SuperTool
-
Looking in the red circled area of that patent drawing again, (above) it's interesting to note that even back then Tim Leatherman imagined the need for locking positions at 45-degrees and 90-degrees as well.
I don't think Leatherman tools have ever had that option though have they? I know we were talking about the SOG phillips screwdriver in another thread, with its 90-degree locking notch, but I don't remember any Leatherman's that could do this?
-
This is very interesting that the locking idea was that old :o It tool Tim 11 years to bring that design to fruition :o Glad he did it is still a good sturdy lock system albeit a little tedious ;)
Sorry but I had to bring this oldie back :D
-
Yes its an interesting locking system. While the locks work good they are labor intensive. I was once showing my brother how to unlock the ST and had just told him you got to be careful so you dont cut your fingers and then proceeded to cut the !*?# out of my thumb with the SE blade.
I wonder why it was never used on the PST? Maybe they didnt think it was needed or didnt want to risk sales on a proven performer. -
The PST was smaller so I guess they figured it could handle not having a locking system :) still it would have been nice
of course if ppl had to unlock it like they do the SuperTool who knows it may have not caught on like it did :oThe world may never know :D
-
@Poncho65 said:
This is very interesting that the locking idea was that old :o It tool Tim 11 years to bring that design to fruition :o Glad he did it is still a good sturdy lock system albeit a little tedious ;)Sorry but I had to bring this oldie back :D
6 of those 11 years were probably the lawyers debating if there was any possible patent infringements and product liability.
-
I loath the original Supertool, it put me off MT's for the better part of 10 years, and all (well mostly) because of that stupid locking system >:(
-
@Micky d said:
I loath the original Supertool, it put me off MT's for the better part of 10 years, and all (well mostly) because of that stupid locking system >:(
:D -
@Micky d said:
I loath the original Supertool, it put me off MT's for the better part of 10 years, and all (well mostly) because of that stupid locking system >:(Agree mostly. Add in the extra size, with minimal improvement over the PST and I kept my SuperTool in my desk, just in case (ie not EDC)
-
@Micky d said:
@Micky d said:
I loath the original Supertool, it put me off MT's for the better part of 10 years, and all (well mostly) because of that stupid locking system >:(
:DIt is awful though, try using it with numb fingers ::)
Well I work outside and my hands usually stay warmer without gloves
Even when it's 10-20 degrees F out they are still never numb ;) Could be why I don't mind it :) The Swisstool on the other hand I can barely get them out sometimes even when I am inside my house :D -
@Micky d said:
@Micky d said:
I loath the original Supertool, it put me off MT's for the better part of 10 years, and all (well mostly) because of that stupid locking system >:(
:DIt is awful though, try using it with numb fingers ::)
Well I work outside and my hands usually stay warmer without gloves
Even when it's 10-20 degrees F out they are still never numb ;) Could be why I don't mind it :) The Swisstool on the other hand I can barely get them out sometimes even when I am inside my house :DCount yourself lucky then mate :)
I had to ride home down frozen roads on my motorbike with my Supertool in my pocket with one of the screwdriver blades sticking out because my fingers we're too numb to use the stupid locking mech >:(, needless to say I'm very glad I didn't lob it, as having an inch of rusty (yes my ST rusted nearly on a daily basis, despite constant attention ::)) steel stab me in the side wasn't very appealing :-\
So when I got home I left the ST in my knife box until i eventually sold it, and good ridance too :)
No offence to other ST users, it was a good tool for it's day, but was lousy for an all year round motorcyclist in cold, wet weather :-\
-
@Micky d said:
@Micky d said:
[quote author=Micky d link=topic=521.msg206362#msg206362 date=1242455625]
I loath the original Supertool, it put me off MT's for the better part of 10 years, and all (well mostly) because of that stupid locking system >:(
:DIt is awful though, try using it with numb fingers ::)
Well I work outside and my hands usually stay warmer without gloves
Even when it's 10-20 degrees F out they are still never numb ;) Could be why I don't mind it :) The Swisstool on the other hand I can barely get them out sometimes even when I am inside my house :DCount yourself lucky then mate :)
I had to ride home down frozen roads on my motorbike with my Supertool in my pocket with one of the screwdriver blades sticking out because my fingers we're too numb to use the stupid locking mech >:(, needless to say I'm very glad I didn't lob it, as having an inch of rusty (yes my ST rusted nearly on a daily basis, despite constant attention ::)) steel stab me in the side wasn't very appealing :-\
So when I got home I left the ST in my knife box until i eventually sold it, and good ridance too :)
No offence to other ST users, it was a good tool for it's day, but was lousy for an all year round motorcyclist in cold, wet weather :-
[/quote]No offense ;)
I can understand that completely :D -
@Micky d said:
@Micky d said:
[quote author=Micky d link=topic=521.msg206362#msg206362 date=1242455625]
I loath the original Supertool, it put me off MT's for the better part of 10 years, and all (well mostly) because of that stupid locking system >:(
:DIt is awful though, try using it with numb fingers ::)
Well I work outside and my hands usually stay warmer without gloves
Even when it's 10-20 degrees F out they are still never numb ;) Could be why I don't mind it :) The Swisstool on the other hand I can barely get them out sometimes even when I am inside my house :DCount yourself lucky then mate :)
I had to ride home down frozen roads on my motorbike with my Supertool in my pocket with one of the screwdriver blades sticking out because my fingers we're too numb to use the stupid locking mech >:(, needless to say I'm very glad I didn't lob it, as having an inch of rusty (yes my ST rusted nearly on a daily basis, despite constant attention ::)) steel stab me in the side wasn't very appealing :-\
So when I got home I left the ST in my knife box until i eventually sold it, and good ridance too :)
No offence to other ST users, it was a good tool for it's day, but was lousy for an all year round motorcyclist in cold, wet weather :-
[/quote]Was that the one you sold me ? :D
dunc
-
@Micky d said:
@Micky d said:
[quote author=Poncho65 link=topic=521.msg206682#msg206682 date=1242529044]
[quote author=Micky d link=topic=521.msg206362#msg206362 date=1242455625]
I loath the original Supertool, it put me off MT's for the better part of 10 years, and all (well mostly) because of that stupid locking system >:(
:DIt is awful though, try using it with numb fingers ::)
Well I work outside and my hands usually stay warmer without gloves
Even when it's 10-20 degrees F out they are still never numb ;) Could be why I don't mind it :) The Swisstool on the other hand I can barely get them out sometimes even when I am inside my house :DCount yourself lucky then mate :)
I had to ride home down frozen roads on my motorbike with my Supertool in my pocket with one of the screwdriver blades sticking out because my fingers we're too numb to use the stupid locking mech >:(, needless to say I'm very glad I didn't lob it, as having an inch of rusty (yes my ST rusted nearly on a daily basis, despite constant attention ::)) steel stab me in the side wasn't very appealing :-\
So when I got home I left the ST in my knife box until i eventually sold it, and good ridance too :)
No offence to other ST users, it was a good tool for it's day, but was lousy for an all year round motorcyclist in cold, wet weather :-
[/quote]Was that the one you sold me ? :D
dunc
[/quote]Nope, you got my Dad's unused one :) -
@Micky d said:
@Micky d said:
[quote author=Micky d link=topic=521.msg206757#msg206757 date=1242561340]
[quote author=Poncho65 link=topic=521.msg206682#msg206682 date=1242529044]
[quote author=Micky d link=topic=521.msg206362#msg206362 date=1242455625]
I loath the original Supertool, it put me off MT's for the better part of 10 years, and all (well mostly) because of that stupid locking system >:(
:DIt is awful though, try using it with numb fingers ::)
Well I work outside and my hands usually stay warmer without gloves
Even when it's 10-20 degrees F out they are still never numb ;) Could be why I don't mind it :) The Swisstool on the other hand I can barely get them out sometimes even when I am inside my house :DCount yourself lucky then mate :)
I had to ride home down frozen roads on my motorbike with my Supertool in my pocket with one of the screwdriver blades sticking out because my fingers we're too numb to use the stupid locking mech >:(, needless to say I'm very glad I didn't lob it, as having an inch of rusty (yes my ST rusted nearly on a daily basis, despite constant attention ::)) steel stab me in the side wasn't very appealing :-\
So when I got home I left the ST in my knife box until i eventually sold it, and good ridance too :)
No offence to other ST users, it was a good tool for it's day, but was lousy for an all year round motorcyclist in cold, wet weather :-
[/quote]Was that the one you sold me ? :D
dunc
[/quote]Nope, you got my Dad's unused one :)
[/quote]So mines never been really fast on a bike then ? :(
Dunc
-
I'm afraid not mate :D
-
@Micky d said:
@Micky d said:
[quote author=Poncho65 link=topic=521.msg206971#msg206971 date=1242609039]
[quote author=Micky d link=topic=521.msg206757#msg206757 date=1242561340]
[quote author=Poncho65 link=topic=521.msg206682#msg206682 date=1242529044]
[quote author=Micky d link=topic=521.msg206362#msg206362 date=1242455625]
I loath the original Supertool, it put me off MT's for the better part of 10 years, and all (well mostly) because of that stupid locking system >:(
:DIt is awful though, try using it with numb fingers ::)
Well I work outside and my hands usually stay warmer without gloves
Even when it's 10-20 degrees F out they are still never numb ;) Could be why I don't mind it :) The Swisstool on the other hand I can barely get them out sometimes even when I am inside my house :DCount yourself lucky then mate :)
I had to ride home down frozen roads on my motorbike with my Supertool in my pocket with one of the screwdriver blades sticking out because my fingers we're too numb to use the stupid locking mech >:(, needless to say I'm very glad I didn't lob it, as having an inch of rusty (yes my ST rusted nearly on a daily basis, despite constant attention ::)) steel stab me in the side wasn't very appealing :-\
So when I got home I left the ST in my knife box until i eventually sold it, and good ridance too :)
No offence to other ST users, it was a good tool for it's day, but was lousy for an all year round motorcyclist in cold, wet weather :-
[/quote]Was that the one you sold me ? :D
dunc
[/quote]Nope, you got my Dad's unused one :)
[/quote]So mines never been really fast on a bike then ? :(
Dunc
[/quote]:D
-
Just random thinking but maybe another reason they didn't put locks on the original PST was so that they could sell it anywhere without legal problems. When you're just starting out you don't want to lock out any potential markets.
-
More likely they simply didn't have the budget. The original Mr Crunch had to be simplified somewhat for production due to excessive cost.
Def
-
@Mike, Lord of the Spammers! said:
@Micky d said:
I loath the original Supertool, it put me off MT's for the better part of 10 years, and all (well mostly) because of that stupid locking system >:(
:DIt is awful though, try using it with numb fingers ::)
An awful lock that works every single time, never fails and has the fewest components possible though

I've said it before and I'll say it again, the Supertool is a great, zero BS tool that has great impliments and just works really well. It does all I ask of it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login