BO Charge Titanium Handle Help!
-
Oxidizing=Steel
Anodizing=Al/Ti other Metalshttp://en.wikipedia.org/wiki/Bluing_(steel)
http://en.wikipedia.org/wiki/AnodizingI thought it was Spoonrobots post that I was thinking about but I wasn't 100% sure.
LM123 use this Charge on all your really dirty MT tasks that way it won't bother you if it gets worse -
If you're going to paint it... don't use enamel..
the reason that you could easily scratch it after coating it a second time was that the enamel didn't cure. (enamels take at least 3 months to fully cure, normally closer to a year in decent temp.)
I suggest using lacquer or urethane paints to patch up.
As I'm not sure what they used to mock the BO on the titanium handles I won't suggest what to use to remove the previous paint you used.If you're wanting a perfect surface, I would suggest striping all the mock BO, prime (you will have to find a metal primer that can bite into ti), then have it coated by someone good with an airbrush using urethane paints (same stuff they use on real cars). Like Sean suggested an auto body shop may be the best choice.
Plastic modeler for 10 years,
Steve
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login