Why lock blades?
-
@cbl51 said:
Whats not to like???The simple statement that you make about how they offer the safety of a fixed blade tells me that you totally miss the whole point. They do NOT offer the safety of a fixe blade. That is an illusion put out by the knife manufacturers to sell their over hyped and over priced knives.
This is the third time I've seen a young man get very seriously injured by a "locked" knife. All three of them had one big thing in common; they all were amazed and even dumfounded that the knife folded on them when pushed. All the way to the hospital, John kept repeating to himself that he didn't understand what happened, the blade was locked. And John is soooo typical of the young men of his generation.
John grew up in a typical Southern California mega suburbia. His father was an engineer with lots of lab experience endnote an outdoorsman. He knows very little about knives, and bought what was a highly advertised knife, a ZT with tiger stripes on the blade. Tiger stripes????
Like most the guys ins generation, he never even handled a slip joint, and his sole knife experience was the one hand wonder lock blades. He never learned proper safe knife handling, and when I tried to gov him some fatherly advice, his reply was "That's okay, I'm not using one of those old fashioned knives that don't lock." He was convinced that he had the ultimate folding knife that would never fold on him because of the mighty lock. Now he has a partly disable right hand and is looking at an operation by. a hand speSmurfpillst to restore full use to this right index finger, which the stitches are now out, but it doesn't work much.
Theres a whole generation of guys that have b been taken in by the knife industry. The industry has created an artificial market to stimulate sales by pushing a BS product. A product that is an accident waiting to happen.
In the old days, a man carried a pocket that had a couple blades, and would fold up on him if he acted stupidly with it. if he needed a stronger blade, he'd use a fixed blade, as it is called now. Darn near every man had a small fixed blade. They were made by Case, Kabar, Western, Camillus, Buck, and others. They were not expensive as there was not much to them. A blade and a handle and a sheath to put them in. The could not fold up unless you actually snapped the blade off, and that took a real effort.
There is absolutely nothing that a lock blade can do that a fixed blade can't as well if not better and safer.
cbl!It's an unfortunate aspect of our culture. A vast majority of us drive like our brakes won't fail. walk like the floor isn't slippery, cut like the lock won't collapse. And then we sue the manufacturer or owner.
In my less-foolish, not-yet-wiser years I only really ever use two locking knives: a Victorinox and a Camillus, not counting pliers based MTs. I open them carefully with two hands (assuming the back spring will overcome my strength, and I use them as if the lock will fail. Then, harkening back to the "snap or pinch closed" debate, I pinch them closed under the assumption that my fingers can slip into the slot of the handle.
As always, your posts are appreciated.

-
@SteveC said:
That's painting it with a pretty broad brush
Lockbacks with OHO have their place and uses, this is coming from someone who pretty much carries slipjoints only. I do use a modern OHO locker for a work knife as it is much safer for rough use.
Painting with a broad brush gets the job done faster.
I'm sorry but the elephant in the room should be addressed. I grew up watching and learning from men who just got back fighting a world war. They didn't feel the need for a locking blade knife, and they did the job of life very well. In fact, the only people who carried knives with locking blades in my youth were the punks. The Italian style switch blades and stilettos that were some kind of a badge of manhood. The modern one hand flipper is the modern switch blade for the wannabe James Dean's of our age.
Safer for rough use????
Is there anything that lock blade will do for you that a Buck 102, Esee Izula, Matini puuko, Mora fixed blade or any other trout and bird size sheath knife will do? Aside from fold up that is?
Come on, are you really going to say that a small fixed blade will not stand up to "rough" work better than any folding knife?
There comes a point where the tool become a weapon because of design.
-
Your posts have come off as bitter and angry.
Too bad.
-
You are obviously looking for a fight. I never said anything about a lockback being better suited than a fixed blade for rough use.
A modern lockblade it definitely more suited for rough use than a slippie. ;)
All knives are weapons if used as such, I'm done here .
-
as an aside - I like to have an awl on my EDC because I think its a safer method of stabbing into things, not just wood and leather, but cardboard, sacks, plastic, etc.
-
cbl51
You sound like someone who's son in law hurt himself badly with a lockback knife.
Wishing him a speedy recovery, and some comfort for you and your family
-
@ElevenBlade said:
as an aside - I like to have an awl on my EDC because I think its a safer method of stabbing into things, not just wood and leather, but cardboard, sacks, plastic, etc.As an aside to the aside - I find myself wanting locks more often for awls and screwdrivers than for knives.
On another aside - adjusting the spring on a slip joint folding tool is a balance in itself: Too little and it folds back too easily. Too hard and people might mistake it for a lock and when it does fold back it does so sudden and with power. I'd prefer an honest lock over a very hard spring.
-
Great perspectives. Thank you guys for the read.
-
@cbl51 said:
There comes a point where the tool become a weapon because of design.@cbl51 said:
Some knife that can be flicked open with one hand and blade locks, is a weapon.Those two statements right there are about the two biggest piles of bravo sierra I've seen in some time. Anything held in your hand can be used as a weapon even your SAK and 301.
-
A wooden spoon wielded by an angry grandma Has been used as a weapon against unruly kids more times than grandpas pocket knife, weather locking or slip joint.... ;)
-
I think the popularity of lock blades is cannot to three aspects in modern society
- society’s perception of knives
- current laws and their interpretation
- rural vs urban life
Society’s perception of knives has drastically changed over the years. Many people, especially in cities, view anything over the size of a SAK or small traditional knife as a weapon. Most of your statement of not needing a lock blade is because you are pairing a slip joint and a sheath knife. Well, in many places in modern society, if you are visually carrying a sheath knife then you might get the police called on you or at the very least confronted about why you are carrying a weapon. A lock blade folder will never be as good as a sheath knife but at least I can shove it in a pocket where it is not drawing attention until I need it. As long as I know the limitations then it is better suited for tougher tasks then a slip joint and more acceptable by much of society than a sheath knife, so it is a compromise.
When I was growing up, I was given a camp knife ant 8 and carried a knife every since. I was given my first sheath knife at 12 and carried that a lot when planning on doing stuff outside. No one thought anything of it. Now in that same state, children under 16 may not possess a “dangerous knife”. “Dangerous knife” is up to the interpretation of LE and prosecutors, but I’m pretty sure most sheath knives would be interpreted as such, where as a lock blade might escape. Some states have laws against “Bowie knives” lr “dirks”, etc. Again the term is not legally defined. A knowledgeable person may be able to explain differences, but that is not the majority of society. If asked some will say a “Bowie” is just another name for non-folding non-kitchen knife. Then the law adds in terms such as “like kind” or “similar” and the area of legally acceptable gets even slimmer. If the description says “Bowie style” blade then even a small blade could be that. A “tanto” blade could be “similar” to a dirk because it has 2 sharpened edges and a point. That may seem stupid, but for some that is the environment that we live in.
The situation is even worse if you are in a city because knives are viewed by many as weapons and not tools. And anything bigger than a small pocket knife that is visible becomes “he has a weapon”. If in remote areas there is not as much thought given, but even in some areas and especially cities, many don’t see a need for a knife, until they need one, because it is perceived as a weapon, especially if visible sheath knife.
So yes, a slip joint and a sheath knife are better utility, but based off environment, laws and perception sometimes a compromise is required and during those times a lock blade is very useful.
-
I've seen people on youtube review knives and multi-tools, and damning them for being slipjoint, as if they'll spontaneously set their users on fire or something.
It goes beyond knives, though. Remember when you looked left, then right, and crossed the road? My school did not have a crossing guard. Despite that, I am still alive. But nowadays you need a crossing guard because kids are becoming less aware of how the world works.
-
By that estimation, a screwdriver, pencil, or guitar string can be a weapon too.
Not to be contrarian, but then were do you draw the line?
Again, trying to tread lightly, and not having an answer in my own personal viewpoint.
The law of the place I live considers a OHO lockback a weapon, whereas a slipjoint is not.
I ask you. How is that BS? If I venture out of my neighborhood and carry a OHO lockback I will be arrested for carrying a weapon. If I carry a Vic Spartan, I won't. Period
You can use your personal judgment, or you can go by what the law says.
However, calling BS on where somoene draws that line without drawing their own is nothing more than an ad hominem fallacy.
Again, I'm not saying I agree with, or like this very circular distinction. I am saying that it's a strongly enough held distinction to consider a benchmark of sorts, and it's worth considering the why's and wherefores.
-
I grew up using non-locking blades and using the proper tool for the job. So to me I never push a folder past it’s limits and view a lock as a safety back up.
So yeah totally agree with the post and feel like folks who get injured just suffered through some bad luck or overestimated the tool unfortunately.
-
If you handle knives on a daily basis you´re bound to cut yourself sooner or later... This is true for slipjoints and lockblades alike. The last time I cut myself seriously was through no faulty lock but rather through a user error. :ahhh
I like slipjoints and backlocks, and find neither unsafe when used properly. :)
I don´t trust liner locks, especially since some manufacturers started adding extra locks to lock the liner lock. ??? -
@cbl51 said:
This whole post came about because this morning our daughter called and told us John, my son-in-law, had got his stitches out. He had cut himself quite badly while we were out there visiting for the new year, with one of his large lock blade one hand opening knives.Just curious. What brand knife and type of lock was he using?
-
@OldBoy2016 said:
Just curious. What brand knife and type of lock was he using?He mentioned Zero Tolerance Knives
-
@ElevenBlade said:
He mentioned Zero Tolerance KnivesThanks! Sorry must have missed in the thread. Interesting as ZT is a good brand. Must have been a frame lock. Maybe an early lock up so that it wasn’t engaged enough? The only time I’ve heard of a framelocks fail is when tortured miserably.
-
@Ron Who said:
If you handle knives on a daily basis you´re bound to cut yourself sooner or later... This is true for slipjoints and lockblades alike. The last time I cut myself seriously was through no faulty lock but rather through a user error. :ahhhI like slipjoints and backlocks, and find neither unsafe when used properly. :)
I don´t trust liner locks, especially since some manufacturers started adding extra locks to lock the liner lock. ???I find this very true. Proper use and safety are key with whatever type of knife you use. Slip joints and sheath knives can bite if misused just like lock blades. One of my worst cuts was a sheath knife, but as you said it was user fault not blade.
They can also all fail depending on quality and use. I have even seen a sheath knife fail and a lock blade finish the job, but it was a matter of poor quality versus good quality not lock vs not.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
