And so it begins.... (My adventures into Alox!)
-
Not too much new lately, I mostly build alot of the same. This one is a farmer but with small blade for can opener and I nipped the tip off a bit to make it fit a bit better and reshaped.
-
Nice and cool design
8) -
Ugh... family infected me good over the holidays and just finally back into the swing of things. Nothing much new except I finally thought of an easy way to include the corkscrew mini driver in the drawer I do. Just turned down the handle to 0.100" and it fits in the drawer with all the other accessories just fine.
-
Nice job on the mini driver

-
That's a right proper stocked tool drawer now!

-
Another stroke of genius mate - Great stuff
Is the handle still round? - Might be better to make it flat so it's easier to turn a screw when you grip it.
-
How about putting the Leatherman eyeglass bit in there?
Maybe make a tiny hole in a scale for a driver?
-
@ReamerPunch said:
How about putting the Leatherman eyeglass bit in there?
Maybe make a tiny hole in a scale for a driver?
Yup that could totally work.
-
Noob....head wrecked!
I've been searching and reading threads for ages but this is my first post on here. Haven't modded an SAK before. First mission is to create an Alox Rambler, taking the scales from a donor Classic.I was expecting to peen 1.5mm brass rod but read about pivot pins in this thread and they might be a great way to go. Assume I basically have to drill everything, get the pin length right and screw together?!
If I stick with peening, is there a good guide that's specific to Alox? I found guides for standard SAKs but want to know how to not damage the Alox scales.
Thanks!
Sent from my SM-G965F using Tapatalk
-
@Gobsheen said:
Noob....head wrecked!
I've been searching and reading threads for ages but this is my first post on here. Haven't modded an SAK before. First mission is to create an Alox Rambler, taking the scales from a donor Classic.I was expecting to peen 1.5mm brass rod but read about pivot pins in this thread and they might be a great way to go. Assume I basically have to drill everything, get the pin length right and screw together?!
If I stick with peening, is there a good guide that's specific to Alox? I found guides for standard SAKs but want to know how to not damage the Alox scales.
Thanks!
Sent from my SM-G965F using Tapatalk
Welcome Gobsheen to

I’ve no experience with screwed option as getting the correct parts is difficult where I live. My opinion is that this is a better option for small production runs where you can invest in setting up with the right tools and parts.
But I can comment on peening, as I’ve done about a dozen standard 93mm SAKs, mainly Cellidor, but some aluminum and brass scales like the pic below.
All I can say is practice, practice. I would not have been comfortable peening Alox in my first few builds, and even now, I know there’s a good chance I could damage some of the surrounding area of the pin as it takes many gentle hits to get the right shape of the head.
If it’s for your own pleasure, this may not be too much of an issue. But I’d suggest starting with a Cellidor SAK to get some practice.
Most of all, enjoy it. The peening process takes time but is very rewarding once done.


-
You can cover the alox scale with a bit of old inner tube from a bicycle or something, that has holes cut out where the pins are, so that if you miss the pin, you hit the rubber and not the alox.

-
@Don Pablo said:
You can cover the alox scale with a bit of old inner tube from a bicycle or something, that has holes cut out where the pins are, so that if you miss the pin, you hit the rubber and not the alox.
What he said
-
Or use some electrical tape and some guts ...
Worked for me :D
-
Thanks all!
I might change my sequence a bit. I have an Alox classic and standard rambler to start on. A bit of dismantling of both first, then try putting the cellidor scales etc onto the classic to try some safer peening. Then move onto the Alox when I've had some practice.
Another question.......when you guys are peening, do you use a small peening hammer directly onto the rivet/rod, or do you use some sort of punch for better control?
Sent from my SM-G965F using Tapatalk
-
Small peening hammer directly...I’ve tried other methods. They don’t work.
Make sure the hammer is mirror smooth to get clean hits. And the rod has a perfect cut, otherwise it distorts as you work it. I work some fairly hard hits for a while direct head-on until I get a swelling, and then begin working the edge more gently, but keeping the hammer head vertical. You have to find the maximum distance you can work from central without hitting the scale to get a good shaped peen.
Difficult to explain and probably a million ways to do it. But with a few tries you’ll find a way that works.
Good luck and show us pics!

(Pic added)

-
Brilliant.....thanks again!
I'll have to go on the search for a good hammer!
Sent from my SM-G965F using Tapatalk
-
That's a great pic Max - Thanks
Brilliant idea to start off with the flat end - I always started with the ball - But that is a much better technique
-
@Huntsman said:
That's a great pic Max - ThanksBrilliant idea to start off with the flat end - I always started with the ball - But that is a much better technique
And it underlines the importance of an immovable anvil surface! Too long I wondered my my technique took so much effort, and the reason was my immovable surface wasn't so... immovable.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login