Ranger Challenge!
-
@Rapidray said:
Oh boy, so a new blade then. Wonder what the cost would be?According to the Buck site, $10. Plus UPS or USPS shipping, which ain't cheap for UPS particularly, as honestly, I don't like dealing with one particular post office (actually, more or less the destination hub for several towns around here) around here when it comes to knives. Because the one for my town is located just across the street from a cutlery store who also as a website they sell through, I seem to have no trouble at all with them no matter what the knife (a couple of Leathermans, and two tactical Gerbers; an MP600 AR sight tool, and an EZ OUT), but the post office I mentioned threw a fit over three SAKs (84mm, 93mm, SwissTool). At least unlike Emerson (who charges $100!) Buck doesn't ask as much as a new knife just to have a blade put in, no matter what the model or steel.
@comis said:
Good luck with that, I am sure this knife is probably filled with good memories, and let's hope the cost is not too high and you get to keep the handle.
This one I bought secondhand, thinking the blade only needed a sharpening. Turns out, I was wrong and have a trainwreck on my hands that only Buck can fix. Buck says they'll polish up the handles and bolsters while they're working on it. Wood is a little bit chewed up, however. But, my 110 isn't much nicer, and it was my great-uncle's work knife. It's got some grinding damage, but not as much blade wear. That one is staying as-is due to sentimental value. I try to not carry it as much (with a total of 3 110s in my possession, soon to be four), but the 440C steel is what keeps it in my pocket (or belt--this thing's heavy!). Plus, Buck 440C seems tougher than what the Italians use and does not chip. Luckily, at $15 for knife ($20? counting the shipping--I've had the knife 3 years!) plus $10 for blade and whatever USPS or UPS shipping will be, I still have a little less in it together than I would if I went to the knife store and picked up a new 112 (and if I did, it would be a finger grooved model). Sure wish Buck would have finger-grooved 112LT, as they did the Bucklite in the '80s.

-
Day 18.
The 110 in 440C ('74-80) was really the knife that started it for me in terms of Bucks, and was among the first larger knives I had. I already owned a 301 advertising a local quarry, but I refused to carry it (it is in new condition). My great-uncle bought it new, and used it as a work knife for many years. I inherited it in early 2015, and really came to love it as a larger folder for just about everything. While I have bought two since (a 2016 in 420HC, and a 112LT in CPM-154) it sees second use to the CPM-154 one. The 440C outlasts the 420HC by double.

-
Day18
-
@Borg said:
it sure would, i would like a fully serrated lightweight as a second blade and that would have been perfectDay 16

Buck does offer partially serrated blades in the custom shop for the 110, but I don't know if they offer them for the 112 or not. But, I'd really like to see Buck drop a 110 partially serrated blade in an LT 110 frame and see how it would sell. A ton of folders have PE, SE, and partially serrated options on the same knife.
-
@LoopCutter said:
Day 18 - Long day today, escorted younger grandson to his Y Swim meet which lasts all day while his mom was at older brothers conference meet. No need for my 112 there at all :(The at home took Mrs LC our for dinner and now at home relaxing with a copy of magazine I need to review...
Nice reading material and Ranger

-
@cody6268 said:
According to the Buck site, $10. Plus UPS or USPS shipping, which ain't cheap for UPS particularly, as honestly, I don't like dealing with one particular post office (actually, more or less the destination hub for several towns around here) around here when it comes to knives. Because the one for my town is located just across the street from a cutlery store who also as a website they sell through, I seem to have no trouble at all with them no matter what the knife (a couple of Leathermans, and two tactical Gerbers; an MP600 AR sight tool, and an EZ OUT), but the post office I mentioned threw a fit over three SAKs (84mm, 93mm, SwissTool). At least unlike Emerson (who charges $100!) Buck doesn't ask as much as a new knife just to have a blade put in, no matter what the model or steel.This one I bought secondhand, thinking the blade only needed a sharpening. Turns out, I was wrong and have a trainwreck on my hands that only Buck can fix. Buck says they'll polish up the handles and bolsters while they're working on it. Wood is a little bit chewed up, however. But, my 110 isn't much nicer, and it was my great-uncle's work knife. It's got some grinding damage, but not as much blade wear. That one is staying as-is due to sentimental value. I try to not carry it as much (with a total of 3 110s in my possession, soon to be four), but the 440C steel is what keeps it in my pocket (or belt--this thing's heavy!). Plus, Buck 440C seems tougher than what the Italians use and does not chip. Luckily, at $15 for knife ($20? counting the shipping--I've had the knife 3 years!) plus $10 for blade and whatever USPS or UPS shipping will be, I still have a little less in it together than I would if I went to the knife store and picked up a new 112 (and if I did, it would be a finger grooved model). Sure wish Buck would have finger-grooved 112LT, as they did the Bucklite in the '80s.

In the end you will have a almost new knife that will provide years of service!

-
Bonus photo
Afternoon chip snack
-
Day 19
Son, someday all these will be yours, and hope you will enjoy the hobby as much as I do.

But for now, paws off your old man's Ranger! >:( :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






