What Traditional Knife are you toting today?
-
@David said:
Your Queen #2 sure is a sweet one. Queen historical site say the bone on your #2 is Rogers bone. Thank you for the extra pics.
I been watching the older Queen knives for a while but have only recently started to add some to my collection. They are a important part of Cutlery history.Thanks David,
I'm keeping my eye out for #16 Stockman... Might just take a little while though... 
-
Case Stockman
-
Nice one David

-
@Fuzzbucket said:
Thanks David,
I'm keeping my eye out for #16 Stockman... Might just take a little while though... 
Fuzzy / David
You don’t learn if you don’t ask...what is Rogers bone? Thanks
-
-
-
These are a good example of Rogers bone on Camillus


ROGERS BONE (c)1987 | WINTERBOTTOM BONE (c)1990
by BERNARD LEVINE * BOX 2404 * EUGENE OR 97402 * 541-484-0294
KNIFE WORLD * PO BOX 3395 * KNOXVILLE TN 37927
WHUT IZZIT NUMBER 119 NOVEMBER 1987Rogers bone was made by the Rogers Manufacturing Company of
Rockfall, Connecticut. On the telephone I interviewed Mr. Vincent
Bitel, Senior, president of the Rogers Manufacturing Company, and his
son, Mr. Vincent Bitel, Junior.
Mr. Bitel, Senior, informed me that the firm started in business in
1891, making manufactured bone products, and also bone fertilizer.
They began to make jigged bone pocketknife scales around the turn of
the century. Other manufactured bone products included combs,
toothbrush handles, baby pacifiers, and one of their biggest sellers,
corn-cob pipe bits. This particular item was discontinued in the
1950s.
Early in the century, one of this firm's competitors in the bone
business was Rogers & Hubbard. About the time of the First World War,
Rogers Mfg. Co. traded its bone fertilizer operation to Rogers &
Hubbard, and received in return the other firm's manufactured bone
products business. From that time forward, Rogers Mfg. Co. was the
nation's largest maker of manufactured bone products.
At first, all of the bone used by Rogers Mfg. Co. came from domestic
cattle. By the 1920s, and perhaps even earlier, all of it was coming
from overseas, mainly from Argentina.
Most of Rogers's pocketknife handle material was made in the
distinctive jigging pattern that collectors call "Rogers bone," but
that the firm in fact called "Rogers Stag." Rogers Stag was made
using a specially designed jigging machine which the company still
has, but that has not been used since 1962 (they have no interest in
starting it up again). They also made small quantities of other
styles of jigged bone for pocketknives.
Rogers Mfg. Co. also made jigged bone for hunting knives and for
kitchen utensils. For hunting knives, they made a style of jigging
they called "Indian Trail." This is a long random "worm" style of
jigging. Their biggest customer for bone kitchen utensil handles was
Landers Frary & Clark, who used the bone mainly on kitchen forks.
During the Second World War, Rogers's production of jigged bone
handles continued without interruption. Many of those handles wound
up on cutlery items made for the government.
The bone used by Rogers during the war was all imported. It came
from Argentina, Brazil, and a new source: Australia. The Australian
bone came mainly from old (15+ years old) tough range cattle, and so
was very thick and dense and strong. This heavy Australian bone was
used mainly for hunting knife handles.
In the 1950s, cost-conscious cutlery manufacturers began to
discontinue the production of bone handled pocketknives. Rogers Mfg.
Co. changed with the changing times, and began to offer synthetic
pocketknife handles. Mr. Bitel, who started with Rogers in 1955, was
involved in the transition. He states that Rogers Mfg. Co. was the
first firm to produce pocketknife scales made out of Delrin (a DuPont
acetal resin). One trademark Rogers used for synthetic handle
materials was Romco.
Rogers Mfg. Co. last sold bone pocketknife handle material in 1962.
The firm still supplies limited quantities of synthetic handle
material to the cutlery industry, but domestic and foreign competitors
have taken most of that specialized business away.
KNIFE LORE NUMBER 20 MARCH 1990
BERNARD LEVINE'S KNIFE LORE(c)1990 Bernard Levine, exclusive to the NKCA
WINTERBOTTOM BONE
Some time ago I received an interesting packet of information from
Steve Deer of Indiana. He used to collect Queen Cutlery Co. knives,
and one of the distinctive features of many Queens is their
"Winterbottom Bone" handles -- called by Queen, "genuine Frontier bone
stag." He discovered that Winterbottom bone was made in Egg Harbor,
New Jersey, at the eastern edge of the Pine Barrens.PHOTO CAPTION
Queen #60 barlows with Winterbottom bone.
Note the long continuous grooves.The Egg Harbor Public Library put Mr. Deer in touch with Ivor
Winterbottom, the oldest grandson of Samuel Winterbottom, founder of
Winterbottom Cutlery Works, and the last Winterbottom to be connected
with the firm. In the packet he sent me, Mr. Deer included an August
8, 1983, letter to him from Ivor Winterbottom. Some excerpts:
"A thumbnail history would start somewhere about 1885 when Samuel
Winterbottom left Sheffield for Philadelphia, leaving his wife and
three children behind. Sam's first job was peddling window glass in
the streets and glazing windows. One of his fellow peddlers
was Henry Disston, who was selling saws from a
wheelbarrow. In later years they joined forces and made special
circular saws for cutting bone. Some time before 1890, Samuel
Winterbottom moved to Egg Harbor City, New Jersey, and sent for his
family.
"In 1890 he set up his first shop ... Winterbottom Carter. S.W. was
the craftsman, Carter the desk man (book keeping). As time passed,
Samuel's four sons entered the business: Harry, Jack, Ernest, and Fred
(born in the U.S.).
"When the U.S. entered World War I [April 1917], the factory began
making handles for knives and bayonets. Carter, being of Quaker
belief, would have nothing to do with war materials and left the
company. Up to this time, most of the work was done by hand. Orders
were so heavy the brothers designed and hand built machines that kept
125 men working six days a week. After the war, the brothers
continued to make handles from bone, wood, celluloid, and other
materials for almost everyone in the cutlery industry. ... Some of
our customers I can remember were Schatt & Morgan (before 1920),
Queen, Imperial, Camillus, Cattaraugus, and Ka-Bar. There were 10 or
12 more, but I can't think of them right now.PICTURE CAPTION
Winterbottom Cutlery Works, Egg Harbor City, New Jersey, 1925."The first [bone] stag of the [Winterbottom] type came to life
during this period. It was all done by hand, and I had many blisters
to prove it. Fred decided we had to have a machine to do this job.
As you know, every piece of real deer-horn stag is different. To make
a machine that would make different patterns was quite a chore.
"Finally it was made, and we thought we had the industry sewed up.
But some fellow smarter than we were bought up some knives [with our
handles], pulled off the handles, made molds, and cast [copies of] our
handles in plastic. This, combined with U.S. Department of
Agriculture restrictions on foreign bone, and with a Brazilian embargo
on rosewood, made things so expensive, that [our operation] could no
longer survive. In 1968 I sold the business to one of our customers,
who makes wood and plastic handles for their own use."
A biography of Samuel Winterbottom in the 1924 volume, South Jersey
-- A History, provides a little more accurate information on the early
history of the Winterbottom family and firm.
"John Winterbottom, Mr. Winterbottom's father, was born and died in
Sheffield, England, and was a bone-cutter by occupation, his trade
linking his name with the world famous cutlery manufacturers of that
city. The family had followed similar lines of activity in England
for 130 years. ...
"Samuel Winterbottom was born in 1857 ... and early in life became
employed as a bone-cutter and manufacturer of handles of all kinds for
knives, in association with his father."
According to this book, Samuel worked in the paper industry in
Philadelphia, Valley Forge, and Egg Harbor until 1891, when he set up
in the handle and novelty business. He started with one employee. A
year later he had four, and moved to a larger building.
By 1924 Samuel Winterbottom had 100 people on his company's
payroll. Amber and tortoiseshell handles were a specialty. His
eldest son, Harry, born in Sheffield in 1880, was then the firm's
business manager. His second son, John, born in 1885, was factory
superintendent. His third son, Ernest, born in 1886, and his
youngest, Frederick, born in New Jersey in 1898, were both factory
foremen.
-
@Rapidray said:
Fuzzy / David
You don’t learn if you don’t ask...what is Rogers bone? Thanks
Here is a link to help in your research Ray. A thread on Rogers Bone over at AAPK. One of the things that can be hard in identifying Rogers Bone is they had more than one jigging style. The jigging style that Steve has shown is more common and easy to identify. The Rogers bone that is on Fuzzys #2 and my #15 Queen knives often get over looked as Rogers bone cause the jigging is a little different than the style Camillus and others used. Clear as mud aye. :D
-
@David said:
Here is a link to help in your research Ray. A thread on Rogers Bone over at AAPK. One of the things that can be hard in identifying Rogers Bone is they had more than one jigging style. The jigging style that Steve has shown is more common and easy to identify. The Rogers bone that is on Fuzzys #2 and my #15 Queen knives often get over looked as Rogers bone cause the jigging is a little different than the style Camillus and others used. Clear as mud aye. :DThank you sir! Will be tagging the link for later tonight!

-
Excellent information thanks Steve

-
Today’s

-
Nice one Rapidray

-
The Buck 301

-
-
Nice pair of knives Steve

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



