of goo and gunk out of it. I gotta quit loosing my smaller Torx 1/8 drive bits... I have tons of precision screwdriver bit sets laying around, and usually, the T4-T8 bits are missing in all of them.
That's one functional EDC collection, awesome!
-
Powernoodle Day 03
Gotta do the apple thing.




*First, apple corers are awesome. Maybe we should do an Apple Corer Challenge. Second, the Ranger performed admirably. But the hollow grind pushed the apple apart rather than slicing all the way through. *
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
